AAARRGH! CARQUEST! does anybody have a brake hose? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 04-09-2003, 05:11 PM

i ordered the brake hoses from carqust last week, one came in, one didnt, the parts guy called the copany that he ordered it from, and they said they didnt have any reordof it ever being ordered. grrrrrrrrr. truck has been sitting up for a week and a half. do any of the vendors on the board carry a pass side rake hose for a 71, the rubber part that goes from caliper to bracket, thanks, sean

>X< · 04-09-2003, 05:27 PM

ooh, found it, aparently the jackass at NAPA cnt read the computer, because i called the manager and he has it in his hand right now. thanks anyway, sean

cdowns · 04-09-2003, 05:40 PM

when i replaced my hoses on 2 different 71 2wd's i had nothing but problems with local parts stores the pass side was readily available the drivers side wasn't ended up getting them from lmc

minibike · 04-09-2003, 10:49 PM

Got mine from LMC...they were the lowest price on them, at the time.

04-09-2003, 05:11 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	AAARRGH! CARQUEST! does anybody have a brake hose? i ordered the brake hoses from carqust last week, one came in, one didnt, the parts guy called the copany that he ordered it from, and they said they didnt have any reordof it ever being ordered. grrrrrrrrr. truck has been sitting up for a week and a half. do any of the vendors on the board carry a pass side rake hose for a 71, the rubber part that goes from caliper to bracket, thanks, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-09-2003, 05:27 PM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	ooh, found it, aparently the jackass at NAPA cnt read the computer, because i called the manager and he has it in his hand right now. thanks anyway, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-09-2003, 05:40 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	when i replaced my hoses on 2 different 71 2wd's i had nothing but problems with local parts stores the pass side was readily available the drivers side wasn't ended up getting them from lmc __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-09-2003, 10:49 PM	#4
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	Got mine from LMC...they were the lowest price on them, at the time. __________________ 69 SWB LT1/4L60E www.classicplace.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.