Show your LS Swap engine bay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

softballnrd27 · 07-11-2011, 12:50 PM

Like the title says, post up a picture or 2 of your LSx swap engine bay.

ls1nova71 · 07-11-2011, 01:16 PM

Not done yet, but close.

**Clyde65** · 07-11-2011, 01:52 PM

Here is mine, kinda dark and dirty but its in there!

usmcchevy · 07-11-2011, 02:16 PM

Dirty with lots left to do.

Really need to do something with the brake set up and AC holes.

BR3W CITY · 07-11-2011, 04:27 PM

A couple of mine

late68 · 07-19-2011, 11:39 PM

Quote:

Originally Posted by BR3W CITY

A couple of mine

Does that engine cover come complete like that? As far as covering the entire top of the motor? Never seen this one, heard of the vortec max though.

67C10BUB · 07-12-2011, 06:02 AM

Here's mine. I drive it every day and I love it!!!

TxSqueeze · 07-13-2011, 11:33 AM

Quote:

Originally Posted by 67C10BUB

Here's mine. I drive it every day and I love it!!!

What paint was used on the firewall, inner fenders, and underside of hood?

67C10BUB · 07-13-2011, 02:40 PM

Quote:

Originally Posted by TxSqueeze

What paint was used on the firewall, inner fenders, and underside of hood?

Rustoleum Semi-gloss black. It is holding up well so far, but when I can afford to have my truck repainted I am going to get it all red to match.

TxSqueeze · 07-13-2011, 02:46 PM

Sounds good, that's what I had planned on using. Thanks

softballnrd27 · 07-12-2011, 01:39 PM

I look forward to adding mine to this thread when I get back

matthew20061 · 07-13-2011, 04:15 AM

Here's mine:

duwem · 07-15-2011, 12:39 PM

Quote:

Originally Posted by matthew20061

Here's mine:

Details on the valve covers and coil location/mounts please

**TR65** · 07-15-2011, 09:37 PM

Man, These are some nice looking setups!!

Here is mine.

TR

mac72 · 07-19-2011, 01:55 PM

Quote:

Originally Posted by TR65

Man, These are some nice looking setups!!

Here is mine.

TR

TR , is that an air bag sol. your using as a heater control valve?

WORP67 · 07-17-2011, 03:08 PM

Quote:

Originally Posted by matthew20061

Here's mine:

Also what headers are those?

Gordonr1973 · 07-18-2011, 09:02 AM

Motors look very nice all you guys!!

tk-mpl · 07-19-2011, 12:40 PM

Here's my baby

WORP67 · 07-19-2011, 01:22 PM

^^^ What headers did you use?

tk-mpl · 07-19-2011, 01:49 PM

Pasesetters F-body long tubes..... They fit pretty good with little mods.
Posted via Mobile Device

WORP67 · 07-19-2011, 02:44 PM

Thanks TK. How do you think they perform compared to stock ones?

tk-mpl · 07-19-2011, 04:01 PM

I imagine they perform better then the manifolds , but I did it more so for the looks.
Posted via Mobile Device

WORP67 · 07-19-2011, 04:16 PM

When you say little mods what did you have to do?

tk-mpl · 07-19-2011, 04:28 PM

All I did was shave the framerail alittle on the bottom of both sides and on the top for the RH side. Also had to shave the lower control arm and dent in one tube on the LH side

I will post pic later if I can find them.
Posted via Mobile Device

WORP67 · 07-19-2011, 04:48 PM

Awesome thanks. I dont know if I will be able to run long tube or not on a bagged truck with a Z'ed front frame. I will have to look into that.

07-11-2011, 12:50 PM	#1
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Show your LS Swap engine bay Like the title says, post up a picture or 2 of your LSx swap engine bay. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

07-11-2011, 01:16 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Show your LS Swap engine bay Not done yet, but close. Attached Images

07-11-2011, 01:52 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Show your LS Swap engine bay Here is mine, kinda dark and dirty but its in there! Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-11-2011, 02:16 PM	#4
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: Show your LS Swap engine bay Dirty with lots left to do. Really need to do something with the brake set up and AC holes. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

07-11-2011, 04:27 PM	#5
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Show your LS Swap engine bay A couple of mine __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-12-2011, 06:02 AM	#7
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Show your LS Swap engine bay Here's mine. I drive it every day and I love it!!! Attached Images __________________ 67 5.3L Build

07-13-2011, 02:46 PM	#10
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Show your LS Swap engine bay Sounds good, that's what I had planned on using. Thanks __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

07-12-2011, 01:39 PM	#11
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Show your LS Swap engine bay I look forward to adding mine to this thread when I get back __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

07-13-2011, 04:15 AM	#12
matthew20061 69' Chevy Stepside Join Date: Mar 2008 Location: Anchorage, Ak Posts: 526	Re: Show your LS Swap engine bay Here's mine: __________________ -Matthew -69' Chevy Custom/10 Shortbed Stepside 2WD "Copperhead" - Restored, 6.0L LQ9 Built. L92 Heads and LS3 Intake with Comp Cam 223/231 .610/.617 112 LSA, 4L60E with Shift Kit and Circle-D 3200 Stall Converter ~Build Thread -1957 Chevy BelAir 2 Door Post Sedan, Full Frame off Restoration done myself - 6.0L with T56 six speed -1957 Chevy BelAir 2 Door Post Sedan - Nearly rust free AK car, Project in the waiting -2003' Chevy Silverado SS AWD 6.0L! - Daily Driver

07-15-2011, 09:37 PM	#14
TR65 Senior Member Join Date: Nov 2007 Location: Greenville, SC Posts: 873	Re: Show your LS Swap engine bay Man, These are some nice looking setups!! Here is mine. TR Attached Images __________________ 1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880

07-18-2011, 09:02 AM	#17
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: Show your LS Swap engine bay Motors look very nice all you guys!! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

07-19-2011, 12:40 PM	#18
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: Show your LS Swap engine bay Here's my baby Attached Images __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

07-19-2011, 01:22 PM	#19
WORP67 Registered User Join Date: Jun 2011 Location: Russellville AR Posts: 84	Re: Show your LS Swap engine bay ^^^ What headers did you use?

07-19-2011, 01:49 PM	#20
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: Show your LS Swap engine bay Pasesetters F-body long tubes..... They fit pretty good with little mods. Posted via Mobile Device __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

07-19-2011, 02:44 PM	#21
WORP67 Registered User Join Date: Jun 2011 Location: Russellville AR Posts: 84	Re: Show your LS Swap engine bay Thanks TK. How do you think they perform compared to stock ones?



Register or Log In To remove these advertisements.

07-19-2011, 04:01 PM	#22
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: Show your LS Swap engine bay I imagine they perform better then the manifolds , but I did it more so for the looks. Posted via Mobile Device __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

07-19-2011, 04:16 PM	#23
WORP67 Registered User Join Date: Jun 2011 Location: Russellville AR Posts: 84	Re: Show your LS Swap engine bay When you say little mods what did you have to do?

07-19-2011, 04:28 PM	#24
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: Show your LS Swap engine bay All I did was shave the framerail alittle on the bottom of both sides and on the top for the RH side. Also had to shave the lower control arm and dent in one tube on the LH side I will post pic later if I can find them. Posted via Mobile Device __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

07-19-2011, 04:48 PM	#25
WORP67 Registered User Join Date: Jun 2011 Location: Russellville AR Posts: 84	Re: Show your LS Swap engine bay Awesome thanks. I dont know if I will be able to run long tube or not on a bagged truck with a Z'ed front frame. I will have to look into that.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.