CA 71 cab for patches

[KrazyRay]

This is an ac cab that is missing the driver side cab corner and the roof has holes from aftermarket lights. There should be some good patches remaining.
$25 and up per patch plus shipping.
Thanks,
Ray

[oldschooler]

Hey buddy,
What does the rear floor look like? Thanks Rich

[KrazyRay]

It is solid with some surface rust under the seat.

[projectjimmie68]

How are the rear corners of the floor?

[oldschooler]

Originally Posted by oldschooler

Hey buddy,
What does the rear floor look like? Thanks Rich

Would you consider shipping the back half of cab floor,(entire floor including the corners that someone else after me got a quote on) to pa.? I am very interested. Thanks, Rich

[KrazyRay]

Sorry, I lost you in between my posts. I have many cabs that I can get patches from. Part of the driver side floor is already missing on this one. I can do $100 plus greyhound shipping for the rear floor.
Thanks,
Ray

[oldschooler]

Originally Posted by KrazyRay

Sorry, I lost you in between my posts. I have many cabs that I can get patches from. Part of the driver side floor is already missing on this one. I can do $100 plus greyhound shipping for the rear floor.
Thanks,
Ray

Still got me interested. Can you get a shipping quote to York Pa., that is the closest station to me. Thanks. I will go out and get an exact measurement of what I need. Thanks, Rich I need the back 11" of the floor. If cutting with torch cut it where I can drill out spot welds across the back and sides, and keep floor support intact. Thanks, Rich

[KrazyRay]

The floor in the driver side has been sold a while back, but the passenger is solid. I can also check a 68 cab for the driver floor.

[grwnded71]

How much for the rear window channel cut out and shipped to 53105?

[VA72C10]

Interested in the passenger side cowl where the A/C blower goes all the way to the top

From below the circle, around the entire circle, and to the windshield frame

Also the lower cowl area (lower 4") on both sides

price to 23112?

[projectjimmie68]

I need the corner section from the outside to the jack hold down bracket and from the back to the wire that is pictured. Same on the other side if you have. How much plus shipping to zip 32136? Thanks Projectjimmie

[VA72C10]

I believe Gcburdic and Brn agn are looking for the lower door hinge pillar area (where the lower hinge screws to) on the passenger side....

[gcburdic]

Originally Posted by VA72C10

I believe Gcburdic and Brn agn are looking for the lower door hinge pillar area (where the lower hinge screws to) on the passenger side....

Thanks for remembering Jonathan....but we just got one from Sharpie

[KrazyRay]

grwnded71- $100 shipped. How many inches from window opening for the cut?

VA72C10- Can you draw your patches on my pics?

projectjimmie68- $80 shipped for both sides...I will get the driver side from my 68.

Jonathan- Thanks for the lead.

I plan on cutting and shipping all patches next week.
Thanks,
Ray

[VA72C10]

Here you go. both sides of the lower cowl and the area around the blower as shown.

[grwnded71]

Originally Posted by KrazyRay

grwnded71- $100 shipped. How many inches from window opening for the cut?

VA72C10- Can you draw your patches on my pics?

projectjimmie68- $80 shipped for both sides...I will get the driver side from my 68.

Jonathan- Thanks for the lead.

I plan on cutting and shipping all patches next week.
Thanks,
Ray

How does 1.5 inches from outside lip sound, will that work for you? inside and outside? appears to be in really good shape from the pics, any rust on the inside channel? I will take it, Pm me your paypal address, I will get you paid tomorrow

[KrazyRay]

Jonathan, Thanks for the ink! I can send your patches for $70 shipped.
Thanks,
Ray

[VA72C10]

sounds good...can you pm me paypal again and Ill get you paid tonight.

[KrazyRay]

pm sent

[KrazyRay]

The channel has no rust. pm sent

[grwnded71]

Originally Posted by KrazyRay

The channel has no rust. pm sent

Payment sent. rear window channel sold.

Thanks, Brett

[KrazyRay]

Rich, Its $84 with greyhound. If that works, I will measure 12" from the back wall and cut all the way across the floor and about one inch above the floor on the back wall/corners/door jambs.
Thanks,
Ray

[oldschooler]

Originally Posted by KrazyRay

Rich, Its $84 with greyhound. If that works, I will measure 12" from the back wall and cut all the way across the floor and about one inch above the floor on the back wall/corners/door jambs.
Thanks,
Ray

Hey Ray, That sounds good. Pm sent

[nightmare]

Can I get a better picture of this area?

[KrazyRay]

Jonathan- Here's some pics of your patches.

Mike- Take a look at the pics, however, I carved some of that section already

Thanks,
Ray