1969 C10 lower control arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kiles_2001 · 08-04-2011, 02:55 PM

Hello everyone, I once saw a post of someone cutting the ball joint section of the lower control arm and welding an extension to it a couple of inches up to lower the truck, has anyone done anything like this? can anyone direct me to any postings like that?

tubbedII · 08-04-2011, 06:42 PM

It's "old-school" technology and no longer the preferred method, but here's a link: http://67-72chevytrucks.com/vboard/s...d.php?t=311691

If you're doing bags, it'd be better to cup the arm because you can reinforce it. If you're going static, drop spindles are a better option.

08-04-2011, 02:55 PM	#1
kiles_2001 Registered User Join Date: Jan 2011 Location: Hayward, California. Posts: 35	1969 C10 lower control arms Hello everyone, I once saw a post of someone cutting the ball joint section of the lower control arm and welding an extension to it a couple of inches up to lower the truck, has anyone done anything like this? can anyone direct me to any postings like that?

08-04-2011, 06:42 PM	#2
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: 1969 C10 lower control arms It's "old-school" technology and no longer the preferred method, but here's a link: http://67-72chevytrucks.com/vboard/s...d.php?t=311691 If you're doing bags, it'd be better to cup the arm because you can reinforce it. If you're going static, drop spindles are a better option. __________________ 1970 2wd Blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.