door latch assembly

[snj8198]

hi guys,

does anybody have an exploded diagram of a door latch assembly. Basically if I could get a whole inner door diagram that would be great. It's time to rebuild so I can open the door and stop my remakes of the Dukes of Hazard.

thanks

steve

[dfwright]

Here's a free bump, just because that made me laugh out loud!

[snj8198]

you wouldn't be laughing if you seen the pictures

[dcasalena]

Have you checked out the LMC catalog page 16?
Here it is:
LMC page 16

[snj8198]

Originally Posted by dcasalena

Have you checked out the LMC catalog page 16?
Here it is:
LMC page 16

yes sir that's what I was looking at too, it's the best I've found so far.

thanks.

[jtp67-72]

Originally Posted by snj8198

yes sir that's what I was looking at too, it's the best I've found so far.

thanks.

If u need a good used one let me know and i will send u one--call it Christmas come "lately"............jim

[snj8198]

Originally Posted by jtp67-72

If u need a good used one let me know and i will send u one--call it Christmas come "lately"............jim

Well thank you very much Jim. Both the inner and outer handles are worn out on my driver's door. The inner handle rotates around very loosely on the latch control and the outer button doesn't pop back out when depressed. I have to use my knife or a screw driver to pop it back out. I will tear the door apart tomorrow and see what the wear looks like on everything else. I may replace it all, just have to see.

Not sure what borders on the rules here but if it sounds like you have the parts I may need I will happily take you up on your offer. PM me the details.

Thank you sir.

If you're doing it on the truck in your avatar, that would be something to see!

No it wouldn't! We'd quickly lose our PG rating.

[dfwright]

If you're doing it on the truck in your avatar, that would be something to see!

[dfwright]

Here's a link to an article in Custom Classic trucks magazine that has lots of pictures in it of working on a door. It might help some.

Chevrolet C10 Door Secrets

[gcburdic]

Steve...In addition to these great responses, now would be a good time to pick up a factory assembly manual to help you out...They do offer it in a CD format that's searchable (cuz those of us who have one know how disorganized it is!!!)

[eurospec1]

Originally Posted by gcburdic

Steve...In addition to these great responses, now would be a good time to pick up a factory assembly manual to help you out...They do offer it in a CD format that's searchable (cuz those of us who have one know how disorganized it is!!!)

Where do you purchase these?

[RenoKeene]

Most big parts suppliers have them, here is one
http://www.classicheartbeat.com/cata...y%20Manual.htm

[artctp]

Steve, it looks like you have some good responses. If that does not help, there was an article in Classic Trucks a few years ago that had a very good step by step guide for rebuilding 67-72 doors, complete with pictures of each step. If you need it, I can look up what year and month it was, and you can see how far they go back in their archives.

[snj8198]

gcburdic
Re: door latch assembly
Steve...In addition to these great responses, now would be a good time to pick up a factory assembly manual to help you out...They do offer it in a CD format that's searchable (cuz those of us who have one know how disorganized it is!!!)

Yep I keep my scrubby Chilton directly under my bible so I can prey(beg) for patience before each project. Mine covers 1970-79. Why they printed these across the body change years is beyond me. So naturally the only 2 pics they show of the exploded handle mechanisms are for the square body. No matter, it shouldn't be that tough to pull apart and eyeball what I need. I've always wanted a dvd how-to manual. Why get my book greasy when I can get the wife's remote greasy! Nothing like moving up. I'm sure I can google it but if you have a readily available link toss it up sir. Much appreciated.

artctp
Re: door latch assembly
Steve, it looks like you have some good responses. If that does not help, there was an article in Classic Trucks a few years ago that had a very good step by step guide for rebuilding 67-72 doors, complete with pictures of each step. If you need it, I can look up what year and month it was, and you can see how far they go back in their archives.

That would be great! Please do if it don't put you out too much.

Thank you much guys. I'll pull that inner door skin about noonish.

[gcburdic]

that's the one I was talking about....those Chilton manuals aren't the best

[snj8198]

Ok it's apart and im eyes on. Looks like i need a door latch control and the actuator spring that goes behind the button on the outside door handle.

RenoKeene
Re: door latch assembly
Most big parts suppliers have them, here is one
http://www.classicheartbeat.com/cata...y%20Manual.htm
Today 11:26 AM

Thanks Reno, I'll look into one of these. I think I would like a dvd copy too so I'll search around for that as well.

[jtp67-72]

I'll send em Monday..............U got snow on the ground???..............jim

[snj8198]

Thank you.

There is snow in the upper elevations but I'm at 3,000 feel here in Kalispell, no snow down low. It has been a very warm winter so far. Supposed to get a few inches next week.