![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2011
Location: Sweet, ID
Posts: 157
|
Pilot Bearing removal
What ticks do you have for removing a stubborn pilot bearing?
|
![]() |
![]() |
![]() |
#2 |
Moderator
![]() Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,957
|
Re: Pilot Bearing removal
Fill the cavity with grease. Slide a dowel in that fits the ID and whack it with a hammer.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2011
Location: Sweet, ID
Posts: 157
|
Re: Pilot Bearing removal
Ahhh, I'm pick it up what your putting down. Any need to heat it first?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2009
Location: Fort Worth, Tx
Posts: 62
|
Re: Pilot Bearing removal
is it an actual bearing, or just a bushing? parts stores rent slide hammers with a busing removal attachment. you slide the arms in the bushing, tighten the nut to expand them, then slide hammer it right out. the grease method works too, but its more messy and takes longer.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2011
Location: Sweet, ID
Posts: 157
|
Re: Pilot Bearing removal
Your right, it is a bushing. Not sure why it is listed as a "bearing".
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2009
Location: Oroville, CA
Posts: 4,827
|
Re: Pilot Bearing removal
The grease trick works great.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2010
Location: sioux city, iowa
Posts: 619
|
Re: Pilot Bearing removal
Yes the grease thing works great.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2011
Location: rock springs wyoming
Posts: 182
|
Re: Pilot Bearing removal
i use a tap thats the same size as the hole and comes out really easy and fast. and its a lot cleaner then Grease and easier. ive been useing it for about 10yrs and never had a problem with it.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|