leaking oil pressure guage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

miket · 03-14-2003, 12:35 PM

Last weekend I removed my instrument panel to install a tach and after reassembling everything my oil pressure gauge leaks aroung the fitting nut and the feed line. I tried tightening it but it doesn't make any difference. Is there a fitting that goes inside the back of the guage that may have come out? Anyone have the same trouble? Any ideas?

sneakysnake · 03-14-2003, 01:12 PM

If the line is leaking and you have slack cut the old farrel off and put you a new one on, they sometimes wont seat back right

Earl Junior · 03-17-2003, 03:19 PM

Don't forget to use a bit of plumbers tape on the threads. Fixed my leak right away.

krazy_texan · 03-17-2003, 07:14 PM

you probably dropped the farrel you have to be very carful with them as they are so small

miket · 03-17-2003, 10:40 PM

Thanks guys for the replies...I figured it out..the ferrel had broke....went to NAPA spent 75 cents and that fixed it.

03-14-2003, 12:35 PM	#1
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	leaking oil pressure guage Last weekend I removed my instrument panel to install a tach and after reassembling everything my oil pressure gauge leaks aroung the fitting nut and the feed line. I tried tightening it but it doesn't make any difference. Is there a fitting that goes inside the back of the guage that may have come out? Anyone have the same trouble? Any ideas? __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

03-17-2003, 03:19 PM	#3
Earl Junior Cadillac power Join Date: Oct 2002 Location: North Idaho Posts: 296	Don't forget to use a bit of plumbers tape on the threads. Fixed my leak right away. __________________ Just for the record, if I'm down to my last potato, I'm not sharing it with a guy who wants to kill me so he can get a better supply of virgins in paradise. That lesson is a little thing I call Economics 101, infidel style. --Scott Adams author of Dilbert

03-17-2003, 07:14 PM	#4
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	you probably dropped the farrel you have to be very carful with them as they are so small __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

03-17-2003, 10:40 PM	#5
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Thanks guys for the replies...I figured it out..the ferrel had broke....went to NAPA spent 75 cents and that fixed it. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-14-2003, 01:12 PM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	If the line is leaking and you have slack cut the old farrel off and put you a new one on, they sometimes wont seat back right



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.