![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2011
Location: FREEKIN Windy Lubbock, Texas
Posts: 13
|
On a bagged rear diff shouldn't it be able to lean.
I've seen some rear bag set ups that look like they would have a pretty crappy ride.
Like this mini-truck, he would loose traction if he ran over a 2x4 with one wheel. He should at least loosen the jam nuts so it will flex. Shouldn't it be able to lean a good amount for going in driveways and stuff? It seems like it would knock out the bushings after a while. After looking at the prices for heim ends, I could save some money by building like this guy and don't Heim joints transfer the road noise through to the frame? ![]()
__________________
Some say "The glass is half empty." Some say "The glass is half full." I say "the glass is twice as big as it needs to be, chop it off!!! |
![]() |
![]() |
![]() |
#2 |
Square
Join Date: Feb 2011
Location: Phoenix Arizona
Posts: 1,568
|
Re: On a bagged rear diff shouldn't it be able to lean.
that set up seems like it could lean just fine.
__________________
Squarebody Syndicate |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|