![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2007
Location: Acton
Posts: 158
|
Ignition Switch Problems
Im having trouble put the ignition lock and the retainer bezels in place on the dash
Its a 67 and all the parts i buy either say late or early 67, anyone know how its goes in or if im missing any parts? The one on the left is the spacer, the bigger retainer bezel if supposedly for late 67 and 68 on, and the smaller retainer bezel is supposedly for early 67. Am i missing something? ![]() ![]() ![]()
__________________
1967 C10 Long Bed, Soon to have a 350 1997 Chevy 2500 454 BB |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2007
Location: Acton
Posts: 158
|
Re: Ignition Switch Problems
Does anyone have pictures of their 67 and how this screws on, if i screw the nut on, there is nothing to catch the ignition switch and it loosley hangs there
__________________
1967 C10 Long Bed, Soon to have a 350 1997 Chevy 2500 454 BB |
![]() |
![]() |
![]() |
#3 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: Ignition Switch Problems
-
That is a '68 up dash in your picture not a '67 so you would need to use the switch, the large spacer, and the large bezel. All '67's and a few of the early '68's used the small spacer and bezel. You do not have a small spacer in your picture and they are not reproduced... Here is a '67 dash. Look at the size of the ignition hole and the lighter hole (no depression on the '67 lighter hole) http://67-72chevytrucks.com/vboard/s...d.php?t=500277 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-28-2011 at 10:20 PM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2007
Location: Acton
Posts: 158
|
Re: Ignition Switch Problems
the holes in my dash seem to be the exact same size with the exact grooves... the larger retainer nut does not fit in the hole and the spacer makes it harder to reach
__________________
1967 C10 Long Bed, Soon to have a 350 1997 Chevy 2500 454 BB |
![]() |
![]() |
![]() |
#5 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: Ignition Switch Problems
Quote:
Maybe the close up picture just makes it look like the large hole. If it is the small hole you will need the '67 only spacer and small bezel and like I said the small spacer is not reproduced. You will have to try and find one on the parts board. Sorry for the confusion on my part.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2007
Location: Acton
Posts: 158
|
Re: Ignition Switch Problems
yea i just began my search for the spacer, wish me luck
__________________
1967 C10 Long Bed, Soon to have a 350 1997 Chevy 2500 454 BB |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|