The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-29-2011, 11:38 PM   #1
RWilliamsGa
Registered User
 
Join Date: Nov 2010
Location: Silver Creek Ga
Posts: 12
LMC Rubber

What is everyones opinion on LMC rubber- weatherstripping.etc. I have been less than thrilled with it .The rear window rubber was too big had a terrible time getting it in am still not thrilled with the way it fits.On the window weatherstripping for the front doors the windows will not roll up without helping it getting the top of the door it rolls up good till it gets to the top edge of the door at that point the rubber appears to sqeeze the glass too tight thus you have to help it get to the top of the door I took it apart so many times today I could do it blindfolded I am hoping it will free up with use I spent about 5 hours today on 1 door. Keep in mind I am no novice at this as I have built and restored VW'S Street Rods etc for myself and others. Just wondering is this a common problem with LMC products or a common complaint with everyone's products my dad say's nothing today is worth a sh#$ LOL .He just did a 64 El Camino for himself and he said the rubber and stuff did not fit worth a sh#$ on it either do not remember what brand it was.

Last edited by RWilliamsGa; 01-29-2011 at 11:39 PM.
RWilliamsGa is offline   Reply With Quote
Old 01-30-2011, 04:06 PM   #2
lilpoindexter
Registered User
 
lilpoindexter's Avatar
 
Join Date: Sep 2010
Location: los angeles
Posts: 1,134
Re: LMC Rubber

LMC = junk. I bought hard brake lines that go to the master cylinder, that curve INTO each other...so instead of the lines making two seperate coils at the master cylinder, they make one big one.
lilpoindexter is offline   Reply With Quote
Old 01-31-2011, 11:09 AM   #3
swb85
On a budget like Fred Sanford
 
swb85's Avatar
 
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
Re: LMC Rubber

Quote:
Originally Posted by RWilliamsGa View Post
What is everyones opinion on LMC rubber- weatherstripping.etc. I have been less than thrilled with it .The rear window rubber was too big had a terrible time getting it in am still not thrilled with the way it fits.On the window weatherstripping for the front doors the windows will not roll up without helping it getting the top of the door it rolls up good till it gets to the top edge of the door at that point the rubber appears to sqeeze the glass too tight thus you have to help it get to the top of the door I took it apart so many times today I could do it blindfolded I am hoping it will free up with use I spent about 5 hours today on 1 door. Keep in mind I am no novice at this as I have built and restored VW'S Street Rods etc for myself and others. Just wondering is this a common problem with LMC products or a common complaint with everyone's products my dad say's nothing today is worth a sh#$ LOL .He just did a 64 El Camino for himself and he said the rubber and stuff did not fit worth a sh#$ on it either do not remember what brand it was.
I bought all new rubber from LMC for my truck back in October, it's perfectly fine and all fit very well. Sounds to me like your power window motors are about shot. I replaced both window motors and lubed the tracks when I did the weather stripping-----there's no way my old tired motors would have pushed the windows up into the new tight weatherstripping all the way. The rubber breaks in eventually and it's not as tight.....but you need good motors!
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread
'98 Camaro z28: 370ci twin turbo 370ci build
'01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD
swb85 is offline   Reply With Quote
Old 01-31-2011, 09:04 PM   #4
camshaftgsxr
Registered User
 
camshaftgsxr's Avatar
 
Join Date: Feb 2010
Location: Asheville, N.C.
Posts: 785
Re: LMC Rubber

lmc rubber is bad stuff, there is better stuff out there, also never order the lmc glass its just not shaped right
__________________
camshaftgsxr is offline   Reply With Quote
Old 02-04-2011, 04:07 PM   #5
BigSwid79
Registered User
 
BigSwid79's Avatar
 
Join Date: Jan 2011
Location: Manistee, Mi
Posts: 112
Re: LMC Rubber

I recently purchased Lmc's rubber for my windows on my truck and it didn't fit very well. My vent windows hardly seal but it should work. I don't know if it was just the batch I ordered or what... I don't think anyone else sells the stuff so LMC is really like your only choice.

Swid
BigSwid79 is offline   Reply With Quote
Old 02-04-2011, 07:49 PM   #6
Blue Chevy 1987
Registered User
 
Blue Chevy 1987's Avatar
 
Join Date: Aug 2010
Location: Virginia Beach, VA
Posts: 64
Re: LMC Rubber

classicparts.com
Blue Chevy 1987 is offline   Reply With Quote
Old 02-05-2011, 07:27 AM   #7
73gmc454
Registered User
 
73gmc454's Avatar
 
Join Date: Dec 2010
Location: louisville ohio
Posts: 375
Re: LMC Rubber

This really scares me, I've heard this before , I'm not real impressed with a few other items I got from them
73gmc454 is offline   Reply With Quote
Old 02-05-2011, 08:28 AM   #8
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: LMC Rubber

Some of the GM stuff (window run channel) I bought didn't fit worth a flip either. After a couple hours of adjusting the window tracks I can finally roll up my windows without cussing.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 02-05-2011, 08:44 AM   #9
ozark
Registered User
 
Join Date: Jan 2008
Location: Eureka Springs AR
Posts: 179
Re: LMC Rubber

I bought a lmc windshield gasket and it was junk, way too big and tore easily while trying to install it by a profesional windshield installer. I also wasn't happy with thier packaging, I also bought new wheelwell chrome and they folded it in half to fit in the box.

Last edited by ozark; 02-05-2011 at 08:45 AM.
ozark is offline   Reply With Quote
Old 02-05-2011, 11:56 AM   #10
87 chevy silverado
Account Suspended
 
Join Date: Apr 2009
Location: lexington South Carolina
Posts: 2,124
Re: LMC Rubber

Quote:
Originally Posted by ozark View Post
I bought a lmc windshield gasket and it was junk, way too big and tore easily while trying to install it by a professional windshield installer. I also wasn't happy with their packaging,
x2 on this... my buddy bout a rear gasket set for his 68 (BIG) back window and the rubber was to big ....
87 chevy silverado is offline   Reply With Quote
Old 02-05-2011, 01:21 PM   #11
72lb4x4
Account Suspended
 
Join Date: Jul 2006
Location: DFW
Posts: 1,427
Re: LMC Rubber

LMC doesn't make anything, just as Goodmark for example and other sellers don't make anything. They just buy stuff and sell it. Whether or not LMC buys stuff of lesser quality is the question. Many grumble about their customer service and stop buying from them.

Did the rubber say made in China? If it did it'll probably deteriorate in a year if the truck lives outside.
72lb4x4 is offline   Reply With Quote
Old 02-05-2011, 02:38 PM   #12
flamingbig10
6.0 powered square
 
flamingbig10's Avatar
 
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
Re: LMC Rubber

I ordered a complete door weather stripping kit from ebay years ago and vent window weather stripping didn't fit very well and deteriorate in a year and my truck was in the garage most of the time so got some from classic parts and no problems with it and they've been on for 3 years
__________________
Aaron
1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot
Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326
flamingbig10 is offline   Reply With Quote
Old 02-05-2011, 02:43 PM   #13
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: LMC Rubber

Since this thread started I've been looking for a guy on eBay I bought a kit from 6-7 years ago for my S-10. The rubber still looks and functions as new, I'll keep looking.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 02-05-2011, 03:44 PM   #14
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: LMC Rubber

Quote:
Originally Posted by S10Fan View Post
Since this thread started I've been looking for a guy on eBay I bought a kit from 6-7 years ago for my S-10. The rubber still looks and functions as new, I'll keep looking.
OK, I just finished going through a million pages of feedback, the guy is no longer a registered user. Bummer.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 02-05-2011, 02:54 PM   #15
gnstalodz
Registered User
 
Join Date: Jul 2010
Location: dublin, ca
Posts: 155
Re: LMC Rubber

I'm looking for the cheapest weatherstripping for my doors on the 72. LMC is probably the cheapest though hu?
gnstalodz is offline   Reply With Quote
Old 02-05-2011, 03:45 PM   #16
RWilliamsGa
Registered User
 
Join Date: Nov 2010
Location: Silver Creek Ga
Posts: 12
Re: LMC Rubber

Do not I repeat do not take the cheap way out you will be sorry being a first class tight a$$ myself I always do and always regret it spend the extra money !!!!!!
RWilliamsGa is offline   Reply With Quote
Old 02-05-2011, 03:53 PM   #17
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
Re: LMC Rubber

Quote:
Originally Posted by RWilliamsGa View Post
Do not I repeat do not take the cheap way out you will be sorry being a first class tight a$$ myself I always do and always regret it spend the extra money !!!!!!
What's that saying? "Buy Nice, or Buy Twice"
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 02-05-2011, 04:47 PM   #18
flamingbig10
6.0 powered square
 
flamingbig10's Avatar
 
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
Re: LMC Rubber

Quote:
Originally Posted by gnstalodz View Post
I'm looking for the cheapest weatherstripping for my doors on the 72. LMC is probably the cheapest though hu?
ebay would be
__________________
Aaron
1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot
Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326
flamingbig10 is offline   Reply With Quote
Old 10-16-2011, 07:50 AM   #19
72freak
Rottenwood Garage Member
 
72freak's Avatar
 
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
Re: LMC Rubber

Every LMC rear window or windshield gasket that has every come through my door has been TOO long. I stopped using their products long ago because of that and some other quality issues. A friend showed up the other day for us to put a new windshield in his 70 truck and when he pulled out the LMC box I shuttered. Sure enough...the gasket was too long. I guess after all the returns and complaints they have proven they are really not interested in quality control, good R&D and happy customers! The only thing their cataloge should be used for for is a reference book.
__________________
2004 Chevrolet Suburban C1500
2001 Chevrolet 2500HD Crew 6.0
1999 Harley Davidson Electra Glide
1972 Chevrolet C-20 Custom Camper "Dump Truck"
1972 Chevrolet C-20 Suburban "Big Green"
1969 Chevrolet C-50 Wedge Hauler "Leonidis"
1966 C-10 2x4 short fleet 327 4 speed "Race Truck"
1952 Plymouth Cranbrook "Rican" (my grandfathers)
1931 Ford Model A Coupe "Black Beauty"
1930 Ford Model A truck "Club Cab" 4x4


Rottenwood Garage and Speed Shop.....where everything must be racy!

It's not just a hobby..It's a LIFESTYLE!!!

Thanks for nothing Barrett-Jackson

You cant fix stupid or teach accountability!


Time wasters, looky Lous and tire kickers are everywhere!
72freak is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com