sound and heat insulation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alex Hayley · 04-16-2003, 10:47 AM

Question for people who have installed products such as Dynamat. When you install it, how "stuck" is it to the floor? Can I "unstick" it, do some work, for example, on that area and stick it back down?

dmurphy68 · 04-16-2003, 11:42 AM

once unstuck you can not use it again. Ihad some down and tried to pull it up and it left the sticky stuff all over. just my $.02
Darren

MandarinSixSeven · 04-16-2003, 12:10 PM

Ok since we are on this topic, what is the best bang for your buck, as far as sound deadening material goes? Also where to get it? Canadian retailers would be preferred

Because I want to do some sound deadening, but I don't know where to start. I know there is Dynamat, but what are some other options, possibly cheaper ones?

Alex Hayley · 04-16-2003, 01:03 PM

MandarinSixSeven, I know there is a company or two in Saskatchewan. I have a sample of their products at home. I will try to remember to get the contact info for you. Alternatively, Carolina Classic Trucks Inc. has a great deal on Dynamat. Check this link.

http://67-72chevytrucks.com/vboard/s...threadid=48397

Canada20 · 04-16-2003, 05:45 PM

www.sounddeadeningmaterial.com

They're in Sask and great to deal with( I just love typing out their name) I bought a roll of their product awhile back and I'm probably going to use it in my <cough> Honda<cough> this summer and maybe put some Brown Bread or Dynamat over top. I think Visions or Future Shop sells Brown Bread in relatively small sheets so you can check it out.

Also I found a place;
http://www.b-quiet.com./

that has good info on products AND they'll send you a piece of paper with various samples taped to it so you can see the differences. Well worth the couple of bucks they ask IMHO AND they're a Canajun company.

Hope that helps a little

Greg

Alex Hayley · 04-16-2003, 08:02 PM

Canada20 sent the info I was going to look for...thanks...

FILICE72C10 · 04-16-2003, 09:16 PM

www.thezeb.com free shipping and no tax

04-16-2003, 10:47 AM	#1
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	sound and heat insulation Question for people who have installed products such as Dynamat. When you install it, how "stuck" is it to the floor? Can I "unstick" it, do some work, for example, on that area and stick it back down?

04-16-2003, 11:42 AM	#2
dmurphy68 Registered User Join Date: Nov 2002 Location: Middletown ohio Posts: 1,058	once unstuck you can not use it again. Ihad some down and tried to pull it up and it left the sticky stuff all over. just my $.02 Darren __________________ The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. - George Washington No free man shall be debarred the use of arms - Thomas Jefferson Later Darren http://www.myspace.com/dmurphy68

04-16-2003, 12:10 PM	#3
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Ok since we are on this topic, what is the best bang for your buck, as far as sound deadening material goes? Also where to get it? Canadian retailers would be preferred Because I want to do some sound deadening, but I don't know where to start. I know there is Dynamat, but what are some other options, possibly cheaper ones? __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

04-16-2003, 05:45 PM	#5
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	www.sounddeadeningmaterial.com They're in Sask and great to deal with( I just love typing out their name) I bought a roll of their product awhile back and I'm probably going to use it in my <cough> Honda<cough> this summer and maybe put some Brown Bread or Dynamat over top. I think Visions or Future Shop sells Brown Bread in relatively small sheets so you can check it out. Also I found a place; http://www.b-quiet.com./ that has good info on products AND they'll send you a piece of paper with various samples taped to it so you can see the differences. Well worth the couple of bucks they ask IMHO AND they're a Canajun company. Hope that helps a little Greg __________________ No such thing as a stupid question, right?

04-16-2003, 09:16 PM	#7
FILICE72C10 Registered User Join Date: Dec 2002 Location: San Francisco, CA Posts: 270	www.thezeb.com free shipping and no tax __________________ 72 C10 SWB 02 Subaru WRX 95 Nissan 240SX

04-16-2003, 01:03 PM	#4
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	MandarinSixSeven, I know there is a company or two in Saskatchewan. I have a sample of their products at home. I will try to remember to get the contact info for you. Alternatively, Carolina Classic Trucks Inc. has a great deal on Dynamat. Check this link. http://67-72chevytrucks.com/vboard/s...threadid=48397

04-16-2003, 08:02 PM	#6
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Canada20 sent the info I was going to look for...thanks...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.