NC WTB Stock Steel 15x6, 6 lug wheels 4"BS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47thriftmaster · 10-02-2011, 05:39 PM

Looking to pick up 2 Stock Steels for my 72. Had five, but after blasting only 3 survived the cut. I need the face to by relatively good, no pitting, the backs are not as important. The wheels need to have 4" back spacing to match my other three, 3 1/2 will not work. Thank you for any and all help.

Here is a pic of one prior to blasting.

**Tim Christian** · 10-02-2011, 05:48 PM

I might have two with this truck I just bought. I will have to measure the back spacing.

47thriftmaster · 10-02-2011, 08:14 PM

Sounds good Tim, thanks

longbed67 · 10-02-2011, 08:30 PM

I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

47thriftmaster · 10-09-2011, 10:59 AM

How long would that be by chance? Tim any luck on the wheels? Still looking, thanks.

Quote:

Originally Posted by longbed67

I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

**68 Four on the Floor** · 10-09-2011, 11:05 AM

Ill check the backspacing on the ones i just pulled off my 69 frame. let ya know in an hour.

47thriftmaster · 10-09-2011, 11:29 AM

Sounds good

**68 Four on the Floor** · 10-09-2011, 02:47 PM

Well the ones i pulled off the rear are 3.5. Maybe fronts have more offset? Ill be pulling those later tonight. Ill let you know what they are.

**68 Four on the Floor** · 10-09-2011, 08:57 PM

Looks like all three of mine are 3.5s. Sorry best of luck finding some!

47thriftmaster · 10-10-2011, 06:41 PM

Thanks for checking. Yah, I hope it turns out.

Quote:

Originally Posted by 68 Four on the Floor

Looks like all three of mine are 3.5s. Sorry best of luck finding some!

bsw6767 · 10-09-2011, 08:59 PM

I have 3 that are 5" backspacing, sorry!

47thriftmaster · 10-10-2011, 06:42 PM

Not a problem, thanks for looking.

Quote:

Originally Posted by bsw6767

I have 3 that are 5" backspacing, sorry!

**Tim Christian** · 10-13-2011, 07:48 PM

Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

47thriftmaster · 10-14-2011, 07:14 PM

Thanks for getting back to me Tim, yah sometimes the wheels just don't turn out. I ended up with three out of five. Thanks again

Quote:

Originally Posted by Tim Christian

Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

*mrdana60* · 10-13-2011, 09:51 PM

i have 4 off a 69 with drum brakes. i ll try and check the backspacing tomorrow

47thriftmaster · 10-18-2011, 10:23 PM

Still looking for a pair of wheels, 15x6 6 lug with no pitting on the face. Thanks

47thriftmaster · 10-24-2011, 08:16 PM

Ttt

47thriftmaster · 10-27-2011, 10:06 AM

ttt, need some wheels

**michael bustamante** · 10-27-2011, 10:10 AM

I have 5 of them all solid no rust. Let me know if youre interested. 6 lug rims

47thriftmaster · 10-27-2011, 11:00 AM

Can you post pics of your best 2, front, back and inside? Also the valve stem area, had one bad in that area. I am interested, would also need total for 2 shipped to 28327. Thank you for the help.

47thriftmaster · 10-29-2011, 10:05 AM

Still looking, need 2 with 4" back spacing. Thanks

47thriftmaster · 10-30-2011, 11:51 AM

Sunday Bump

CrewCab59 · 10-31-2011, 09:35 AM

I have some .

http://67-72chevytrucks.com/vboard/s...d.php?t=476651

69Beauty · 10-31-2011, 12:39 PM

Just got a pair of them i will have to look at backspacing when i get home. now tht i think about it they might be 5.5 and not 6's will that effect your decision?

47thriftmaster · 11-01-2011, 10:13 PM

I saw your thread but was not looking for 15x8 wheels, so never asked. Let me know if you have 15x6 6 lug wheels with 4" back spacing. Would be going to 28327. Thank you.

Quote:

Originally Posted by CrewCab59

I have some .

http://67-72chevytrucks.com/vboard/s...d.php?t=476651

10-02-2011, 05:39 PM	#1
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	WTB Stock Steel 15x6, 6 lug wheels 4"BS Looking to pick up 2 Stock Steels for my 72. Had five, but after blasting only 3 survived the cut. I need the face to by relatively good, no pitting, the backs are not as important. The wheels need to have 4" back spacing to match my other three, 3 1/2 will not work. Thank you for any and all help. Here is a pic of one prior to blasting.

10-02-2011, 05:48 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I might have two with this truck I just bought. I will have to measure the back spacing.

10-02-2011, 08:14 PM	#3
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sounds good Tim, thanks

10-02-2011, 08:30 PM	#4
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 5 of them but have to wait till I get my 5x5 setup to switch rims...

10-09-2011, 11:05 AM	#6
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Ill check the backspacing on the ones i just pulled off my 69 frame. let ya know in an hour.

10-09-2011, 11:29 AM	#7
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sounds good

10-09-2011, 02:47 PM	#8
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Well the ones i pulled off the rear are 3.5. Maybe fronts have more offset? Ill be pulling those later tonight. Ill let you know what they are.

10-09-2011, 08:57 PM	#9
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Looks like all three of mine are 3.5s. Sorry best of luck finding some!

10-09-2011, 08:59 PM	#11
bsw6767 Registered User Join Date: Sep 2008 Location: Williamstown, Kentucky Posts: 132	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 3 that are 5" backspacing, sorry!

10-13-2011, 07:48 PM	#13
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sorry I am so slow they ended up being so rusty I did not even measure. Sorry Tim

10-13-2011, 09:51 PM	#15
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS i have 4 off a 69 with drum brakes. i ll try and check the backspacing tomorrow

10-18-2011, 10:23 PM	#16
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Still looking for a pair of wheels, 15x6 6 lug with no pitting on the face. Thanks

10-24-2011, 08:16 PM	#17
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Ttt

10-27-2011, 10:06 AM	#18
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS ttt, need some wheels

10-27-2011, 10:10 AM	#19
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have 5 of them all solid no rust. Let me know if youre interested. 6 lug rims __________________ 1967custom



Register or Log In To remove these advertisements.

10-27-2011, 11:00 AM	#20
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Can you post pics of your best 2, front, back and inside? Also the valve stem area, had one bad in that area. I am interested, would also need total for 2 shipped to 28327. Thank you for the help.

10-29-2011, 10:05 AM	#21
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Still looking, need 2 with 4" back spacing. Thanks

10-30-2011, 11:51 AM	#22
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Sunday Bump

10-31-2011, 09:35 AM	#23
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS I have some . http://67-72chevytrucks.com/vboard/s...d.php?t=476651 __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

10-31-2011, 12:39 PM	#24
69Beauty Registered User Join Date: Aug 2010 Location: North Dakota Posts: 279	Re: WTB Stock Steel 15x6, 6 lug wheels 4"BS Just got a pair of them i will have to look at backspacing when i get home. now tht i think about it they might be 5.5 and not 6's will that effect your decision? __________________ 1969 C-10 LWB 388 SBC Vortec Heads 10:1 Lunati 60103 cam Weiand intake Quadrajet Carb 12 Bolt 3:73 posi 700r4 Hedman Headers 1998 Dodge Ram 1500 Reg. Cab Long Box 4X4 5.9L 183k miles 1956 Ford F-100 Longbed with Original 272 and 3OTT 1995 C1500 ECSB 6.5 Diesel 4l80e (Camper puller) 1997 Dodge 3/4 ECLB V10 (MPG machine)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.