GA Parting out 76 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BustedTruck · 03-29-2011, 10:22 PM

I am parting this 1976 Suburban. If you see anything you want let me know. Engine & trans is sold already. The body is rusty. This thing is headed to the crusher soon.

**ScottH** · 03-29-2011, 10:54 PM

what kind of shape and how much for the dashpad, grill & headlight bezels?

hayesperformanceplus · 03-30-2011, 01:34 AM

What are the front door panels like? Can I see some pics?

Thank you!

David

bossrod · 03-30-2011, 08:29 AM

What's the cost for the complete steering wheel (back to the turn signal cancellation cam?
Can you rate the condition? Would be shipped to 06340.

Thanks
Jim

BustedTruck · 03-30-2011, 09:21 AM

The headlamp bezels are pitted. I remember the grill was in pretty good shape though. I will check the dash pad & get back with you.

I'll get some pics of the door panels.

Let me check the condition of the steering wheel.

hayesperformanceplus · 03-30-2011, 10:03 AM

I forgot, are the rear outer bumper brackets ok? Or How rusted are they (lol)?

Thank you...

David

BustedTruck · 03-30-2011, 05:54 PM

OK The dash pad has cracks around the speaker area. Here are the pics of the door panels. If you want them $10 plus shipping.

Grill & bezels $25 plus shipping. The headlamp bezels are not in great shape.

I would rate the steering wheel a 5. $20 plus shipping.

**ScottH** · 03-30-2011, 07:14 PM

Can u post pics of dash pad cracks? Also how much shipped to 08753?

Thanks

*87 chevy silverado* · 03-30-2011, 09:38 PM

jw wat would you want for the hole front clip ? even bumper and gurds

Dusty4x4 · 03-30-2011, 09:57 PM

How much for the heater controls?

BustedTruck · 03-31-2011, 04:57 PM

Rear bumper brackets have some surface rust. Rh may be bent just a little. $10 plus shipping.

If you want the dash pad $10 plus shipping. The box will be pretty big but light. Hard to estimate shipping until I get it boxed up

I'll take $100 obo for the whole clip.
Posted via Mobile Device

Heater controls are heat only$10plus ride

I'll have pics later
Posted via Mobile Device

Dusty4x4 · 03-31-2011, 10:30 PM

OK i will take the heater controls PM sent...

Quote:

Originally Posted by BustedTruck

Rear bumper brackets have some surface rust. Rh may be bent just a little. $10 plus shipping.

If you want the dash pad $10 plus shipping. The box will be pretty big but light. Hard to estimate shipping until I get it boxed up

I'll take $100 obo for the whole clip.
Posted via Mobile Device

Heater controls are heat only$10plus ride

I'll have pics later
Posted via Mobile Device

**DA68** · 04-03-2011, 11:05 PM

Power steering? If so, how much for the steering box, hoses and shipping?

Panelman55 · 04-03-2011, 11:38 PM

What shape is rear bumper in if its not sold?

Panelman55

*79 silverado* · 04-04-2011, 10:21 PM

had you ever had the trunk running/driving in the past? If so which meant an opportunity to see em working, did the radio work (and how much $$$?) and did the gauges work (and how much $$$?)

*87 chevy silverado* · 03-31-2011, 05:15 PM

how long do u plane to keep it around?

BustedTruck · 03-31-2011, 06:25 PM

I plan on getting rid of it next weekend, but if you want the front clip I can remove it & store if for a little longer.

*87 chevy silverado* · 03-31-2011, 06:37 PM

if you dont mind couse im realy interested i dont need the hood thats the only thing i dont care for from the front end. and the chrome on the fenders and front doors i would like also..and the wiring harness for the front end to

**ScottH** · 03-31-2011, 10:27 PM

thanks for posting pics of the dashpad, doesnt look like its worth shipping it.

BustedTruck · 04-05-2011, 11:11 AM

The truck had power steering. Hoses have been cut. Not 100% sure on the wieght of the box so not sure on the shipping yet.

Rear Bumper is no good.

I did have it running, but can't remember if all the gauges worked. It has a sony cassette player that wasn't hooked up & the original radio in the back, no idea if the radios work. $10 for the radios $15 for the gauges + shipping.

68chevyfuelie · 04-05-2011, 07:12 PM

Would you pull the RH window regulator? How much for regulator, any hardware you pulled, and crank knobs? It is the '74-77 style, correct? Thanks.

BustedTruck · 04-07-2011, 04:10 PM

I have to go over tonight & I'll check on the regulator.

BustedTruck · 04-07-2011, 09:48 PM

I pulled the regualtor out & it looks pretty good. I'll take $10 plus the ride. Let me know cause this thing is going to the crusher Saturday.

K30_dump · 04-07-2011, 11:17 PM

Hello,

Fuel tank crossmembers (shipped to 17740)? I imagine they'd be a pain for you to cut out, but figured I'd check

. Don't really care if you cut the frame, I'll grind the rivets...

Let me know, thanks

Joe
Posted via Mobile Device

68chevyfuelie · 04-07-2011, 11:29 PM

$10 plus the ride sounds great. It IS the short style, '74-77, correct? I can measure some regulators I have tomorrow if you need a reference measurement. Thanks.

03-29-2011, 10:22 PM	#1
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Parting out 76 Suburban I am parting this 1976 Suburban. If you see anything you want let me know. Engine & trans is sold already. The body is rusty. This thing is headed to the crusher soon. Attached Images

03-29-2011, 10:54 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting out 76 Suburban what kind of shape and how much for the dashpad, grill & headlight bezels? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 03-29-2011 at 10:55 PM.

03-30-2011, 01:34 AM	#3
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: Parting out 76 Suburban What are the front door panels like? Can I see some pics? Thank you! David __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

03-30-2011, 08:29 AM	#4
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: Parting out 76 Suburban What's the cost for the complete steering wheel (back to the turn signal cancellation cam? Can you rate the condition? Would be shipped to 06340. Thanks Jim

03-30-2011, 09:21 AM	#5
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban The headlamp bezels are pitted. I remember the grill was in pretty good shape though. I will check the dash pad & get back with you. I'll get some pics of the door panels. Let me check the condition of the steering wheel.

03-30-2011, 10:03 AM	#6
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: Parting out 76 Suburban I forgot, are the rear outer bumper brackets ok? Or How rusted are they (lol)? Thank you... David __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

03-30-2011, 05:54 PM	#7
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban OK The dash pad has cracks around the speaker area. Here are the pics of the door panels. If you want them $10 plus shipping. Grill & bezels $25 plus shipping. The headlamp bezels are not in great shape. I would rate the steering wheel a 5. $20 plus shipping. Attached Images

03-30-2011, 07:14 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting out 76 Suburban Can u post pics of dash pad cracks? Also how much shipped to 08753? Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-30-2011, 09:38 PM	#9
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Parting out 76 Suburban jw wat would you want for the hole front clip ? even bumper and gurds

03-30-2011, 09:57 PM	#10
Dusty4x4 Registered User Join Date: Mar 2009 Location: Brevard,N.C Posts: 173	Re: Parting out 76 Suburban How much for the heater controls? __________________ 1980 1/2 ton shortbed project 1978 grand prix project Never stop trying...

03-31-2011, 04:57 PM	#11
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban Rear bumper brackets have some surface rust. Rh may be bent just a little. $10 plus shipping. If you want the dash pad $10 plus shipping. The box will be pretty big but light. Hard to estimate shipping until I get it boxed up I'll take $100 obo for the whole clip. Posted via Mobile Device Heater controls are heat only$10plus ride I'll have pics later Posted via Mobile Device

04-03-2011, 11:05 PM	#13
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Parting out 76 Suburban Power steering? If so, how much for the steering box, hoses and shipping?

04-03-2011, 11:38 PM	#14
Panelman55 Registered User Join Date: Dec 2009 Location: Winston, Ga. Posts: 240	Re: Parting out 76 Suburban What shape is rear bumper in if its not sold? Panelman55 __________________ In God We trust!!!

04-04-2011, 10:21 PM	#15
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	Re: Parting out 76 Suburban had you ever had the trunk running/driving in the past? If so which meant an opportunity to see em working, did the radio work (and how much $$$?) and did the gauges work (and how much $$$?)

03-31-2011, 05:15 PM	#16
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Parting out 76 Suburban how long do u plane to keep it around?



Register or Log In To remove these advertisements.

03-31-2011, 06:25 PM	#17
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban I plan on getting rid of it next weekend, but if you want the front clip I can remove it & store if for a little longer. Attached Images

03-31-2011, 06:37 PM	#18
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Parting out 76 Suburban if you dont mind couse im realy interested i dont need the hood thats the only thing i dont care for from the front end. and the chrome on the fenders and front doors i would like also..and the wiring harness for the front end to Last edited by 87 chevy silverado; 03-31-2011 at 06:48 PM.

03-31-2011, 10:27 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting out 76 Suburban thanks for posting pics of the dashpad, doesnt look like its worth shipping it. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-05-2011, 11:11 AM	#20
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban The truck had power steering. Hoses have been cut. Not 100% sure on the wieght of the box so not sure on the shipping yet. Rear Bumper is no good. I did have it running, but can't remember if all the gauges worked. It has a sony cassette player that wasn't hooked up & the original radio in the back, no idea if the radios work. $10 for the radios $15 for the gauges + shipping.

04-05-2011, 07:12 PM	#21
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Parting out 76 Suburban Would you pull the RH window regulator? How much for regulator, any hardware you pulled, and crank knobs? It is the '74-77 style, correct? Thanks.

04-07-2011, 04:10 PM	#22
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban I have to go over tonight & I'll check on the regulator.

04-07-2011, 09:48 PM	#23
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: Parting out 76 Suburban I pulled the regualtor out & it looks pretty good. I'll take $10 plus the ride. Let me know cause this thing is going to the crusher Saturday.

04-07-2011, 11:17 PM	#24
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: Parting out 76 Suburban Hello, Fuel tank crossmembers (shipped to 17740)? I imagine they'd be a pain for you to cut out, but figured I'd check . Don't really care if you cut the frame, I'll grind the rivets... Let me know, thanks Joe Posted via Mobile Device

04-07-2011, 11:29 PM	#25
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Parting out 76 Suburban $10 plus the ride sounds great. It IS the short style, '74-77, correct? I can measure some regulators I have tomorrow if you need a reference measurement. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.