New window channels installation?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PAPA KENT · 02-20-2011, 05:38 PM

I have a few questions on installlation of window channels on my 62.i removed the metal frame in the channel (thinking that they were part of the new assembly(before i ordered the replacement channels) and i have most of the retaining clips and the metal frame to put it back in but my questions are i had removed a long reatining frame and a shorter frame now where does each one go?

And my next question is do i just set the new window channel into the frame or do i glue it in?

And last of all do i simply glue the window channel into the back of the wing window frame or does the metal frame go into that slot also.

I have the truck across town so i am trying to save a trip on question #3.
I removed all of this several months and i don't remember what goes where.
Thanks!

C-10cutty · 04-21-2011, 08:25 AM

TTT!!!

Any and all input appreciated.

ljackson · 04-23-2011, 04:05 PM

This is on a 4-5-6. Maybe it will help on a 62.
http://67-72chevytrucks.com/vboard/s...d.php?t=351471

1Bad62Pro/Street · 04-23-2011, 05:24 PM

YouTube - HOW TO REPLACE DOOR GLASS &...

*lakeroadster* · 04-23-2011, 06:12 PM

Very interesting. Thanks for posting up the video!

1Bad62Pro/Street · 04-23-2011, 06:19 PM

No Problem.
I just wish you can buy the whole 1960-1963 Chevy/GMC Truck Right/Left Vent Window Assembly. We are the runts of the litter.

http://www.bobschevytrucks.com/vent-window-glass/

**tazattitude** · 04-23-2011, 07:29 PM

Good timing to have the neighbor cutting the grass at the same time...lol
Thanks for posting the video

As far as the door latches mechanism, is that the correct way the latch rod should look? If so, I have mine reverse. I have it installed so the rod is more horizontal and not diagonal

jonzcustomshop · 04-23-2011, 09:46 PM

6456 door latch parts are different than 60-63, so you probably have yours right..

63sbssbbw · 04-24-2011, 07:49 AM

60-63 uses the same part for both doors
Not sure about the rod though,one side may be a tad longer to accomodate the diagonal positioning.
T
Cool vid

02-20-2011, 05:38 PM	#1
PAPA KENT Registered User Join Date: Nov 2010 Location: Lolo montana Posts: 361	New window channels installation?? I have a few questions on installlation of window channels on my 62.i removed the metal frame in the channel (thinking that they were part of the new assembly(before i ordered the replacement channels) and i have most of the retaining clips and the metal frame to put it back in but my questions are i had removed a long reatining frame and a shorter frame now where does each one go? And my next question is do i just set the new window channel into the frame or do i glue it in? And last of all do i simply glue the window channel into the back of the wing window frame or does the metal frame go into that slot also. I have the truck across town so i am trying to save a trip on question #3. I removed all of this several months and i don't remember what goes where. Thanks!

04-21-2011, 08:25 AM	#2
C-10cutty Registered User Join Date: May 2010 Location: Galesburg, Kansas Posts: 174	Re: New window channels installation?? TTT!!! Any and all input appreciated.

04-23-2011, 06:12 PM	#5
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: New window channels installation?? Very interesting. Thanks for posting up the video!

04-23-2011, 06:19 PM	#6
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: New window channels installation?? No Problem. I just wish you can buy the whole 1960-1963 Chevy/GMC Truck Right/Left Vent Window Assembly. We are the runts of the litter. http://www.bobschevytrucks.com/vent-window-glass/ __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

04-23-2011, 07:29 PM	#7
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: New window channels installation?? Good timing to have the neighbor cutting the grass at the same time...lol Thanks for posting the video As far as the door latches mechanism, is that the correct way the latch rod should look? If so, I have mine reverse. I have it installed so the rod is more horizontal and not diagonal __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

04-23-2011, 04:05 PM	#3
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: New window channels installation?? This is on a 4-5-6. Maybe it will help on a 62. http://67-72chevytrucks.com/vboard/s...d.php?t=351471 __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.

04-23-2011, 09:46 PM	#8
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: New window channels installation?? 6456 door latch parts are different than 60-63, so you probably have yours right.. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

04-24-2011, 07:49 AM	#9
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: New window channels installation?? 60-63 uses the same part for both doors Not sure about the rod though,one side may be a tad longer to accomodate the diagonal positioning. T Cool vid __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) Last edited by 63sbssbbw; 04-24-2011 at 08:17 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.