Wheel Options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ratty65 · 02-15-2011, 01:29 AM

So I may be picking up an 1987 SRW Crew Cab this weekend. My question is what wheel options are there since this is a 2 wheel drive 8 lug and I will not be lifting and more than likely be dropping it a bit soon after? Also the engine in there is a 350 doe sthis make it a 3/4 ton or a 1 ton? I know some people do axle swaps but since this will be my DD and will also be used on occasions to tow my 1965 C10 and my wifes 66 Comet I dont plan on laying frame just want a better stance. Any ideas, websites or recommendations would be appreciated.

I really like the 19-24" wheels used on the duallys but I cant convince the wife to let me spend the extra money for the dually so for this will have to do.

Almost forgot , what options do I have to drop the truck being that it may be a 3/4 ton or 1 ton? Is it the same as the 1/2 tons and if so same companies bell tech and such? Any info on this would be appreciated as well.

Oh yeah since this will see Chicago snow and salt it is also another reason why I will not go to low anytime soon.

ratty65 · 02-15-2011, 03:55 PM

???

Leedogg · 02-15-2011, 08:36 PM

sounds like you can used any 8 lug wheel.

C25 Farm Truck · 02-15-2011, 11:15 PM

There are lots of options for 8 lug wheels. Have a look here to see lots of options:
http://67-72chevytrucks.com/vboard/s...d.php?t=345243

Then have fun shopping. Hope you get the truck!

02-15-2011, 01:29 AM	#1
ratty65 Registered User Join Date: May 2010 Location: Mundelein Posts: 99	Wheel Options So I may be picking up an 1987 SRW Crew Cab this weekend. My question is what wheel options are there since this is a 2 wheel drive 8 lug and I will not be lifting and more than likely be dropping it a bit soon after? Also the engine in there is a 350 doe sthis make it a 3/4 ton or a 1 ton? I know some people do axle swaps but since this will be my DD and will also be used on occasions to tow my 1965 C10 and my wifes 66 Comet I dont plan on laying frame just want a better stance. Any ideas, websites or recommendations would be appreciated. I really like the 19-24" wheels used on the duallys but I cant convince the wife to let me spend the extra money for the dually so for this will have to do. Almost forgot , what options do I have to drop the truck being that it may be a 3/4 ton or 1 ton? Is it the same as the 1/2 tons and if so same companies bell tech and such? Any info on this would be appreciated as well. Oh yeah since this will see Chicago snow and salt it is also another reason why I will not go to low anytime soon. Last edited by ratty65; 02-15-2011 at 01:40 AM.

02-15-2011, 03:55 PM	#2
ratty65 Registered User Join Date: May 2010 Location: Mundelein Posts: 99	Re: Wheel Options ???

02-15-2011, 08:36 PM	#3
Leedogg Registered User Join Date: Jan 2010 Location: Brewton AL Posts: 236	Re: Wheel Options sounds like you can used any 8 lug wheel. __________________ 1989 Chevy Crew Cab Dually - 454/400, Trans Am Hauler, Future bagged project. 96 Trans Am: 383/m6 - 11.98@115 on 315 M/T D/R's - 408rwhp 394 rwtq 05 VW Passat TDI - 38mpg @75mph 07 Bandit 1250S - Two wheeled fun! Click here to see my FQuick Garage!

02-15-2011, 11:15 PM	#4
C25 Farm Truck Registered User Join Date: Sep 2010 Location: Maydelle, TX Posts: 19	Re: Wheel Options There are lots of options for 8 lug wheels. Have a look here to see lots of options: http://67-72chevytrucks.com/vboard/s...d.php?t=345243 Then have fun shopping. Hope you get the truck! __________________ 1985 C2500 3+3 Sierra Classic 454/TH400 Stock right down to the wheels, it's primary purpose is to haul cows. It's secondary purpose is to provide me with many hours of fun and frustration.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.