![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2003
Location: Iowa
Posts: 974
|
what about the gauges
on the back of the temp, gasand ammeter gauge do the wires just plug in? how do u get them out. how do you unhook the tail light wires from the fire wall.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2003
Location: Stillwater MN
Posts: 1,166
|
Gauge harness unplugs..depress a release tab on the plug. Tail light harness pulls out of fuse block under hood AFTER you remove the center bolt. If bolt doesn't volunteer to come out, tap on it meaningfully, but not too hard...should break the the 33 year seal loose enough to turn out.
__________________
69 GMC K10 ..some restoration required....still.. ![]() |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
The tail light harness plugs into the fire wall...just tug on it and it'll unplug.
|
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Looking at the tail light harness again, you have to pry it out a little, has a built in grommet so-to-speak. Once you pop it out of the firewall, you can unplug it.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2003
Location: Iowa
Posts: 974
|
thinks for the input
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|