TX 67 parts wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**STP67-72** · 08-06-2011, 08:52 AM

I am looking for some 67 only vent windows, outer door handle and a upper door hinge. Im looking for a black and a chrome 67 only drivers side vent window assembly. Also a 67 only driver side outside door handle. Also a rebuildable upper driver side door hinge.
Also looking for a 67-72 rear white only rear step bumper. ( patina would be great)

**STP67-72** · 08-12-2011, 11:42 AM

ttt

Twisted78SS · 08-12-2011, 12:06 PM

I have a one only Chrome/black vent window for a 67, but until i get home I don't recall if it's driver side or not. But I do believe it is. I'll post up tonight what I have.

ETsC10 · 08-12-2011, 01:17 PM

If Drew doesn't have the correct side of vent windows, I've got a few to choose from as well.
I do have the door handle and hinge. I just dragged this stuff out of storage so I'll return to post
pics later today after I get them cleaned up a tad.

**STP67-72** · 08-12-2011, 01:52 PM

Thanks guys. These parts are for 67 ONLY.

ETsC10 · 08-12-2011, 03:56 PM

Here's the door handle and hinge.

EDIT: Hinge shown is not correct for 1967. See post #18
Jeepers...learn something new everyday!

Handle has tiny pits on top surface, latch works smoothly.
Hinge is fine. Asking $35 for both parts + shpg (9.37 USPS Priority)

Gunna wait on the vents until Drew responds yay or nay.

.

lynnfield · 08-13-2011, 06:55 AM

I am curious too. I have a pretty original 67 here, I'll look at it when I get home. Greg

Duncan and son · 08-13-2011, 10:10 AM

If they are different then you Can teach an old dog new tricks...learn something new everyday. Greg let us know what you find.

otsenre · 08-13-2011, 12:53 PM

I didnt know the handles are different! What is the difference?

Robert Paul Thomas · 08-13-2011, 01:27 PM

The pins are shorter on the backside of the button.

Livrat · 08-13-2011, 01:34 PM

Also the bolts that hold the handle to the door go straight in instead of at an angle, (the outside door handles are 67 only)

otsenre · 08-13-2011, 04:28 PM

One could still use the later year handles on a 67, right?

ETsC10 · 08-13-2011, 05:38 PM

Quote:

Originally Posted by otsenre

One could still use the later year handles on a 67, right?

No sir, they will not work. 1967 only.

**STP67-72** · 08-13-2011, 05:49 PM

The 67 only doors have a bracket welded in the inside. That makes the bolts go in straight and not at a angle. Also the doors have a dimple around the bolt area. The best i remember.

Got me curious what problem i had with my door hidge a couple years ago. I think it is the locking mechanism. If i get away from this OT, i will go look.
Steve

ETsC10 · 08-13-2011, 06:10 PM

As it turns out the hinges are different. The hinge I photo'd in post #6 matches a 1971 hinge.
The following pics are of the '71 hinge compared with a 1967 and a 1968.

Hook not the same, landing for hook when extended was flat on later hinges; earlier has a indentation.
Stop different profile. (1 & 3) Also, later model hinge has a step cast into one leg. (2)
Channel for stop is longer (by a tad) on the '71. (4) Machined hole for hook is WAY longer on the '67/'68's. (5)

**STP67-72** · 08-13-2011, 06:24 PM

Thanks for pictures. I couldnt remember what was a little different, but i new that i couldnt use the locking part on my 67. I was trying to save my patinaed white hidge. Im sure you can use the complete hidge off of a newer model. I had a 68 truck at time and the hidge part wouldnt work off of it. I had dozens of hidges off, but all were different.
Thanks

ETsC10 · 08-13-2011, 11:45 PM

Quote:

Originally Posted by lynnfield

This is what I found on the hinges also. Greg

Thanks for adding the pics...good ones and keepers!

Quote:

Originally Posted by STP67-72

Thanks for pictures. I couldnt remember what was a little different, but i new that i couldnt use the locking part on my 67. I was trying to save my patinaed white hidge. Im sure you can use the complete hidge off of a newer model. I had a 68 truck at time and the hidge part wouldnt work off of it. I had dozens of hidges off, but all were different.
Thanks

I feel your pain on that. I changed the door (with hinge) on a '68 years ago and had to bungee the door closed.
Never did fit and I didn't realize the '67-72 truck's hinges changed year to year until now.

With your fleet of trucks and some more input, we should be well on our way to a FAQ.
(Plus help for you're quest)

Mark (Livrat) & I pulled the '67 & '68 hinges today off of his stock doors so we believe the pics are correct per year.

One of the guys today (yes you, Gary) mentioned that some of the '67 hinges may have been leftovers
from the '66 trucks.
We may need some input (Pics!) from the pre-67 crowd here...the '67's may have been a mixed bag.

Any pics of yours for comparison?

I don't feel so bad now that I bead blasted the white patina off the '71 hinge.
..jess trying to make it look photo-pretty

If I find your white patina'd hinge...it won't be molested.

ET

.

lynnfield · 08-13-2011, 07:14 PM

This is what I found on the hinges also. Greg

08-12-2011, 11:42 AM	#2
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: 67 parts wanted ttt __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-12-2011, 12:06 PM	#3
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 67 parts wanted I have a one only Chrome/black vent window for a 67, but until i get home I don't recall if it's driver side or not. But I do believe it is. I'll post up tonight what I have. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

08-12-2011, 01:17 PM	#4
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: 67 parts wanted If Drew doesn't have the correct side of vent windows, I've got a few to choose from as well. I do have the door handle and hinge. I just dragged this stuff out of storage so I'll return to post pics later today after I get them cleaned up a tad.

08-12-2011, 01:52 PM	#5
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: 67 parts wanted Thanks guys. These parts are for 67 ONLY. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-13-2011, 06:55 AM	#7
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: 67 parts wanted I am curious too. I have a pretty original 67 here, I'll look at it when I get home. Greg

08-06-2011, 08:52 AM	#1
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	67 parts wanted I am looking for some 67 only vent windows, outer door handle and a upper door hinge. Im looking for a black and a chrome 67 only drivers side vent window assembly. Also a 67 only driver side outside door handle. Also a rebuildable upper driver side door hinge. Also looking for a 67-72 rear white only rear step bumper. ( patina would be great) __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-12-2011, 03:56 PM	#6
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: 67 parts wanted Here's the door handle and hinge. EDIT: Hinge shown is not correct for 1967. See post #18 Jeepers...learn something new everyday! Handle has tiny pits on top surface, latch works smoothly. Hinge is fine. Asking $35 for both parts + shpg (9.37 USPS Priority) Gunna wait on the vents until Drew responds yay or nay. . Attached Images Last edited by ETsC10; 08-13-2011 at 06:16 PM. Reason: calculated shipping

08-13-2011, 10:10 AM	#8
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: 67 parts wanted If they are different then you Can teach an old dog new tricks...learn something new everyday. Greg let us know what you find. __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

08-13-2011, 12:53 PM	#9
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 67 parts wanted I didnt know the handles are different! What is the difference?

08-13-2011, 01:27 PM	#10
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 67 parts wanted The pins are shorter on the backside of the button.

08-13-2011, 01:34 PM	#11
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 67 parts wanted Also the bolts that hold the handle to the door go straight in instead of at an angle, (the outside door handles are 67 only)

08-13-2011, 04:28 PM	#12
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 67 parts wanted One could still use the later year handles on a 67, right?

08-13-2011, 05:49 PM	#14
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: 67 parts wanted The 67 only doors have a bracket welded in the inside. That makes the bolts go in straight and not at a angle. Also the doors have a dimple around the bolt area. The best i remember. Got me curious what problem i had with my door hidge a couple years ago. I think it is the locking mechanism. If i get away from this OT, i will go look. Steve __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-13-2011, 06:10 PM	#15
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: 67 parts wanted As it turns out the hinges are different. The hinge I photo'd in post #6 matches a 1971 hinge. The following pics are of the '71 hinge compared with a 1967 and a 1968. Hook not the same, landing for hook when extended was flat on later hinges; earlier has a indentation. Stop different profile. (1 & 3) Also, later model hinge has a step cast into one leg. (2) Channel for stop is longer (by a tad) on the '71. (4) Machined hole for hook is WAY longer on the '67/'68's. (5) Attached Images

08-13-2011, 06:24 PM	#16
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: 67 parts wanted Thanks for pictures. I couldnt remember what was a little different, but i new that i couldnt use the locking part on my 67. I was trying to save my patinaed white hidge. Im sure you can use the complete hidge off of a newer model. I had a 68 truck at time and the hidge part wouldnt work off of it. I had dozens of hidges off, but all were different. Thanks __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer



Register or Log In To remove these advertisements.

08-13-2011, 07:14 PM	#18
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: 67 parts wanted This is what I found on the hinges also. Greg Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.