|
02-21-2011, 07:27 PM | #1 |
Spanked once
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
|
Wood bed measurement
I' m going to tub my 71 by adding to the stock wheel wells and need to get past the third bed strip about an inch.
My bed is in pieces and I have no way to measure.
__________________
The ole 350 budget build. |
02-21-2011, 08:22 PM | #2 |
Retired Air Force Veteran
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Wood bed measurement
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
02-21-2011, 09:43 PM | #3 |
Spanked once
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
|
Re: Wood bed measurement
I should have said the second strip and the sketch is nice but it doesn't give stock measurement from the tub to that strip. Four inches would do me but I need to make sure I'm past that strip to miss the curve in the tub flange.
__________________
The ole 350 budget build. Last edited by Richard H.; 02-22-2011 at 01:39 PM. Reason: n/m |
02-22-2011, 01:40 PM | #4 |
Spanked once
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
|
Re: Wood bed measurement
TTT, one more try.
__________________
The ole 350 budget build. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|