Newbie - Upper Radiator Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daddybooz · 03-15-2011, 08:51 PM

Hi guys,

Another rookie error on my part! When I got my truck the PO had the shroud and radiator tied to the frame with wire, I didnt like that. So I searched around and found replacement upper mounts, thought to myself, "self" this isnt so hard, right!

Well I ordered 3 row uppers from Southern Kentucky

and the rubber insert was too small. Did some more research and when I measured the core it was the size of a 4 row. Sent back the 3 row and Southern Kentucky send me the 4 row

. Now the 4 row is huge and swallows my radiator

!!!

If I remember correctly, my core measures 2 3/4". I dont know where to go, any ideas??

Thanks for you help, I need it!!

ETsC10 · 03-15-2011, 10:37 PM

Don't know the answer but here's a ttt

Good luck!

daddybooz · 03-16-2011, 07:54 PM

Thanks for the ttt ETsC10!

Anyone have a pic of stock that you could show me??

Thanks!

**Tmend** · 03-16-2011, 08:04 PM

what did you want a pic of

Zoomin · 03-16-2011, 10:09 PM

Sounds like your radiator isn't stock.

Welcome, BTW.

daddybooz · 03-17-2011, 01:40 PM

I'll get some pics of what I have, for a radiator and post. It might not be the original one.

Thanks for your helps guys!

**VetteVet** · 03-17-2011, 03:24 PM

Here's a pic of the brackets installed. It seems to be a 3 core. They go over the ridge on the tank where it meets the core.

Name: 2007_0918Truck0028.jpg
Views: 89
Size: 62.5 KB

Name: 2007_0918Truck0028.jpg
Views: 89
Size: 62.5 KB

03-15-2011, 08:51 PM	#1
daddybooz Registered User Join Date: Feb 2010 Location: Fort Atkinson, WI Posts: 39	Newbie - Upper Radiator Bracket Hi guys, Another rookie error on my part! When I got my truck the PO had the shroud and radiator tied to the frame with wire, I didnt like that. So I searched around and found replacement upper mounts, thought to myself, "self" this isnt so hard, right! Well I ordered 3 row uppers from Southern Kentucky and the rubber insert was too small. Did some more research and when I measured the core it was the size of a 4 row. Sent back the 3 row and Southern Kentucky send me the 4 row . Now the 4 row is huge and swallows my radiator !!! If I remember correctly, my core measures 2 3/4". I dont know where to go, any ideas?? Thanks for you help, I need it!! __________________ DaddyBooz '68 C10 LWB KCP 406; 400 small block, 30 over, alum heads built by Kurt Clapper Ceramic center dumps, custom 2 1/2" SS all the way back w/MagnaFlows 2"/4" drop on 15's

03-15-2011, 10:37 PM	#2
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Newbie - Upper Radiator Bracket Don't know the answer but here's a ttt Good luck!

03-16-2011, 07:54 PM	#3
daddybooz Registered User Join Date: Feb 2010 Location: Fort Atkinson, WI Posts: 39	Re: Newbie - Upper Radiator Bracket Thanks for the ttt ETsC10! Anyone have a pic of stock that you could show me?? Thanks! __________________ DaddyBooz '68 C10 LWB KCP 406; 400 small block, 30 over, alum heads built by Kurt Clapper Ceramic center dumps, custom 2 1/2" SS all the way back w/MagnaFlows 2"/4" drop on 15's

03-16-2011, 08:04 PM	#4
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,271	Re: Newbie - Upper Radiator Bracket what did you want a pic of

03-16-2011, 10:09 PM	#5
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Newbie - Upper Radiator Bracket Sounds like your radiator isn't stock. Welcome, BTW. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-17-2011, 01:40 PM	#6
daddybooz Registered User Join Date: Feb 2010 Location: Fort Atkinson, WI Posts: 39	Re: Newbie - Upper Radiator Bracket I'll get some pics of what I have, for a radiator and post. It might not be the original one. Thanks for your helps guys! __________________ DaddyBooz '68 C10 LWB KCP 406; 400 small block, 30 over, alum heads built by Kurt Clapper Ceramic center dumps, custom 2 1/2" SS all the way back w/MagnaFlows 2"/4" drop on 15's

03-17-2011, 03:24 PM	#7
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,713	Re: Newbie - Upper Radiator Bracket Here's a pic of the brackets installed. It seems to be a 3 core. They go over the ridge on the tank where it meets the core. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.