Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-12-2011, 07:58 PM | #1 |
Registered User
Join Date: Dec 2009
Location: Durham,NC
Posts: 636
|
GM serpentine belt system ?
What year 4.3 do you get them from and guessing you take everything correct? Anyone wanna give break down? Thanks
|
01-12-2011, 11:04 PM | #2 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,280
|
Re: GM serpentine belt system ?
The 4.3 was put in mid year 88 in the s10. The braket in 88 was a steel one piece and is not the most desirable. In 89 the most common two piece bracket was used in the s series as well as the c-k full sized trucks. That braket remained basicly unchanged untill 96 when the vortec styled motor came out [4 bolt on intake per side]. 96 -99 had a bracket that mounted the alt on pass side a/c on driver side [that backwards from the other stlye] You will also need the water pump and the fan and clutch to keep from overheating as they turn backwards from the v-groove type water pump.If you happen to find a set up that has a smog pump it can be removed as some trucks can from the general without them starting in 90 I think if I remember right.You can change the pressure valve on the back of your pump andnot have to change your pressure line or you can buy an adapter if you want the tighter feel that the newer pump will give. If I have left anything out I'm sorry. If you need more help I will be to and others will chime in to fix my statments if incorrect.Jim
|
01-12-2011, 11:33 PM | #3 |
Registered User
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,005
|
Re: GM serpentine belt system ?
my serpentine setup is off a 4.3 unknown year i took everything off the front of the motor water pump, alternator, brackets, i then bought the ac compressor delete pulley and the 1 wire adapter for the alternator i do not have the part numbers on either of them but if you do a little searching around on the board you will find the part numbers, also good luck on the belt, that was the worst part of it was finding the right belt i even measured and double checked it still took 3 or 4 tries...
__________________
*SOLD* 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride |
01-13-2011, 12:24 AM | #4 |
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: GM serpentine belt system ?
im running a setup from a 88-92 V-8 F-body.
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE" |
01-13-2011, 12:30 AM | #5 |
gets board easy.......
Join Date: Mar 2009
Location: Colorado Springs
Posts: 717
|
Re: GM serpentine belt system ?
Why don't you run Chevy truck stuff, mid 90's
Posted via Mobile Device |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|