Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-07-2011, 12:53 PM | #1 |
Registered User
Join Date: May 2010
Location: Redding, Ca
Posts: 371
|
Need Help With Hood adjustment
I've searched and read several threads regarding the adjustment of our hoods but they did not address my problem. The back of my hood at the cowling is off line towards the passenger side about 1/2" causing a huge gap on the drivers side. The front of the hood is fine. I don't seem to have any play in the hood holes to move left or right just front to back. I need to split the difference to be close to 1/4" in the bask. I guess I could remove hood and make the holes elongated but I'm hoping there is an easier fix that I'm missing. Thanks
|
03-07-2011, 01:31 PM | #2 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
Re: Need Help With Hood adjustment
Make sure there's no play in the hood hinge pivot points
Posted via Mobile Device
__________________
1967custom |
03-07-2011, 01:58 PM | #3 | |
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 1,423
|
Re: Need Help With Hood adjustment
Quote:
__________________
69 Chevy 4x4 383 Power |
|
03-07-2011, 02:11 PM | #4 |
Registered User
Join Date: May 2010
Location: Redding, Ca
Posts: 371
|
Re: Need Help With Hood adjustment
So if I put some body shims between the fender and the hinge on the passenger side it will move the fender towards the drivers side. Cool that's what I will try. Thanks
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|