need advice on lowering a 1 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79GMC454C35 · 03-25-2003, 02:12 AM

who makes a good inexpensive kit to lower a 79 single wheel 1 ton about 4" front & rear? I pull a 32 foot trailer quite often so I dont want it too low but I'm tired of the 4X4 look on my 4X2. I shocks are not inclueded with these kits please give me an idea of some shocks too.
Thank you!

79GMC454C35 · 03-30-2003, 11:13 AM

low 84 · 04-02-2003, 02:55 AM

a 1 ton is a c30, right?

here you go http://www.sporttruckdirect.com/C30_kits.html

this is a good maufacturer i have usd there parts on my truck

79GMC454C35 · 04-02-2003, 11:35 PM

Thanks for your reply. I was looking at that kit but I was not sure if it was any good. did you use these shocks? are they any good? what would be a good upgrade shock? Thanks!

low 84 · 04-03-2003, 02:56 AM

well i used there shocks on my 1/2 ton, but i think you'd need something more heavy duty on your 1 ton. i'd call them up and see what they suggest or if they have some that will work on a 1 ton. but there kits are real good, there are quite a few of us that have used theri parts.

MOTHERTRUCKERS · 04-06-2003, 09:42 AM

We are a dealer for Sport Truck Direct all their spindles are WESTERN and their shocks are DOETSCHTECH the highest quality with a full lifetime warranty products you can buy anywhere. If interested e-mail me their part number and your city,state and zipcode and i'll get you a quote

79GMC454C35 · 04-06-2003, 12:58 PM

I have been to your site before but it said you dont deal with anything newer than 72'. I talked to another guy that has 72' & older parts for my truck at a show. He is in Arizona & I thought I would give him my business & I might recieve better service from a local guy. He was rude & said, I have 72 & older parts, your truck is a 79', is 79' older than 72'? Now, I can count ok & know the basic order of numbers. I also know he could get me anything I want. He was rude & now when I start building my older truck we will not get a penny from me. I thank you for your offer & I will get a list of part #'s & e-mail you for a quote. I have decided to do business with people that really want new customers.
Thank you!

MOTHERTRUCKERS · 04-06-2003, 08:14 PM

Our main business is 47-72 in our parts and restorations but lately people are calling for later Chevy & GMC parts and a lot of companies we deal with have 47-02 parts available. We have an 80 GMC step side in our shop for paint,interior and a custom wood bed right now.

low 84 · 04-09-2003, 02:37 AM

Quote:

Originally posted by MOTHERTRUCKERS
We are a dealer for Sport Truck Direct all their spindles are WESTERN and their shocks are DOECHTECH the highest quality with a full lifetime warranty products you can buy anywhere. If interested e-mail me their part number and your city,state and zipcode and i'll get you a quote

so those shocks will support a 1 ton truck? is it a differnt part number from the 1/2 ton truck shock? i sure hope so

MOTHERTRUCKERS · 04-09-2003, 06:36 AM

Yes c-10, c-20 and c-30 are different shocks.

low 84 · 04-09-2003, 11:14 PM

Quote:

Originally posted by MOTHERTRUCKERS
Yes c-10, c-20 and c-30 are different shocks.

sweet. thanks for responding

79GMC454C35 · 04-12-2003, 01:55 AM

how wierd, I work about 1/4 mile from Sport Direct & did not know they were there. Can you get me a better price than if I am just an average idiot walking in thier front door? (I consider myself an "average idiot"). Thanks

03-25-2003, 02:12 AM	#1
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	need advice on lowering a 1 ton who makes a good inexpensive kit to lower a 79 single wheel 1 ton about 4" front & rear? I pull a 32 foot trailer quite often so I dont want it too low but I'm tired of the 4X4 look on my 4X2. I shocks are not inclueded with these kits please give me an idea of some shocks too. Thank you!

03-30-2003, 11:13 AM	#2
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	No ideas or help?

04-02-2003, 02:55 AM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	a 1 ton is a c30, right? here you go http://www.sporttruckdirect.com/C30_kits.html this is a good maufacturer i have usd there parts on my truck __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-03-2003, 02:56 AM	#5
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	well i used there shocks on my 1/2 ton, but i think you'd need something more heavy duty on your 1 ton. i'd call them up and see what they suggest or if they have some that will work on a 1 ton. but there kits are real good, there are quite a few of us that have used theri parts. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-06-2003, 09:42 AM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We are a dealer for Sport Truck Direct all their spindles are WESTERN and their shocks are DOETSCHTECH the highest quality with a full lifetime warranty products you can buy anywhere. If interested e-mail me their part number and your city,state and zipcode and i'll get you a quote __________________ Rest in Peace Ed. Thanks for all the good times. Last edited by MOTHERTRUCKERS; 04-09-2003 at 06:32 AM.

04-02-2003, 11:35 PM	#4
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	Thanks for your reply. I was looking at that kit but I was not sure if it was any good. did you use these shocks? are they any good? what would be a good upgrade shock? Thanks!

04-06-2003, 12:58 PM	#7
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	Re: MOTHERTRUCKERS I have been to your site before but it said you dont deal with anything newer than 72'. I talked to another guy that has 72' & older parts for my truck at a show. He is in Arizona & I thought I would give him my business & I might recieve better service from a local guy. He was rude & said, I have 72 & older parts, your truck is a 79', is 79' older than 72'? Now, I can count ok & know the basic order of numbers. I also know he could get me anything I want. He was rude & now when I start building my older truck we will not get a penny from me. I thank you for your offer & I will get a list of part #'s & e-mail you for a quote. I have decided to do business with people that really want new customers. Thank you!

04-06-2003, 08:14 PM	#8
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Our main business is 47-72 in our parts and restorations but lately people are calling for later Chevy & GMC parts and a lot of companies we deal with have 47-02 parts available. We have an 80 GMC step side in our shop for paint,interior and a custom wood bed right now. __________________ Rest in Peace Ed. Thanks for all the good times.

04-09-2003, 06:36 AM	#10
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Yes c-10, c-20 and c-30 are different shocks. __________________ Rest in Peace Ed. Thanks for all the good times.

04-12-2003, 01:55 AM	#12
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	Re: MOTHERTRUCKERS how wierd, I work about 1/4 mile from Sport Direct & did not know they were there. Can you get me a better price than if I am just an average idiot walking in thier front door? (I consider myself an "average idiot"). Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.