|
04-03-2011, 10:54 AM | #1 |
Registered User
Join Date: Mar 2010
Location: Prosper, TX
Posts: 17
|
Side windows
Having great difficulty getting the side window to go down. The sash keeps hanging in the track bar that is below the window opening. All my parts are new including the window glass. any thoughts or suggestions before I break out the BFH (big friggin hammer).... Thanks
|
04-03-2011, 11:09 AM | #2 | |
Registered User
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
|
Re: Side windows
Quote:
Is the window going down straight? or is it cocking a little when going down? If its crooked I would pull out the upper door frame rubber and see if it gets better. leave the division bar ok and see if it goes down ok. There is a liitle adjustment in the brackets. not much. hold the window with your hand up against the front bar and feel it. You can do more with feel than sight when doing windows. If the window is still acting funny check the actual window regulator. is the original or oem. Some aftermarket ones are not too good and don't operate good. We even had them come in with the rollers on the wrong side. DId you replace the belt line mouldings? (The sweeps) they sometimes are hard and can cause problems. You have to be patient with windows. Everyone thinks they are easy but they take time. Last edited by mbgmike; 04-03-2011 at 11:15 AM. |
|
04-03-2011, 09:45 PM | #3 |
Registered User
Join Date: Mar 2010
Location: Prosper, TX
Posts: 17
|
Re: Side windows
When the window goes up. it is wedged at the lower part of the glass and the lower glass channel. It appears that the lower channel, when the bracket is bolted to the door, is at an odd angle. the bracket came from LMC.. May have to adjust it. thanks for your responce
|
04-03-2011, 10:36 PM | #4 | |
Registered User
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
|
Re: Side windows
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|