|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-10-2011, 05:57 PM
|
#1 |
|
Registered User
Join Date: Mar 2011
Location: Stevensville, Mt
Posts: 5
|
steering wheel assembly for 1971 Chev pickup.
I have a restored 1971 1/2 ton Cheyenne, 2wd, four speed on the floor , tilt steering. The guy who built the truck put a GRANT steering wheel in it. classicparts.com says there was a deluxe and a standard steering wheel available for these trucks. He sells a standard wheel, but no mounting kit and says no one makes them yet. so, is there two steering wheels that came on this truck, and does anyone know where to get a NOS or reproduction steering wheel, horn button and its mounting kit also ? LMC has NO tech support, and did not know anything about what they sell. classicparts.com was $75 cheaper on the steering wheel which is nice, but can't supply the mounting kit as mentioned. Who has what I need ?
|
|
|
|
10-10-2011, 09:24 PM
|
#2 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,280
|
Re: steering wheel assembly for 1971 Chev pickup.
If you buy a replacement type wheel for your truck the hub will be made into the wheel so no need for a "kit"
|
|
|
|
|
10-10-2011, 09:55 PM
|
#3 |
|
Registered User
Join Date: Mar 2011
Location: Stevensville, Mt
Posts: 5
|
Re: steering wheel assembly for 1971 Chev pickup.
do you know if there was a standard and a deluxe steering wheel made in 1971 ?
|
|
|
|
|
10-11-2011, 01:33 AM
|
#4 |
|
Senior Member
Join Date: Sep 2004
Location: Wakaw, Sask, Canada
Posts: 3,180
|
Re: steering wheel assembly for 1971 Chev pickup.
To my knowledge there was just one type of wheel, the big bus sized 2 spoke.
__________________
"You can take the man out of PA, but you can't take PA out of the man" |
|
|
|
|
10-11-2011, 06:26 AM
|
#5 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: steering wheel assembly for 1971 Chev pickup.
One one steering wheel ever came in the 69-72 and that was the pickup sized wheel. Buses and other medium duties used the 67/68 style in a slightly larger diameter.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
10-11-2011, 09:31 AM
|
#6 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: steering wheel assembly for 1971 Chev pickup.
67/68 had a 3 spoke wheel
69 - 72 had a 2 spoke wheel. Other than color, they were all the same, no options. The closest to an optional wheel was the 67/68 had a fancy horn button on the CST trucks. |
|
|
|
|
10-11-2011, 07:55 PM
|
#7 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: steering wheel assembly for 1971 Chev pickup.
If you have power steering, my personal preference is for a 67-69 Camaro Comfort Grip wheel. They are smaller than diameter than the truck wheel, and IMO, look better than the two bar wheel. Get one for a 67-68 car as the wheel adapter is closer to the truck column diameter than the 69 which is a little larger because of the steering lock mechanism.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
