Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-23-2011, 06:46 PM | #1 |
Registered User
Join Date: Sep 2011
Location: IL
Posts: 39
|
Vibration after Diff Fluid Change - Pls Help
Need some help please!
-86 Suburban k1500, 4x4 -Changed front and rear diff fluid - synthetic -Filled to just seeping from fill plug...let sit till done dripping out then secured plugs -drove and now have vibration...can't tell if from front/back as it is in both steering wheel and seat Did I overfill? If so what distance below the fill plug holes should it be? Thanks, e |
09-27-2011, 12:55 PM | #2 |
Registered User
Join Date: Sep 2011
Location: IL
Posts: 39
|
Re: Vibration after Diff Fluid Change - Pls Help
Anyone?
|
09-27-2011, 06:59 PM | #3 |
Registered User
Join Date: Sep 2011
Location: MAPLEWOOD
Posts: 58
|
Re: Vibration after Diff Fluid Change - Pls Help
Sounds like a drive shaft to me! I drive a 1986 GMC suburban and the rear drive shaft has a nice size dent in it towards the dif, and its causing the same type of vibration.
|
09-29-2011, 09:32 AM | #4 |
Registered User
Join Date: May 2010
Location: Easton, Pa
Posts: 7
|
Re: Vibration after Diff Fluid Change - Pls Help
I've always filled mine till it comes out the plug. Is it "whining" at all? Was the truck sitting level when you filled it? Pull the plug and stick your finger in, is it low? I did the same thing once and after driving a few miles I had a vibration and "whine" from the rear differential. I pulled the plug and I was low on fluid. I guess I didn't allow enough time for it to ooze everywhere it needed to. Topped her off and I was good to go. Other than that, check the ujoints for sure.
Posted via Mobile Device |
09-29-2011, 09:43 AM | #5 | |
Registered User
Join Date: Sep 2011
Location: IL
Posts: 39
|
Re: Vibration after Diff Fluid Change - Pls Help
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|