just out of curiousity - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969lb · 03-19-2002, 11:06 PM

how much can i get for a just rebuilt 305?
it was magna fluxed,hot tanked and honed
new rings,new crankshaft oil pump quadrajet manifold and carb.rebuilt heads etc.
i can sell put together or not im trying to pry this truck off an old lady and its got a 350 well i dun nd the 305 so im going to nd bargaining money......
its been sitting in her yard since 86
72swb/stepside no rust perfect body 100%rust free cab only 2 dings in the entire body.

69LWB3/4Ton · 03-19-2002, 11:18 PM

I'll start the bidding at 15dlrs

Mike C · 03-19-2002, 11:21 PM

I've got 2 running 305's and know 3 other guys who have them as well. Free for the taking. Can't give a 305 away around here. Literally.

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable

72gmc1/2ton · 03-19-2002, 11:25 PM

I BELEIVE THAT THE 305 LIKE 307 (WHICH I HAVE) ARE GUTLESS WONDER AND JUST SUCK DOWN GAS.

imdarren · 03-19-2002, 11:45 PM

1969lb, WoW! It's not soundin' like what ya wanna hear. Not good at all... I rarely hear anything positive about the Chevy 305 either. I hope you work somthing out for the 72 though! Sounds nice! Darren

Longhorn Man · 03-20-2002, 12:06 AM

How honest are you? You could try to pass it off as a 350...you always here bout someone gettin a 350 only to discover it's a 305. I'm not recomending it...
You could also find something that just needs a small block, slap that sucker in there, and sell it. Like maybe...an S-10.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!

Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

69 longhorn · 03-20-2002, 12:36 AM

305s dont run too bad in a small truck,I have one in my 89 Ranger.....kinda rattles the ford boys too!........69 longhorn

*Fast68Chevy* · 03-20-2002, 01:12 AM

i had a fresh rebuilt 1980 caprice 305 with original stockl aluminum intake manifold and rebuilt roch q jet in my 68 c10 with 3 speed and then th350 with the 3,73 rear and it was nice !! it moved right alont wayyyyyyy better than the 307 it replaced. i had no complaints at all, i later put 1.94 int valves and edelbrock springs on it and vroom vroom was more fun, wasnt doggy one bit a tall, it all just depends on the condition of the engine, 307 would have been same way had it not had 200,000 + miles on it and the snapped and bent over the #1 piston rod and also spun other bearings

if it runs good then use it, all it is is an anemic 350, 305 are good dem derby engines and spare engines to get tou by when 350 blows up

cant rag on it if it runs good,

O'l Buck · 03-20-2002, 01:25 AM

the only part of a 305 that's any good is the heads, you can use the intake on other small blocks too, but everyone as 3 of those. In my area, you can get 100 bucks for a set of heads. The stock car guys like them for the added compression on a 350.

------------------
'72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

67 Cutlass convertible
330, 3spd stick

90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

**67 cst swb** · 03-20-2002, 01:41 AM

I hear the Navy is buying surplus 305's

...They work good for boat anchors...
just kidding...
Bryan in So.Dak

------------------
Bryan in South Dakota
-67 CST(CE147J122461)327-4bbl(missing) w/TH400 w/AC,PS,PB,3pc bench/bucket seat,small window,LWB. orig. blue/blue. needs serious restoration
-67 CST(plain janer) 283/MT LWB ---soon to look like 68 with 350/TH350 ShortWide Box
-2000 Silverado 1/2ton 2wd x-cab w/4th door
***future projects***
A 67/68 CST,SWB,350/TH350,Lowered 5/7, rollin' on 17's, not air bagged.using above listed 67 CST (janer)

Longhorn Man · 03-20-2002, 07:38 AM

The 305 heads will bump up compression, but they are so restrictive you can actually hear the air stacking up in it where it can't get out as fast as it goes in.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!

Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

71GMCstreet · 03-20-2002, 07:53 AM

The 305, no-matter-how you build them are doggy at best. I have 2. One in the street rig, and one in my 98. The oldie looks great under the hood and is carbed. The newbie is computered and SUCKS!!!! I hate the throttle response and de-acceleration. The street rig is crying to have a bigger motor in her, and I hope later this spring she'll get her wish.

bobs409 · 03-20-2002, 08:00 AM

Nothing wrong with the 307's. Everyone I had/have serve me well.

------------------
63 Impala*66 Chevelle SS*69 Chevelle*69 C10 Stepside*71 Cheyenne 20*72 Chevelle

Parts for sale:
http://www.angelfire.com/trek/mr409/items4sale.html

sam's 72 · 03-20-2002, 02:18 PM

I he a 305 in my 72 lwb right now, and I am replaceing it with a 383 sbc, and I already have some one that wants the 305 for a jeep, and I am just giving it away!
sam

03-19-2002, 11:21 PM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	I've got 2 running 305's and know 3 other guys who have them as well. Free for the taking. Can't give a 305 away around here. Literally. ------------------ 70 GMC 3/4 ton Sierra Grande 402/TH400 72 Jimmy 4WD 4spd 4" & 35's 64 Corvette Coupe 68 Camaro 'vert TPI & TH700 69 Z/28 355 12.6's @110 72 Datsun 240Z-ol' reliable __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

03-19-2002, 11:45 PM	#5
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	1969lb, WoW! It's not soundin' like what ya wanna hear. Not good at all... I rarely hear anything positive about the Chevy 305 either. I hope you work somthing out for the 72 though! Sounds nice! Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

03-20-2002, 12:36 AM	#7
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	305s dont run too bad in a small truck,I have one in my 89 Ranger.....kinda rattles the ford boys too!........69 longhorn __________________ http://community.webshots.com/user/hotrodhorn

03-20-2002, 01:25 AM	#9
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	the only part of a 305 that's any good is the heads, you can use the intake on other small blocks too, but everyone as 3 of those. In my area, you can get 100 bucks for a set of heads. The stock car guys like them for the added compression on a 350. ------------------ '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s 67 Cutlass convertible 330, 3spd stick 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

03-20-2002, 01:41 AM	#10
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	I hear the Navy is buying surplus 305's ...They work good for boat anchors... just kidding... Bryan in So.Dak ------------------ Bryan in South Dakota -67 CST(CE147J122461)327-4bbl(missing) w/TH400 w/AC,PS,PB,3pc bench/bucket seat,small window,LWB. orig. blue/blue. needs serious restoration -67 CST(plain janer) 283/MT LWB ---soon to look like 68 with 350/TH350 ShortWide Box -2000 Silverado 1/2ton 2wd x-cab w/4th door *future projects* A 67/68 CST,SWB,350/TH350,Lowered 5/7, rollin' on 17's, not air bagged.using above listed 67 CST (janer) __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

03-19-2002, 11:06 PM	#1
1969lb Registered User Join Date: Mar 2002 Location: oakdale,ca,usa Posts: 31	just out of curiousity how much can i get for a just rebuilt 305? it was magna fluxed,hot tanked and honed new rings,new crankshaft oil pump quadrajet manifold and carb.rebuilt heads etc. i can sell put together or not im trying to pry this truck off an old lady and its got a 350 well i dun nd the 305 so im going to nd bargaining money...... its been sitting in her yard since 86 72swb/stepside no rust perfect body 100%rust free cab only 2 dings in the entire body. __________________ hmm...looking for a swb frame with disc brakes

03-19-2002, 11:18 PM	#2
69LWB3/4Ton Registered User Join Date: Jan 2002 Location: Oceanside, CA Posts: 120	I'll start the bidding at 15dlrs

03-19-2002, 11:25 PM	#4
72gmc1/2ton Registered User Join Date: Feb 2002 Location: englewood co usa Posts: 94	I BELEIVE THAT THE 305 LIKE 307 (WHICH I HAVE) ARE GUTLESS WONDER AND JUST SUCK DOWN GAS.

03-20-2002, 12:06 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	How honest are you? You could try to pass it off as a 350...you always here bout someone gettin a 350 only to discover it's a 305. I'm not recomending it... You could also find something that just needs a small block, slap that sucker in there, and sell it. Like maybe...an S-10. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

03-20-2002, 01:12 AM	#8
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	i had a fresh rebuilt 1980 caprice 305 with original stockl aluminum intake manifold and rebuilt roch q jet in my 68 c10 with 3 speed and then th350 with the 3,73 rear and it was nice !! it moved right alont wayyyyyyy better than the 307 it replaced. i had no complaints at all, i later put 1.94 int valves and edelbrock springs on it and vroom vroom was more fun, wasnt doggy one bit a tall, it all just depends on the condition of the engine, 307 would have been same way had it not had 200,000 + miles on it and the snapped and bent over the #1 piston rod and also spun other bearings if it runs good then use it, all it is is an anemic 350, 305 are good dem derby engines and spare engines to get tou by when 350 blows up cant rag on it if it runs good,

03-20-2002, 07:38 AM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The 305 heads will bump up compression, but they are so restrictive you can actually hear the air stacking up in it where it can't get out as fast as it goes in. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

03-20-2002, 07:53 AM	#12
71GMCstreet Registered User Join Date: Dec 2001 Posts: 97	The 305, no-matter-how you build them are doggy at best. I have 2. One in the street rig, and one in my 98. The oldie looks great under the hood and is carbed. The newbie is computered and SUCKS!!!! I hate the throttle response and de-acceleration. The street rig is crying to have a bigger motor in her, and I hope later this spring she'll get her wish.

03-20-2002, 08:00 AM	#13
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Nothing wrong with the 307's. Everyone I had/have serve me well. ------------------ 63 Impala66 Chevelle SS69 Chevelle69 C10 Stepside71 Cheyenne 20*72 Chevelle Parts for sale: http://www.angelfire.com/trek/mr409/items4sale.html __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

03-20-2002, 02:18 PM	#14
sam's 72 Senior Member Join Date: Nov 2001 Location: Pasadena, Texas, USA Posts: 1,005	I he a 305 in my 72 lwb right now, and I am replaceing it with a 383 sbc, and I already have some one that wants the 305 for a jeep, and I am just giving it away! sam __________________ 72 LWB chevy truck. Pasadena, Texas

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.