Dynomat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

r0lf- · 04-12-2003, 02:11 PM

Has anybody Dynomatted (or a cheaper alternative) their truck? Im going to order about 70sq feet of sound deadening material (From www.b-quiet.com(Brownbread)). I was planning on the entire back wall from the bench down, the entire floor, what I can get of the firewall, and the doors.

Has anyone else done this yet? I need to get the rattling down from my stereo and I want to quiet out the drone from my turndown.

Im also going to re-weatherstrip the doors and everything to have a ultra-quiet cab.

CustomChevy · 04-12-2003, 03:23 PM

Dynamat is great stuff, pricey, but great. You will notice the difference, especially in the doors. Pretty much everywhere is good.

When you put it up, make sure you thoroughly clean the surfaces you are going to cover, better for adhesion.

Good luck!

Ol' Grey · 04-12-2003, 11:01 PM

If you want to shell out the extra cash for the foil-backed stuff, it works great on the firewall and floor to keep out heat.

ocbaud · 04-13-2003, 12:35 AM

dave(lohrtbt) has 2 layers of the stuff in his truck.

Blue Beard · 04-13-2003, 10:12 AM

How thick is this material, and how do you install it?

Ol' Grey · 04-13-2003, 01:22 PM

Quote:

Originally posted by Blue Beard
How thick is this material, and how do you install it?

http://www.dynamat.com/

You'll find the answer there.

Blue Beard · 04-13-2003, 09:29 PM

Thanks, Ol' Grey.............

J-Spec C10 · 04-13-2003, 10:05 PM

I hae brownbread & it works great, and is much cheaper than dynamat. there are many ways to apply it too. The most common and cost effective way is in 3" squares installed in a "checkerboard" pattern. I asked a world winning SPL champion, that was how he told me to do it.

gldevall · 04-13-2003, 10:35 PM

I've used the spray on liner and that worked really good. Bought mine from Crutchfield, I think it was made by Rockford Fosgate. I don't know if they still carry it, that was about 6 or 7 years ago.

r0lf- · 04-13-2003, 10:55 PM

Quote:

Originally posted by J-Spec C10
I hae brownbread & it works great, and is much cheaper than dynamat. there are many ways to apply it too. The most common and cost effective way is in 3" squares installed in a "checkerboard" pattern. I asked a world winning SPL champion, that was how he told me to do it.

Yup, thats the stuff im using on my ride. Buying about 80 sq feet of it.

LOHRTBT · 04-14-2003, 11:43 AM

Yeah....Dynamat is great....other stuff is much thinner and not as sticky.

Makes a big difference

CHEVY_FOREVER · 04-14-2003, 05:01 PM

How many feet would it take to do the whole cab (everything) and doors. Does it make it pretty quiet inside? I am sure it would have to make a big difference right?

Later,
MO

04-12-2003, 02:11 PM	#1
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Dynomat? Has anybody Dynomatted (or a cheaper alternative) their truck? Im going to order about 70sq feet of sound deadening material (From www.b-quiet.com(Brownbread)). I was planning on the entire back wall from the bench down, the entire floor, what I can get of the firewall, and the doors. Has anyone else done this yet? I need to get the rattling down from my stereo and I want to quiet out the drone from my turndown. Im also going to re-weatherstrip the doors and everything to have a ultra-quiet cab.

04-12-2003, 11:01 PM	#3
Ol' Grey A work in progress Join Date: Mar 2003 Location: Marion, NC Posts: 104	If you want to shell out the extra cash for the foil-backed stuff, it works great on the firewall and floor to keep out heat. __________________ Marc Cook 1986 Chevy Silverado C-10 LWB Gunmetal Grey Metallic 5.0L HO, 700-R4, '73 12-bolt rear Long tube headers, 2.5" dual exhaust dumped before the axle. 1988 GMC Sierra SLE 4WD 5.7L, 700-R4, stock everything 6000LB winch

04-13-2003, 10:12 AM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	How thick is this material, and how do you install it? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-13-2003, 09:29 PM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Thanks, Ol' Grey............. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-13-2003, 10:05 PM	#8
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	I hae brownbread & it works great, and is much cheaper than dynamat. there are many ways to apply it too. The most common and cost effective way is in 3" squares installed in a "checkerboard" pattern. I asked a world winning SPL champion, that was how he told me to do it. __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

04-12-2003, 03:23 PM	#2
CustomChevy Registered User Join Date: Nov 2002 Posts: 462	Dynamat is great stuff, pricey, but great. You will notice the difference, especially in the doors. Pretty much everywhere is good. When you put it up, make sure you thoroughly clean the surfaces you are going to cover, better for adhesion. Good luck!

04-13-2003, 12:35 AM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	dave(lohrtbt) has 2 layers of the stuff in his truck.

04-13-2003, 10:35 PM	#9
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I've used the spray on liner and that worked really good. Bought mine from Crutchfield, I think it was made by Rockford Fosgate. I don't know if they still carry it, that was about 6 or 7 years ago. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-14-2003, 11:43 AM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Yeah....Dynamat is great....other stuff is much thinner and not as sticky. Makes a big difference __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-14-2003, 05:01 PM	#12
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	How many feet would it take to do the whole cab (everything) and doors. Does it make it pretty quiet inside? I am sure it would have to make a big difference right? Later, MO

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.