which is the right tap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vasquezmrysvll · 06-29-2011, 03:41 PM

im going to drill and tap my vortec heads to accept the stock temp sender. what is the correct tap needed?

Tx Firefighter · 06-29-2011, 04:53 PM

1/2 npt

jamesi20 · 06-29-2011, 05:30 PM

If you want to do it properly,try to get a tapered reamer for the hole you drill,as it will make for a lot nicer job.

06-29-2011, 03:41 PM	#1
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	which is the right tap? im going to drill and tap my vortec heads to accept the stock temp sender. what is the correct tap needed? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

06-29-2011, 04:53 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: which is the right tap? 1/2 npt __________________ I'm on the Instagram- @Gearhead_Kevin

06-29-2011, 05:30 PM	#3
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: which is the right tap? If you want to do it properly,try to get a tapered reamer for the hole you drill,as it will make for a lot nicer job.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.