Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-06-2011, 01:06 AM | #1 |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Safe to install new radio speakers?
Hi guys,
I need to put a stereo in my truck. I unscrewed the door speakers and they just fell out, there is no wiring to them. Also, is it safe to install the door speakers? I notice that the drain holes are right behind them and that any type of water, rain or car wash will go down into the door. Won't this cause the speakers to short out? If not...how do I go about wiring the speakers? Do I have to feed the wires thru the door somehow?
__________________
Thanks, Emil 1972 Chevy C20 |
06-06-2011, 01:09 AM | #2 |
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: Safe to install new radio speakers?
Yes you do have to feed the wire thru the door, and yes the speakers can get wet. You can buy guards so that the water drains around the speakers but you might consider waterproof cones.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7 |
06-06-2011, 05:20 PM | #3 |
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
|
Re: Safe to install new radio speakers?
I mounted a pair of speaks in my doors, (the holes were already there) and I used the bottom half of a couple antifreeze jugs to cover the speakers, I just measured the depth of the door, cut the jugs about 1/4" deeper so they would stay in place, then I ran a bead of silicone around the top half only to prevent water from running in, I left the bottom half without sealer so any water that may get in could drain out. Not only does it protect your speakers it makes them sound better. Since this alignment creates a somewhat sealed chamber I also filled the area in the jugs with some acoustic foam, this makes the "box" react as though it's bigger and will improve the lower end. It's free and easy.
Posted via Mobile Device |
06-06-2011, 05:42 PM | #4 |
Registered User
Join Date: Mar 2009
Location: independence mo
Posts: 2,111
|
Re: Safe to install new radio speakers?
Since your doors are already cut I would cut them more and put in 6x9s. They will sound alot better for not much more.
__________________
I'm not as good as I once was, But I'm as good once as I ever was. |
06-06-2011, 09:30 PM | #5 |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Re: Safe to install new radio speakers?
Thanks for the info guys. What size do I have now? Can you guys tell by the holes? As for upgrading to 6x9's, aren't 6x9's more of a rectangle shape vs the circle I currently have? I would have to cut alot more of the door?
__________________
Thanks, Emil 1972 Chevy C20 |
06-06-2011, 11:16 PM | #6 | |
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
|
Re: Safe to install new radio speakers?
Quote:
If you go to partsexpress look a their house brand which is "DAYTON", many of the Dayton brands are clines of ScanSpeak speakers which are some of the absolute best quality drivers on the planet. these are built right next to many name brand speakers and are half the price! You could also check out the "Vifa" brand, they are excellent quality and a fair price. I would avoid brands like Pyle as they actually are a pile! I build some very high quality cabinets, mostly home stereo speaker cabinets that sell for several thousand dollars, but I have years and years of experience building and working with speakers and designing and building the crossovers as well. If you need any help let me know, I can give you some ideas on what will make your tunes sound very nice! Posted via Mobile Device |
|
06-07-2011, 08:39 AM | #7 | |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Re: Safe to install new radio speakers?
Quote:
__________________
Thanks, Emil 1972 Chevy C20 |
|
06-07-2011, 12:52 PM | #8 |
Registered User
Join Date: Jan 2011
Location: Redmond, OR
Posts: 763
|
Re: Safe to install new radio speakers?
I used to just put a plastic bag over the back of the speakers when putting them in the door. Attached the speaker mounting screws through the bag and then trimmed off the excess before putting the cover back on.
Cheap and easy way to keep water off the back of the speaker. Yours looks like holes for a 6.5" speaker. Most places carry them (Walmart has several for $40-80/pr. I put a set of Sony Xplodes in mine and they sound fine for $40. Walmart has a Dual brand AM/FM/CD/MP# for $50. Did that and two sets of speakers I had laying around. Didn't want to spend a fortune on something that could be stolen. Works fine. Put 2 6x9s under the seat and two 6.5s in a small triangular box attached to the front of the seat with a cupholder on top. Sounds great to me (between being half deaf and all the cab noise anyway).
__________________
68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress |
06-07-2011, 01:29 PM | #9 | |
Registered User
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
|
Re: Safe to install new radio speakers?
Quote:
On top of that, we lived up in the "Boonies" with a signal of 1 Bar (if I was lucky). So now its been 2 years without a Radio, but I bought, Aftermarket Kick Panels, Speakers, Head Unit, and my Son is installing it for me. My last Truck had speakers in the Door, and they worked, but having the sound that "Low" in the Truck, I had to CRANK IT UP, and it didn't sound good. I decided to leave my Doors intact on this Truck. The 1 thing I DID do differently THIS time, was to buy an Aftermarket replacement speaker for the Dash. It actually bolts into the same spot (with no Modifications) and contains 2 speakers with giant magnets, that can take the Mids/Highs up to 80 Watts. Since I'm running just an Alpine Head Unit with no External Amps along with 5 1/4" speakers in the Kick Panels, it should provide a nice Balance without overpowering anything. Here's a link for the Dash Speaker: http://www.brotherstrucks.com/prodin...number=UDDSA00
__________________
Hello members... I'd like you to know that I sold, my 72 GMC (Ratikle), back in November of 2011. I don't visit the site much anymore, but please feel free, to drop me a private message. RIP...."RATIKLE" |
|
06-07-2011, 06:47 PM | #10 |
Registered User
Join Date: Mar 2009
Location: independence mo
Posts: 2,111
|
Re: Safe to install new radio speakers?
From the looks of the holes they are to close to edge of the door to do 6x9s. I have 6 1/4sony explodes in a center console and 6x9s in boxes behind the seat. I think it sounds good.
__________________
I'm not as good as I once was, But I'm as good once as I ever was. |
06-07-2011, 07:40 PM | #11 |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Re: Safe to install new radio speakers?
Thanks guys, keep the info coming!
__________________
Thanks, Emil 1972 Chevy C20 |
06-08-2011, 09:28 AM | #12 |
Registered User
Join Date: Apr 2010
Location: Jeffersonville, Indiana
Posts: 136
|
Re: Safe to install new radio speakers?
I had 6x9's in my old 70 CST and they sounded fine. When I decided to put tunes in the new rig, I decided to ask some questions of the audio gurus. They recommended going with a 6" in the door for sound quality, and they were right! The music is soo much more crisp.
For the guys with smart phones, I bought a Sony Xplode head unit with bluetooth. You wanna talk about the greatest thing since sliced bread!!! My pickup had the factory radio still in place, and it was in really good shape. I didn't want to cut my dash, I put the stereo in the glove box. With the bluetooth connectivity, I never have to touch it. Hit play on the ol iPhone, and adjust the volume with the volume buttons on the phone. Great crystal clean tunes, with the factory look! |
06-09-2011, 08:15 PM | #13 |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Re: Safe to install new radio speakers?
Thanks for the help!
__________________
Thanks, Emil 1972 Chevy C20 |
06-09-2011, 08:21 PM | #14 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: Safe to install new radio speakers?
|
06-09-2011, 10:35 PM | #15 | |
Registered User
Join Date: Oct 2010
Location: Tujunga, CA
Posts: 262
|
Re: Safe to install new radio speakers?
Quote:
__________________
Thanks, Emil 1972 Chevy C20 |
|
06-10-2011, 05:34 AM | #16 |
Registered User
Join Date: May 2008
Location: S.W. Chicago, IL.
Posts: 317
|
Re: Safe to install new radio speakers?
I used the baffles in my leaky truck doors. Worked fine.
Purchased them many, many years ago at Warshawsky's in Chicago. Now goes by the name J.C. Whitney & Co. I need a new set for my current project. Thanks for the Crutchfield link! |
06-10-2011, 10:07 AM | #17 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: Safe to install new radio speakers?
Glad I could help.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|