![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
![]()
Anyone have duals running straight back off headers? If so where are you running your E-brake cables? Pictures would be great if you have them.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2011
Location: Macomb Illinois
Posts: 97
|
Re: E-Brake Cable with dual exhausts
Im running duals off of long tube headers on my 84. Where are you needing the pictures? Of the whole travel of the lines or just under the cab?
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2009
Location: S.C.
Posts: 1,593
|
Re: E-Brake Cable with dual exhausts
I don't have pics, but my 73 had duals off of headers. Pipes kicked up enough to allow e-brake cable room.
__________________
'86 C-30 dually, 454/tbh400 '73 K-20 350/350/205 (sold ![]() I'm kinda like duct tape- no real purpose, but handy to have around. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
Re: E-Brake Cable with dual exhausts
the only issue is where the front cable goes, Is it under or over the exhaust are you using the original attachment point on the frame?
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2009
Location: S.C.
Posts: 1,593
|
Re: E-Brake Cable with dual exhausts
On mine, the e-brake was in the stock location. Exhaust ran over the cable.
'73 K-20.
__________________
'86 C-30 dually, 454/tbh400 '73 K-20 350/350/205 (sold ![]() I'm kinda like duct tape- no real purpose, but handy to have around. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2011
Location: Houston, Tx
Posts: 159
|
Re: E-Brake Cable with dual exhausts
76 with long tube and dualed straight back.
I have my tubes run under the cable. no pics either. It did take some playing around to get it all right. HAve to find a compromise for the tube routing and the cables. Take as much slack as u can out of the calbes so they are not dragging on the tubes. Drive shaft also gets in the way. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
|
Re: E-Brake Cable with dual exhausts
http://www.lmctruck.com/icatalog/cc/t.aspx?Page=166
You can convert to the 84-87 brake cables that run under the left hand frame rail.
__________________
John 82 Chevy Silverado 350ci/TH350 ![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2010
Location: San Diego, CA
Posts: 281
|
Re: E-Brake Cable with dual exhausts
Ok same topic different question. I need to replace the front cable of the Ebrake system of cables. I have an 87 cab that Im putting on my 77 frame so which cable should I get from LMC (See Diagram)
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
|
Re: E-Brake Cable with dual exhausts
Possibly 34-3821, if the rest of your e-brake system is 77.
__________________
John 82 Chevy Silverado 350ci/TH350 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|