Original 3rd row seat pic

[71meangreenc10]

Can anyone take a few pics of how the 3rd seat is mounted correctly, need to see the front and rear mounts so I can get an idea for putting mine in.

Thanks

Smitty

[gcburdic]

Smitty....how's that burb coming along?!?!?...got it back yet?

[71meangreenc10]

So far so good....Its back at the house, need to start gettting the interior mocked up.


Smitty

[71meangreenc10]

Bueller,,,,,,,Bueller??????

There has got to be someone who can meet this request.....

Smitty

[vectorit]

I can take pics of the mounting brackets, but my 3rd bench isn't bolted in since I take it out a lot to make room.

[71meangreenc10]

Thanks Vectorit,

I have all the mounting stuff, just trying to see the proper mounting of it in the burb, mine has the 3rd row on the SPID, but it doesnt look like one was ever there. I have a seat now, just making sure its right, had to reassemble it and its not mounting up with anything that looks like a mounting hole.

Smitty

[vectorit]

It came with a 3rd row?
If it did, then there should be holes in the wood for the bolts.
You should be able to line of the back brackets to the existing holes, then the fronts will line up to where you place the hold downs.

[71meangreenc10]

SPID says so,

The holes are filled in with plugs. Also want to make sure i have the rear brackets bolted to the seat correctly.

Smitty

[71meangreenc10]

TTT...
I wont let this one die.......Need pics please......

Smitty

[Big Port Jimmy 6]

I do not have any pics. My 72,that I no longer have, had either plastic or metal plugs in the floor in the seat holes. I do not know if it had the third seat originally. I bought a Blazer rear seat and clamps. It mounted just like the second seat. Seems like some of the holes are blind, and maybe the belt holes aren't. It has been at least 6 years since I put it in though. Hope this was helpful. Jay

[72MARIO]

I have a 68 I can get pics of if that will work. think it's diffirent from the 72's

[71meangreenc10]

That would be great,

thanks 72Mario,

Smitty

[buster/gsglbc]

I'm in the same boat...need some pics. If someone with a 3 seater burb is near Long Beach, drive it over and you can drink my beer while I check it out. If this happens, I will post pics!

[magicoolbus]

Ok, I've been meaning to post these for you, but plumb forgot. Here's how mine is attached. I am missing one of the U type brackets, but you should get the idea.

[vectorit]

Originally Posted by magicoolbus

Ok, I've been meaning to post these for you, but plumb forgot. Here's how mine is attached. I am missing one of the U type brackets, but you should get the idea.

Can you snap a pic of the support under the floor that the seat belts and rear brackets bolt to? I just need a snap shot taken from the inside rear fender well, showing the types of support bars between the wood and the frame.

[magicoolbus]

Here you go. Let me know if these are what you're looking for. First one is from left wheel well, second right well and third is again right wheel well and of the front hold down bracket attatch nut.