KS 71 chevy C20 cheyenne Big Block getting parted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 06-21-2011, 10:41 PM

Please ask questions in thread. I'll try my best to get it parted quickly but its going to be Fri before I much time after work. Pay pal, money orders or cash. I ship fed ex and charge what they charge me. I give buyers 24 hours to decide once I answer their question, then I go to next buyer. If I don't have something listed you need ask in thread and I'll get pic and price
Motor is gone but have some of the motor parts
1971 c20 with title
Cab is decent, has rust in front mounts, rockers, corners and and lower kick panels. One spot on drivers floor board about the size of silver dollar. Bare cab with windshield $350 with title
high hump $80 shipped
door panels $50 plus shipping-SOLD
front sway abr $60 shipped
wings are driver quality, chrome has some pitting drivers side is better than pass $35 plus shipping for pair-SOLD
mirrors $30 plus shipping-SOLD
seat $30, no ship
doors are decent, some rust $80 for pair
driver fender is junk
pass fender has some rust on rear corner but none on front cup
bed has some rust but not real bad, floor is good $200
gate is good for driver, some dents, no rust $70 plus ship-SOLD
shroud is good $100 plus ship
power steering brackets $81 shipped
motor stands and mounts $115 shipped
Complete set of AC brackets $265 shipped
Alt brackets, upper one looks like its been welded $80 shipped
power brake booster setup $40 plus ship
400 kickdown gas pedal $63 shipped-SOLD
turbo 400 tranny linkage $48 shipped
4 core upper and lower radiator holddowns $35 shipped-SOLD
4 core radiator $75 plus shipping
outer AC box $40 plus ship-SOLD
headers $60 plus ship-SOLD
air cleaner and spacer $55 shipped
heat shield with some rust and tube $115 shipped
fan $30 plus ship
steering column $65 shipped
gauge setup $38 shipped
visors $35 shipped
am radio unknown condition $42 shipped
headliner $75 shipped
headliner trim WILL break tabs when I take it off, so if you want it with broken tabs $30 plus ship
rear sliding window $50 plus ship-SOLD
outer AC balls and housings $35 shipped
jack and lug wrench and handle $50 plus ship
holley carb $30 plus ship
AT crossmember $50 shipped
16 inch wheels $100 for set of 4 plus ship without tires Or $80 picked up
cargo light setup with some pitting $31 shipped
Ac control has broken lower arm
Thanks Randy

teeitup · 06-21-2011, 10:43 PM

111111111

teeitup · 06-21-2011, 10:44 PM

22222

teeitup · 06-21-2011, 10:46 PM

333333

teeitup · 06-21-2011, 10:48 PM

444444

teeitup · 06-21-2011, 10:50 PM

66666666

teeitup · 06-21-2011, 10:49 PM

5555555

teeitup · 06-21-2011, 10:51 PM

7777777

teeitup · 06-21-2011, 10:53 PM

99999999

teeitup · 06-21-2011, 10:55 PM

wwwwwww

teeitup · 06-21-2011, 10:58 PM

tttttttt

HDBOB · 06-21-2011, 11:45 PM

If avail, maybe combine ship ? 400 kickdown gas pedal switch assy, (do you have the wire harness to trans ?) upper, lower 4 row rad mounts.

Biscayne Stocker · 06-21-2011, 11:57 PM

How much for inner and outer A/C boxes, the cowl flap with the vac. pod, and the right kick panel flap with the vac. pod? Also both wing windows?shipped to 21122 Thanks alot Scott Chalk

Vintage Windmills · 06-22-2011, 12:03 AM

Randy, that was a quick teardown! Do you know if there was a darker blue interior available in 70 chevys or was this it? I am thinking on those door panels man I should have noticed those when i was there! any defects on them? Rust on backside or peeling of vinyl?

**zicc1835** · 06-22-2011, 12:11 AM

if the headers are solid i will take them shipped to 07981

**DeadheadNM** · 06-22-2011, 05:31 AM

I'll take the upper tailgate trim. Pete

blap · 06-22-2011, 05:42 AM

In line for the tailgate trim

teeitup · 06-22-2011, 06:43 AM

HDBob, I'll see if harness is all there. Sure they can be shipped together to save you some

Biscayne Stocker, Scott, $80 plus ship for all AC stuff. Wing windows $60 shipped. I have a better set of wing windows coming in but they would be higher priced

Vintage Windmills, Jud, I've seen a rear dark blue before but not sure what year it was in. I'll check these out better for you

zicc1835, I'll get a shipping quote later today

DeadheadNm, Pete, I'll get better pics of them

blap, your 2nd on them

Thanks Randy

hounddogs! · 06-22-2011, 08:33 AM

OK Randy. I'll take the gate. Let me know if you break the bed apart. I'm still watching for a straight header panel.

Loren

Hammer500 · 06-22-2011, 10:11 AM

I am interested in the AC stuff and the better set of wing windows shipped to 59484 if Biscayne Stocker passes.
Jeffery

**zicc1835** · 06-23-2011, 01:25 AM

Quote:

Originally Posted by teeitup

HDBob, I'll see if harness is all there. Sure they can be shipped together to save you some

Biscayne Stocker, Scott, $80 plus ship for all AC stuff. Wing windows $60 shipped. I have a better set of wing windows coming in but they would be higher priced

Vintage Windmills, Jud, I've seen a rear dark blue before but not sure what year it was in. I'll check these out better for you

zicc1835, I'll get a shipping quote later today

DeadheadNm, Pete, I'll get better pics of them

blap, your 2nd on them

Thanks Randy

Randy
thanks i have your PP info from last time so send ship quote and we should be good to go
thanks
jess

teeitup · 06-23-2011, 06:38 AM

HDBob, ok its yours. Let me get off the 4 cores and get a pic of them for you

Zicc1835, Jess, I'll try to gt a quote today but it may be Fri. I'll have to find a box big enough to ship them in

Thanks Randy

**bigdon-70blazer** · 06-23-2011, 07:04 AM

Is there a jack in there? And I will take the radio and speaker. Please include all associated screws also. Don

Lemield · 06-23-2011, 08:58 AM

Hi Randy....

No problem at all with dents in the mirror head...it's the lower long brackets that I'm really interested in...as long as they are solid, I'll take them. I still want the whole set though....gives me some spare parts that way.

Thanks!

turp mcspray · 06-22-2011, 02:14 PM

Interested in the gauge cluster. Could you get a pic? Thanks.

06-21-2011, 10:41 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	71 chevy C20 cheyenne Big Block getting parted Please ask questions in thread. I'll try my best to get it parted quickly but its going to be Fri before I much time after work. Pay pal, money orders or cash. I ship fed ex and charge what they charge me. I give buyers 24 hours to decide once I answer their question, then I go to next buyer. If I don't have something listed you need ask in thread and I'll get pic and price Motor is gone but have some of the motor parts 1971 c20 with title Cab is decent, has rust in front mounts, rockers, corners and and lower kick panels. One spot on drivers floor board about the size of silver dollar. Bare cab with windshield $350 with title high hump $80 shipped door panels $50 plus shipping-SOLD front sway abr $60 shipped wings are driver quality, chrome has some pitting drivers side is better than pass $35 plus shipping for pair-SOLD mirrors $30 plus shipping-SOLD seat $30, no ship doors are decent, some rust $80 for pair driver fender is junk pass fender has some rust on rear corner but none on front cup bed has some rust but not real bad, floor is good $200 gate is good for driver, some dents, no rust $70 plus ship-SOLD shroud is good $100 plus ship power steering brackets $81 shipped motor stands and mounts $115 shipped Complete set of AC brackets $265 shipped Alt brackets, upper one looks like its been welded $80 shipped power brake booster setup $40 plus ship 400 kickdown gas pedal $63 shipped-SOLD turbo 400 tranny linkage $48 shipped 4 core upper and lower radiator holddowns $35 shipped-SOLD 4 core radiator $75 plus shipping outer AC box $40 plus ship-SOLD headers $60 plus ship-SOLD air cleaner and spacer $55 shipped heat shield with some rust and tube $115 shipped fan $30 plus ship steering column $65 shipped gauge setup $38 shipped visors $35 shipped am radio unknown condition $42 shipped headliner $75 shipped headliner trim WILL break tabs when I take it off, so if you want it with broken tabs $30 plus ship rear sliding window $50 plus ship-SOLD outer AC balls and housings $35 shipped jack and lug wrench and handle $50 plus ship holley carb $30 plus ship AT crossmember $50 shipped 16 inch wheels $100 for set of 4 plus ship without tires Or $80 picked up cargo light setup with some pitting $31 shipped Ac control has broken lower arm Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-27-2011 at 11:22 PM.

06-21-2011, 10:43 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 111111111 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:44 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 22222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:46 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 333333 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:48 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 444444 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:50 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 66666666 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:49 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 5555555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:51 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 7777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:53 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted 99999999 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:55 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted wwwwwww Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 10:58 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted tttttttt Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-21-2011, 11:45 PM	#12
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: 71 chevy C20 cheyenne Big Block getting parted If avail, maybe combine ship ? 400 kickdown gas pedal switch assy, (do you have the wire harness to trans ?) upper, lower 4 row rad mounts.

06-21-2011, 11:57 PM	#13
Biscayne Stocker Registered User Join Date: Jun 2010 Location: Pasadena, Md Posts: 78	Re: 71 chevy C20 cheyenne Big Block getting parted How much for inner and outer A/C boxes, the cowl flap with the vac. pod, and the right kick panel flap with the vac. pod? Also both wing windows?shipped to 21122 Thanks alot Scott Chalk

06-22-2011, 12:03 AM	#14
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 71 chevy C20 cheyenne Big Block getting parted Randy, that was a quick teardown! Do you know if there was a darker blue interior available in 70 chevys or was this it? I am thinking on those door panels man I should have noticed those when i was there! any defects on them? Rust on backside or peeling of vinyl? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-22-2011, 12:11 AM	#15
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,298	Re: 71 chevy C20 cheyenne Big Block getting parted if the headers are solid i will take them shipped to 07981 __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

06-22-2011, 05:31 AM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: 71 chevy C20 cheyenne Big Block getting parted I'll take the upper tailgate trim. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-22-2011, 05:42 AM	#17
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 71 chevy C20 cheyenne Big Block getting parted In line for the tailgate trim

06-22-2011, 06:43 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted HDBob, I'll see if harness is all there. Sure they can be shipped together to save you some Biscayne Stocker, Scott, $80 plus ship for all AC stuff. Wing windows $60 shipped. I have a better set of wing windows coming in but they would be higher priced Vintage Windmills, Jud, I've seen a rear dark blue before but not sure what year it was in. I'll check these out better for you zicc1835, I'll get a shipping quote later today DeadheadNm, Pete, I'll get better pics of them blap, your 2nd on them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-22-2011, 08:33 AM	#19
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 887	Re: 71 chevy C20 cheyenne Big Block getting parted OK Randy. I'll take the gate. Let me know if you break the bed apart. I'm still watching for a straight header panel. Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

06-22-2011, 10:11 AM	#20
Hammer500 Registered User Join Date: May 2009 Location: Calgary, Alberta Posts: 115	Re: 71 chevy C20 cheyenne Big Block getting parted I am interested in the AC stuff and the better set of wing windows shipped to 59484 if Biscayne Stocker passes. Jeffery __________________ 69 Chev C/10 350/200 4R LWB 69 Chev K/20 4x4 350/4sp LWB 69 GMC Sierra Grande 396/400 LWB

06-23-2011, 06:38 AM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 chevy C20 cheyenne Big Block getting parted HDBob, ok its yours. Let me get off the 4 cores and get a pic of them for you Zicc1835, Jess, I'll try to gt a quote today but it may be Fri. I'll have to find a box big enough to ship them in Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-23-2011 at 06:38 AM.

06-23-2011, 07:04 AM	#23
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: 71 chevy C20 cheyenne Big Block getting parted Is there a jack in there? And I will take the radio and speaker. Please include all associated screws also. Don

06-23-2011, 08:58 AM	#24
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: 71 chevy C20 cheyenne Big Block getting parted Hi Randy.... No problem at all with dents in the mirror head...it's the lower long brackets that I'm really interested in...as long as they are solid, I'll take them. I still want the whole set though....gives me some spare parts that way. Thanks! __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet" Last edited by Lemield; 06-23-2011 at 08:59 AM.

06-22-2011, 02:14 PM	#25
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: 71 chevy C20 cheyenne Big Block getting parted Interested in the gauge cluster. Could you get a pic? Thanks. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.