![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Sluggish acceleration and won't go over 45mph
Okay so my tranny went out last month so i had it rebuilt with a shift kit and while I was there I figured why not go with a 3000 stall converter. Anyways, after I installed the tranny my truck is way slower and doesn't launch as hard as when it was stock. Any ideas?
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Re: Sluggish acceleration and won't go over 45mph
Anybody? Lol
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: Sluggish acceleration and won't go over 45mph
Be patient...someone will chime in with an idea. Good Luck.
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Re: Sluggish acceleration and won't go over 45mph
Lol I am inpatient it makes me mad cause I want my power again.
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Oct 2010
Location: Buckeye Arizona
Posts: 470
|
Re: Sluggish acceleration and won't go over 45mph
Why would you put such a high stall converter in there?...
The poor thing is probably never locking up, you have to remember a converter is a big pump, if you don't spin the pump enough, you ain't makin stuff turn. Change the converter. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Re: Sluggish acceleration and won't go over 45mph
Well I figured since the cam makes power around 2500 I've heard to go about 5 to 8 hundred over for the tc.
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Oct 2010
Location: Buckeye Arizona
Posts: 470
|
Re: Sluggish acceleration and won't go over 45mph
Well bud, I know the converter goin in my truck is at like 1200-1500.
Just a good, old tow converter, pretty sure it's an Art Carr. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Re: Sluggish acceleration and won't go over 45mph
I don't ever tow with her so I want a dd racetruck lol
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Sluggish acceleration and won't go over 45mph
sounds like you went with too much converter. Go to one of the converter company's web sites and look for what they recomend. Some of them even have tech lines for this. They'll need to know the weight of the truck, tire size, gearing, engine displacement, compresson ratio and cam.
Your complaint is classic "over converter'd" complaint. This is assuming you filled the trans all the way. (check running, warm and on level ground) |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Sluggish acceleration and won't go over 45mph
maybe readup on the board rules concerning double posting next readup on torque converters
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 05-25-2011 at 11:24 AM. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2011
Location: Pueblo, Colorado
Posts: 49
|
Re: Sluggish acceleration and won't go over 45mph
Thanks guys. Y'all are the best!
Posted via Mobile Device
__________________
70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|