TX 1963 SWB frame/rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lilred67 · 03-23-2011, 07:16 AM

i have a straight, complete, short wheel base GMC frame / rolling chassis in good condition. coil springs in front / leaf springs in the rear. $200.00 O.B.O. CASH / bank money order.. please respond to this thread. thanks, Rusty

lilred67 · 04-09-2011, 10:36 AM

offers?

lilred67 · 04-17-2011, 01:09 PM

pics added, motor available together or seperate. see my other thread.

100%Chevy · 04-17-2011, 09:04 PM

I need a set of front engine mounts for my V/6.The steel part bolted to the engine and the rubber mounts.Mine was originally a front/center mount.I want to go to the side mounts.The engines going in a 64.
And a question-Are the towers the same as the v/8 or the I/6 towers?Don't know which I need to use with the v/6.May need yours.
I would like a price and shipping to 39562 on the 2 steel engine parts and rubber mounts.
Thanks,Mike.

lilred67 · 04-17-2011, 10:21 PM

hi Mike, i'll take $50.00.plus shipping,it is around $30. stands,rubbers,engine brackets. the piece that bolts to the engine is large.

i haven't paid that much attention to these stands, if they are the same as the i-6 / v-8 stands on this year truck. they look different on the '68 i have with the v-6.. thanks Rusty

100%Chevy · 04-17-2011, 10:40 PM

Thanks Rusty.
I'll get back to you in a week or so.
Got to make my mind up on some other stuff I'm buying.
Didn't expect to see these come up for sale.
Mike.

lilred67 · 04-17-2011, 11:08 PM

Quote:

Originally Posted by 100%Chevy

Thanks Rusty.
I'll get back to you in a week or so.
Got to make my mind up on some other stuff I'm buying.
Didn't expect to see these come up for sale.
Mike.

i re-read your post!! i priced it with stands, you wanted it without. cheaper price / shipping without stands, let me know.....Rusty.

100%Chevy · 04-20-2011, 01:34 PM

Rusty,I'd like to buy the parts.
What you originally quoted me for the 6 pieces.The 2 steel parts that bolt to the engine,the 2 rubber mounts and the 2 stands or towers.Total$50.00 +$30.00 shipping.
I've determined I do need the 305 stands!
Also,what will you take for the engine fan?
I can send a postal money order when we work out the deal.
I need your info by p.m. or e-mail.
Thanks,Mike.

lilred67 · 04-20-2011, 08:39 PM

PM sent to 100%chevy

100%Chevy · 04-20-2011, 09:21 PM

Got it!
Mike.

100%Chevy · 04-21-2011, 07:14 PM

Rusty,I put the check in the mail about 9:00 this morning.
Mike.

lilred67 · 04-21-2011, 10:23 PM

Quote:

Originally Posted by 100%Chevy

Rusty,I put the check in the mail about 9:00 this morning.
Mike.

thanks..

100%Chevy · 04-29-2011, 10:52 PM

Rusty,I got the parts I bought from you today.
Everything was exactly as described and fit perfectly!
Also,thanks for sending the parts I forgot to ask for but you knew I needed.
To everyone else,I've bought from Rusty before and won't hesitate to do it again.I feel I always get the better part of the deal!
Again,thank you Rusty!
Mike.

lilred67 · 06-11-2011, 03:20 PM

ttt

lilred67 · 07-04-2011, 08:27 AM

ttt

CVA59 · 07-05-2011, 10:25 AM

I'll take the rolling frame.
Posted via Mobile Device

lilred67 · 07-05-2011, 06:26 PM

Quote:

Originally Posted by CVA59

I'll take the rolling frame.
Posted via Mobile Device

frame sold to CVA59 pending payment.....thanks

lilred67 · 07-08-2011, 11:25 PM

Quote:

Originally Posted by lilred67

frame sold to CVA59 pending payment.....thanks

payment recieved...thanks

03-23-2011, 07:16 AM	#1
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	1963 SWB frame/rolling chassis i have a straight, complete, short wheel base GMC frame / rolling chassis in good condition. coil springs in front / leaf springs in the rear. $200.00 O.B.O. CASH / bank money order.. please respond to this thread. thanks, Rusty Last edited by lilred67; 07-04-2011 at 08:27 AM. Reason: new price

04-09-2011, 10:36 AM	#2
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis offers?

04-17-2011, 01:09 PM	#3
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis pics added, motor available together or seperate. see my other thread. Attached Images

04-17-2011, 09:04 PM	#4
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis I need a set of front engine mounts for my V/6.The steel part bolted to the engine and the rubber mounts.Mine was originally a front/center mount.I want to go to the side mounts.The engines going in a 64. And a question-Are the towers the same as the v/8 or the I/6 towers?Don't know which I need to use with the v/6.May need yours. I would like a price and shipping to 39562 on the 2 steel engine parts and rubber mounts. Thanks,Mike.

04-17-2011, 10:21 PM	#5
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis hi Mike, i'll take $50.00.plus shipping,it is around $30. stands,rubbers,engine brackets. the piece that bolts to the engine is large. i haven't paid that much attention to these stands, if they are the same as the i-6 / v-8 stands on this year truck. they look different on the '68 i have with the v-6.. thanks Rusty

04-17-2011, 10:40 PM	#6
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Thanks Rusty. I'll get back to you in a week or so. Got to make my mind up on some other stuff I'm buying. Didn't expect to see these come up for sale. Mike.

04-20-2011, 01:34 PM	#8
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I'd like to buy the parts. What you originally quoted me for the 6 pieces.The 2 steel parts that bolt to the engine,the 2 rubber mounts and the 2 stands or towers.Total$50.00 +$30.00 shipping. I've determined I do need the 305 stands! Also,what will you take for the engine fan? I can send a postal money order when we work out the deal. I need your info by p.m. or e-mail. Thanks,Mike.

04-20-2011, 08:39 PM	#9
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis PM sent to 100%chevy

04-20-2011, 09:21 PM	#10
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Got it! Mike.

04-21-2011, 07:14 PM	#11
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I put the check in the mail about 9:00 this morning. Mike.

04-29-2011, 10:52 PM	#13
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I got the parts I bought from you today. Everything was exactly as described and fit perfectly! Also,thanks for sending the parts I forgot to ask for but you knew I needed. To everyone else,I've bought from Rusty before and won't hesitate to do it again.I feel I always get the better part of the deal! Again,thank you Rusty! Mike.

06-11-2011, 03:20 PM	#14
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis ttt

07-04-2011, 08:27 AM	#15
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis ttt

07-05-2011, 10:25 AM	#16
CVA59 Registered User Join Date: Nov 2009 Location: Longview, Texas Posts: 775	Re: 1963 SWB frame/rolling chassis I'll take the rolling frame. Posted via Mobile Device __________________ Zack www.23t.weebly.com _________________________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.