The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-22-2011, 08:04 PM   #1
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Rear axle woes :(

The posi Dana 60 in my 71 C20 has pretty much bit the dust. The housing is messed up due to play in the gears. Took it to a shop and they said it is beyond economical repair. The problem I have been having is I cannot find another Dana 60 anywhere.

So I figure now is a time to look at some other options. I would love to have an axle that is posi or locking diff and perhaps rear discs. Anyone have any insight as to other economical options for a rear axle for my truck? Would an axle out of a newer GMC fit without too many problems?
crazymason is offline   Reply With Quote
Old 09-22-2011, 09:19 PM   #2
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: Rear axle woes :(

I have heard 14 bolts are the way to go. maybe someone with actual knowledge will chime in and assist ya.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 09-27-2011, 10:32 AM   #3
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Re: Rear axle woes :(

Thanks Clyde, I have also heard about the 14 bolt axles being a dime a dozen and good axles. I'm going to be on the hunt this week for an axle. Any other options or is the 14 bolt the best route?
crazymason is offline   Reply With Quote
Old 09-27-2011, 01:26 PM   #4
fastwillie 696969
~Rest In Peace~
 
fastwillie 696969's Avatar
 
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
Re: Rear axle woes :(

i would check with junkyards for old rv's alot of these rv had dana 60 rear ends ,just sayin
__________________
is it fast ? it has a lighting bolt donut?


B___H please, I can remove 90% of your so called "beauty" with a kleenex
fastwillie 696969 is offline   Reply With Quote
Old 09-27-2011, 04:05 PM   #5
pumpkin
Registered User
 
pumpkin's Avatar
 
Join Date: Apr 2006
Location: East Sooke B.C. Canada
Posts: 543
Re: Rear axle woes :(

Depending on what gear ratio you want, My choice is the eaton, with a detroit locker.
pumpkin is offline   Reply With Quote
Old 09-27-2011, 08:08 PM   #6
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Re: Rear axle woes :(

I think I will stick with the stock 4:10 gear ratio
Posted via Mobile Device
crazymason is offline   Reply With Quote
Old 09-28-2011, 06:20 AM   #7
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Rear axle woes :(

Is your truck leaf spring? 14-bolts only require the shock mounts and spring pads relocated. Is you posi wiped or just the ring & pinion due to worn carrier and pinion bearings?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 10-05-2011, 09:26 PM   #8
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Re: Rear axle woes :(

Been pretty busy, haven't kept up with the thread and still haven't found an axle yet.

Specialk, yes, my truck is leaf spring and the "banjo housing" has wear. My guess is the previous owner did some work on the gears and messed something up, the housing has abnormal wear and is now pretty much useless. I am kind of leaning towards an axle out of a 2000 and up 3/4 ton truck, especially if I have to relocate spring pads and shock mounts anyways. Disc brakes and a locking diff sound pretty good to me. Has anyone done this swap?
crazymason is offline   Reply With Quote
Old 10-05-2011, 09:56 PM   #9
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,305
Re: Rear axle woes :(

Quote:
Originally Posted by crazymason View Post
Been pretty busy, haven't kept up with the thread and still haven't found an axle yet.

Specialk, yes, my truck is leaf spring and the "banjo housing" has wear. My guess is the previous owner did some work on the gears and messed something up, the housing has abnormal wear and is now pretty much useless. I am kind of leaning towards an axle out of a 2000 and up 3/4 ton truck, especially if I have to relocate spring pads and shock mounts anyways. Disc brakes and a locking diff sound pretty good to me. Has anyone done this swap?
Not all 2000+ have posi/lockers and discs so check it out before you buy. I have both Dana 60 equipped and a 2001 2500HD 6.0 truck if you need measurements. The 2500HD has a heavier duty rear than the D60. The Dmax 2500HD's have an even heavier duty version!

Also, heard a rumor that kits may become available for converting Eaton's to discs.
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline   Reply With Quote
Old 10-05-2011, 11:16 PM   #10
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Re: Rear axle woes :(

If you have measurements from your 01, Vintage Windmills, that would for sure be helpful. I believe the D60 is 65 inches between where the wheels mount. What is a reasonable price to pay for a newer axle with locker/discs?
__________________
71 GMC C2500 350 all original, 80k miles, work truck
71 Chev C20 350 currently needs rear axle, play truck
Both baby blue from the factory
crazymason is offline   Reply With Quote
Old 10-07-2011, 01:23 AM   #11
05crewcab
Registered User
 
05crewcab's Avatar
 
Join Date: Mar 2010
Location: Minnetonka, MN
Posts: 409
Re: Rear axle woes :(

It's not a newer axle, but here is a D60 in Minneapolis for a price compare:

http://minneapolis.craigslist.org/ra...595894113.html

was looking on Craig's today and saw this ad. it is actually the rear from my parts truck I sold about a month ago....guess the guy I sold it to has been busy. if I had time i would have torn the truck down...kinda regretting it right now...

anyway, D60's are out there...just keep lookin. Good luck!
__________________
1971 C-20 350/350
05crewcab is offline   Reply With Quote
Old 10-07-2011, 04:01 AM   #12
JCD
Registered User
 
JCD's Avatar
 
Join Date: Sep 2010
Location: Los Angeles California
Posts: 352
Re: Rear axle woes :(

If you feel like a drive down the coast.. there's a few in the local Craigslist.. one's been on there forever..

http://losangeles.craigslist.org/wst...604260306.html

http://ventura.craigslist.org/pts/2602856043.html
__________________
1972 Custom Deluxe Highlander C20
1971 Javelin SST New Project
1971 Demon 340
1969 SS El Camino
1968 SS RS 396 Camaro
1967 Barracuda Formula S
1965 140/4sp Corvair Monza Convertible

Sorry, but I don't do Fords.
JCD is offline   Reply With Quote
Old 10-07-2011, 01:05 PM   #13
rollinhard
Registered User
 
rollinhard's Avatar
 
Join Date: Jun 2010
Location: British Columbia
Posts: 192
Re: Rear axle woes :(

Hey I've got a dana 60 out of a 71 gmc c-20 you can have just come pick it up. I'm up in Quesnel it's yours if you want it
Posted via Mobile Device
__________________
If you can't impress them with your inteligence, dazzle'm with your stupidity

1969 GMC lwb 2wheel drive can you say big stroker motor to come hehe
rollinhard is offline   Reply With Quote
Old 10-07-2011, 02:23 PM   #14
crazymason
Registered User
 
Join Date: Jul 2011
Location: Vancouver Island/Calgary
Posts: 22
Re: Rear axle woes :(

Rollinhard! You just made my day, I'll send you a message after work!
Posted via Mobile Device
__________________
71 GMC C2500 350 all original, 80k miles, work truck
71 Chev C20 350 currently needs rear axle, play truck
Both baby blue from the factory
crazymason is offline   Reply With Quote
Old 10-07-2011, 05:28 PM   #15
rollinhard
Registered User
 
rollinhard's Avatar
 
Join Date: Jun 2010
Location: British Columbia
Posts: 192
Re: Rear axle woes :(

No problem. I will go look at it tomorrow and confirm weather it is a posi and what gear ratio it is
Posted via Mobile Device
__________________
If you can't impress them with your inteligence, dazzle'm with your stupidity

1969 GMC lwb 2wheel drive can you say big stroker motor to come hehe
rollinhard is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com