The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-21-2011, 03:39 PM   #1
JJorgensen52
Simple? What's simple?
 
JJorgensen52's Avatar
 
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
OEM Dana hub question

For you OEM parts gurus:

I've been doing a bunch of research, and it indicates my truck should have yellow hub knobs in the OEM Dana 44 hub locks, with SPICER stamped into the knobs.

I also understand that the red knobs should have FORD stamped into them.

The question is, the hubs on my truck are the correct Dana 44 internal hub locks, but my knobs are unmarked and they're red. No SPICER, no FORD, nothing stamped on the knobs at all.

Did such a thing ever exist (maybe with a spicer decal like the Dana 60 had)? Or are these some kind of old aftermarket knobs?

also, were there ever blue knobs for the internal 44 locks?
__________________
CURRENT
'50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build
'63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos
'66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos
'69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!)
'72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh
'99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily)
'99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs)
SOLD
'71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)
JJorgensen52 is offline   Reply With Quote
Old 01-21-2011, 10:52 PM   #2
BIGBLU 72
Registered User
 
BIGBLU 72's Avatar
 
Join Date: Dec 2008
Location: Ashland, KY
Posts: 700
Re: OEM Dana hub question

we have had three blazers 70,71,72! the 71/72 both had blue lockouts and the 70 had red lockouts with SPICER on them. the 70 was a three speed and a Dana transfer case i think?
__________________
68 C10 LWB 2/4 drop 406/th400/3.73posi
04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD
BIGBLU 72 is offline   Reply With Quote
Old 01-22-2011, 12:16 AM   #3
JJorgensen52
Simple? What's simple?
 
JJorgensen52's Avatar
 
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
Re: OEM Dana hub question

Interesting, red with spicer markings.

I probably should have mentioned years before - my truck is a '69, but it has a december '68 build date and I have the closed knuckle dana 44 (which was last used in '68, my research shows), and a few other '68 leftover parts.

anyone with '67, '68 or '69 4wds want to chime in?
__________________
CURRENT
'50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build
'63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos
'66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos
'69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!)
'72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh
'99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily)
'99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs)
SOLD
'71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)
JJorgensen52 is offline   Reply With Quote
Old 01-22-2011, 12:20 AM   #4
jerry moss
Born Psycho
 
jerry moss's Avatar
 
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,915
Re: OEM Dana hub question

Quote:
Originally Posted by JJorgensen52 View Post
Interesting, red with spicer markings.

I probably should have mentioned years before - my truck is a '69, but it has a december '68 build date and I have the closed knuckle dana 44 (which was last used in '68, my research shows), and a few other '68 leftover parts.

anyone with '67, '68 or '69 4wds want to chime in?
the closed knuckle 44 was used in 69, in 70 it was open knuckle 44 with drum brakes and from 71 on up it was open knuckle with discs. not sure on exact year GM switched to the corp 10 bolt-77 i believe.
__________________
jerry moss
72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD
69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies.
73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog.
77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW
BRENTWOOD,CALIFORNIA
jerry moss is online now   Reply With Quote
Old 01-22-2011, 12:36 AM   #5
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,768
Re: OEM Dana hub question

I *think* 69 and 70 did use red on the blazers, but not aware it had spicer on it. I thought they were plain. Not sure what the trucks would have in 69-70. I think also that some of the 3/4 ton gmc trucks (big hub) used the red with no markings.
I am just going off of trucks i have seen and brochure pics, and can't really document.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com