Anyone have power steering pump pic's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue Heeler · 07-13-2011, 10:46 PM

Looking for some pictures on power steering mounting hardware, i bought a bracket at longbeach swap meet but i don't think it's the right one. anyways any pictures will help.

geezer#99 · 07-13-2011, 11:15 PM

What motor?

Blue Heeler · 07-14-2011, 09:36 AM

Quote:

Originally Posted by geezer#99

What motor?

65 chevy 283 motor.

padresag · 07-14-2011, 09:17 PM

Quote:

Originally Posted by Blue Heeler

65 chevy 283 motor.

i posted for alt mounting the other day and it show the pump.
I will take and post the stk p/s pump mounting for you tomorrow if you still need it
ron

Rich 5150 69 · 07-14-2011, 11:26 PM

http://www.scribd.com/full/17608177?...qy43h7a9pmdutn

I think you might be looking for this...on page 113

**Captainfab** · 07-15-2011, 12:47 AM

If your 283 still has the original short water pump, you will need brackets, pump and the pulley from a '68 and older car, or a '72 and older truck. Those parts can usually be found either on ebay or here on the forum in the '67-72 classifieds. The truck parts seem to be easier to find.

Here is one setup minus the pump
http://www.67-72chevytrucks.com/vboa...d.php?t=474688

And here's a guy with just about every bracket imaginable.....
http://www.67-72chevytrucks.com/vboa...d.php?t=439166

Blue Heeler · 07-16-2011, 08:47 AM

Quote:

Originally Posted by padresag

i posted for alt mounting the other day and it show the pump.
I will take and post the stk p/s pump mounting for you tomorrow if you still need it
ron

Thank you sir, still trying to figure this out.

kieth · 07-14-2011, 08:52 AM

Here is a shot of the pump being installed:

1. from the drivers seat with the steering arm
http://kieth.smugmug.com/Trucks/66-G...76075194_7Zf6Y

2. from the front:
http://kieth.smugmug.com/Trucks/66-G...76075211_oopYL

3. Inner frame reinforcing plate:
http://kieth.smugmug.com/Trucks/66-G...76075235_sCxRb

this is the kit from classic chevy, cpp, etc.....did not know captaing fab at the time.

Kieth ps power steering pump was from a 91 suburban 2 wd 1/2 ton.

Frizzle Fry · 07-14-2011, 02:26 PM

Quote:

Originally Posted by kieth

Here is a shot of the pump being installed:

1. from the drivers seat with the steering arm
http://kieth.smugmug.com/Trucks/66-G...76075194_7Zf6Y

2. from the front:
http://kieth.smugmug.com/Trucks/66-G...76075211_oopYL

3. Inner frame reinforcing plate:
http://kieth.smugmug.com/Trucks/66-G...76075235_sCxRb

this is the kit from classic chevy, cpp, etc.....did not know captaing fab at the time.

Kieth ps power steering pump was from a 91 suburban 2 wd 1/2 ton.

Nice. But he said pump.

padresag · 07-14-2011, 04:14 PM

Quote:

Originally Posted by Frizzle Fry

Nice. But he said pump.

no, he didn't say pump ; he said p/s mounting hardware
there was another thread just the other day as I did supply some pics to it
ron.

Frizzle Fry · 07-15-2011, 03:16 AM

Quote:

Originally Posted by padresag

no, he didn't say pump ; he said p/s mounting hardware

Read the thread title...

padresag · 07-15-2011, 09:16 AM

Quote:

Originally Posted by Frizzle Fry

Read the thread title...

kieth · 07-15-2011, 06:30 PM

Quote:

Originally Posted by Frizzle Fry

Read the thread title...

I am getting old and did not have my bifocals with me when I responded.....

kieth · 07-14-2011, 06:58 PM

Quote:

Originally Posted by kieth

Here is a shot of the pump being installed:

1. from the drivers seat with the steering arm
http://kieth.smugmug.com/Trucks/66-G...76075194_7Zf6Y

2. from the front:
http://kieth.smugmug.com/Trucks/66-G...76075211_oopYL

3. Inner frame reinforcing plate:
http://kieth.smugmug.com/Trucks/66-G...76075235_sCxRb

this is the kit from classic chevy, cpp, etc.....did not know captaing fab at the time.

Kieth ps power steering pump was from a 91 suburban 2 wd 1/2 ton.

sorry I showed you the power steering box not the pump......my pump came off of a 91 burb as did the 350 engine, trans, etc.....

geezer#99 · 07-14-2011, 10:35 AM

Nice. More info!!
You looking for the pump brackets on the motor or the PS box brackets on the frame.

Blue Heeler · 07-14-2011, 07:35 PM

Quote:

Originally Posted by geezer#99

Nice. More info!!
You looking for the pump brackets on the motor or the PS box brackets on the frame.

Got Captain fabs gearbox bracket, just need all the other crap.

61_FL_Apache · 07-14-2011, 07:45 PM

Nuttin fancy here, but it works.

geezer#99 · 07-14-2011, 08:59 PM

So it's a 283 so no holes in the head then. Here's a bracket on ebay that might work.
http://cgi.ebay.com/ebaymotors/NEW-5...Q5fAccessories

chevy_mike · 07-15-2011, 01:33 PM

I used my '68 C10 bracket, which stock is a short water pump. In my '65 it was changed over to a long water pump. I was able to add three washers to the main part of the mount (where it attaches to the block) and cut and re-weld the rear bracket (where it mounts to the motor mount).

Not a great pic but you can kind of see what I did. Again, this was a stock '68 C10 bracket and pump.

padresag · 07-15-2011, 02:32 PM

the first 2 are of p/s pump mounting in my 64 w/283

By rondavid at 2011-07-15

By rondavid at 2011-07-15

this is the pump brkt off a 283 from about a 67 chevelle

By rondavid at 2011-07-15

ron

*blackedoutharley* · 07-16-2011, 12:31 AM

http://www.speedwaymotors.com/Small-...cket,3137.html

Blue Heeler · 07-20-2011, 12:57 AM

What ever works. I looked on e-bay trying to see the diff and now i can spot it out. I'm missing the brackets & pullys i have everything else. Thanks Captain. lemme knose

ljackson · 07-20-2011, 07:57 AM

Take a look at http://67-72chevytrucks.com/vboard/s...d.php?t=453346. I used the bracket and pulleys from a 67, 68 283. I do have the short water pump. Check with Paul Duncan and son. He is a member here. http://www.pickupsandparts.com/Home_Page.html The bottom pic is my truck.

Blue Heeler · 07-20-2011, 09:43 PM

Quote:

Originally Posted by ljackson

Take a look at http://67-72chevytrucks.com/vboard/s...d.php?t=453346. I used the bracket and pulleys from a 67, 68 283. I do have the short water pump. Check with Paul Duncan and son. He is a member here. http://www.pickupsandparts.com/Home_Page.html The bottom pic is my truck.

I found the bracket you have at Jegs think i'm just gonna go with that!!
thanks for posting it. I still need Captain fabs pulleys and that should fix my headache... haha

**Captainfab** · 07-20-2011, 11:50 PM

I've go the crank pulley and the '69-'72 pump bracket. I'll send you a PM on the price, so I'm not selling in this section

07-13-2011, 10:46 PM	#1
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Anyone have power steering pump pic's Looking for some pictures on power steering mounting hardware, i bought a bracket at longbeach swap meet but i don't think it's the right one. anyways any pictures will help.

07-13-2011, 11:15 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,776	Re: Anyone have power steering pump pic's What motor?

07-14-2011, 11:26 PM	#5
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: Anyone have power steering pump pic's http://www.scribd.com/full/17608177?...qy43h7a9pmdutn I think you might be looking for this...on page 113 __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

07-15-2011, 12:47 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: Anyone have power steering pump pic's If your 283 still has the original short water pump, you will need brackets, pump and the pulley from a '68 and older car, or a '72 and older truck. Those parts can usually be found either on ebay or here on the forum in the '67-72 classifieds. The truck parts seem to be easier to find. Here is one setup minus the pump http://www.67-72chevytrucks.com/vboa...d.php?t=474688 And here's a guy with just about every bracket imaginable..... http://www.67-72chevytrucks.com/vboa...d.php?t=439166 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 07-15-2011 at 12:59 AM.

07-14-2011, 08:52 AM	#8
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: Anyone have power steering pump pic's Here is a shot of the pump being installed: 1. from the drivers seat with the steering arm http://kieth.smugmug.com/Trucks/66-G...76075194_7Zf6Y 2. from the front: http://kieth.smugmug.com/Trucks/66-G...76075211_oopYL 3. Inner frame reinforcing plate: http://kieth.smugmug.com/Trucks/66-G...76075235_sCxRb this is the kit from classic chevy, cpp, etc.....did not know captaing fab at the time. Kieth ps power steering pump was from a 91 suburban 2 wd 1/2 ton.

07-14-2011, 10:35 AM	#15
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,776	Re: Anyone have power steering pump pic's Nice. More info!! You looking for the pump brackets on the motor or the PS box brackets on the frame.

07-14-2011, 07:45 PM	#17
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Anyone have power steering pump pic's Nuttin fancy here, but it works. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-14-2011, 08:59 PM	#18
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,776	Re: Anyone have power steering pump pic's So it's a 283 so no holes in the head then. Here's a bracket on ebay that might work. http://cgi.ebay.com/ebaymotors/NEW-5...Q5fAccessories

07-15-2011, 01:33 PM	#19
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Anyone have power steering pump pic's I used my '68 C10 bracket, which stock is a short water pump. In my '65 it was changed over to a long water pump. I was able to add three washers to the main part of the mount (where it attaches to the block) and cut and re-weld the rear bracket (where it mounts to the motor mount). Not a great pic but you can kind of see what I did. Again, this was a stock '68 C10 bracket and pump. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

07-15-2011, 02:32 PM	#20
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Anyone have power steering pump pic's the first 2 are of p/s pump mounting in my 64 w/283 By rondavid at 2011-07-15 By rondavid at 2011-07-15 this is the pump brkt off a 283 from about a 67 chevelle By rondavid at 2011-07-15 ron

07-16-2011, 12:31 AM	#21
blackedoutharley Account Suspended Join Date: Jul 2007 Location: Plumas Lake, Ca. Posts: 1,009	Re: Anyone have power steering pump pic's http://www.speedwaymotors.com/Small-...cket,3137.html

07-20-2011, 12:57 AM	#22
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Re: Anyone have power steering pump pic's What ever works. I looked on e-bay trying to see the diff and now i can spot it out. I'm missing the brackets & pullys i have everything else. Thanks Captain. lemme knose

07-20-2011, 07:57 AM	#23
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: Anyone have power steering pump pic's Take a look at http://67-72chevytrucks.com/vboard/s...d.php?t=453346. I used the bracket and pulleys from a 67, 68 283. I do have the short water pump. Check with Paul Duncan and son. He is a member here. http://www.pickupsandparts.com/Home_Page.html The bottom pic is my truck. Attached Images __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. Last edited by ljackson; 07-20-2011 at 08:12 AM.

07-20-2011, 11:50 PM	#25
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: Anyone have power steering pump pic's I've go the crank pulley and the '69-'72 pump bracket. I'll send you a PM on the price, so I'm not selling in this section __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.