|
03-22-2003, 12:15 AM | #1 |
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Shift Indicator
How is the shift indicator lit on a tilt column. Does it use the same fiber optic setup that is on the non tilt column. Mine doesn't look like there is any way for it to be lit.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
03-22-2003, 12:46 AM | #2 |
Registered User
Join Date: Oct 2002
Location: Livermore, CA
Posts: 566
|
There is a bulb under the PRNDLL. Just take the 2 screws out that hold it on the column and you'll find it underneath.
__________________
350 ETec 170 heads, Performer, HEI, Holly TBI, 700r4, 14 bolt rear, F&R lockers, lots of off road improvements. |
03-22-2003, 02:51 AM | #3 |
Registered User
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
|
The shift indicator is supposed to be light up? I would be happy if it just pointed right. Anyone know how to adjust it?
__________________
'72 GMC custom camper 350/350 |
03-22-2003, 07:20 AM | #4 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Does your detent lock in when you put the shifter into park?
The only adjustable part of the column that you have is the linkage outside the fire wall. Jim |
03-24-2003, 10:02 PM | #5 |
Registered User
Join Date: Sep 2001
Location: Hacienda Heights, California USA
Posts: 474
|
Jim, it does lock in. I just replaced the stock linkage with a Kugel linkage setup. But the pointer is still off. When its in Park, it pointing way past the P.
__________________
'72 GMC custom camper 350/350 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|