Rally wheel find ????

[jrisch]

I just found these wheels, and not sure what they are worth. I was wondering if anyone had an opinion if they were worth 150.00 for the set?? I have not seen them personally yet but he said they are in perfect shape! They are 15X8 6 lug and he thinks they are just painted not powder coated, which will make it easier to change the color!!

[61_FL_Apache]

It doesnt sound too bad. You have all the caps and rings. Im looking for a set like that too.

[Clyde65]

They are Definitely worth every penny he is asking. around here ( if you can find the 6 luggers) they will be $2-300 a set and probably not get the centers or trim rings for that. New centers are $50 each and trim rings will run you around $150+, so keep this in mind.

[kpc01]

Originally Posted by Clyde65

They are Definitely worth every penny he is asking. around here ( if you can find the 6 luggers) they will be $2-300 a set and probably not get the centers or trim rings for that. New centers are $50 each and trim rings will run you around $150+, so keep this in mind.

Nice....It looks like my set is similar. I'm wanting new wheels but don't have the $$. may push me to get mine cleaned up and listed. may give me the difference in cash I need! (atleast I think they are the same?)

[MisterC]

x2 what Clyde said. If that's what you're looking for, snatch them up and count your blessings.

[Slow Build]

Sound like a good price.
Noticed it has 2 old style and 2 new style caps (Dah, 4x4 fronts). Does it come with a full set of either or both?

[jrisch]

Originally Posted by Slow Build

Sound like a good price.
Noticed it has 2 old style and 2 new style caps. Does it come with a full set of either or both?

He had them on a 4X4 but he has all the caps to match

[padresag]

I was going to ask $300.00 for the 4 of these on the local c/l and thought perhaps I would have a hard time getting that for them

By rondavid at 2012-03-02
ron

[Captainfab]

That's about the going price for the 6 lug rally's around here. Those appear to have the nice 3" wide stainless trim rings.

[ChiefRocka]

I have same ones .... 70s/80s 4x4 truck/blazer/burb wheels is all they are


Posted via Mobile Device

[padresag]

Originally Posted by Captainfab

That's about the going price for the 6 lug rally's around here. Those appear to have the nice 3" wide stainless trim rings.

that's with tires also
ron

[jocko]

6 luggers not as common as 5 lug rallies. Those are easily worth $150, don't wait too long or they'll be gone. $300+ is what I'd expect to pay, without tires, and possibly even without caps/rings. You have a very good deal there, go for it.

[FAT TONY]

I think i have the same ones, my center caps all say 4x4 but its not, ive been having trouble my self finding some center caps 6 lug that have a chevy emblem

[Slow Build]

Originally Posted by FAT TONY

I think i have the same ones, my center caps all say 4x4 but its not, ive been having trouble my self finding some center caps 6 lug that have a chevy emblem

You can buy Chevy emblem stickers and just place them over the 4x4 emblems. There are a few different size cap stickers so make sure you get the right size if you go that route.

[FAT TONY]

Originally Posted by Slow Build

You can buy Chevy emblem stickers and just place them over the 4x4 emblems. There are a few different size cap stickers so make sure you get the right size if you go that route.

I might just do that, rite now i have some aluminum saw-blade wheels , but hopefully when i get the truck painted ill put the rallys with some white walls...... i really like these rally wheels because you can just paint them to match the color of the truck and it gives it a good look

[fasteddie1964]

Originally Posted by FAT TONY

I think i have the same ones, my center caps all say 4x4 but its not, ive been having trouble my self finding some center caps 6 lug that have a chevy emblem

I bought some years ago at Chevy dealer, they were bigger in diameter, but same thin aluminum as 4x4 emblems. I used 4x4 as pattern and trimmed them down for a perfect fit. They looked so good someone left my Chevy on blocks.
I hate a thief!

[corvettejim1968]

http://myworld.ebay.com/markzpartz center cap guy

http://myworld.ebay.com/nationwidehubcaps trim ring guy

http://myworld.ebay.com/carnutz67304 nos rims guy

[100%Chevy]

Those bolts for the center caps are 5/16 x coarse self-tapping.
Original wheels only have 3 of the holes used,so the other 3 shouldn't have threads.
After being removed/re-installed several times the threads will strip.
Mike.

[FAT TONY]

Originally Posted by 100%Chevy

Those bolts for the center caps are 5/16 x coarse self-tapping.
Original wheels only have 3 of the holes used,so the other 3 shouldn't have threads.
After being removed/re-installed several times the threads will strip.
Mike.

well i did notice that but those holes look smaller compared to the ones with bolts in them so do i just make a thread on them?

[FAT TONY]

Originally Posted by fasteddie1964

I bought some years ago at Chevy dealer, they were bigger in diameter, but same thin aluminum as 4x4 emblems. I used 4x4 as pattern and trimmed them down for a perfect fit. They looked so good someone left my Chevy on blocks.
I hate a thief!

that works to i might do that if i dont get the rite size, nd man that had to suck, i would hate to go outside one day nd see my truck on blocks

[jocko]

here's a guy that sells stickers: http://www.webxtremes.com/chevycentercapdecals.htm

Note, there is also a guy that sells them on the for sale section of this site.

I have original metal ones that are pretty pitted, bought a cheapie set of plastic replacements for driving duty and have to be honest, I love em. They look EXACTLY like the metal ones, they fit tight, and if someone steals em, I won't lose any sleep.

http://www.ebay.com/itm/CHEVY-GMC-4X...sories&vxp=mtr



One tip - regardless of the route you go, CALL the seller on the phone first - there are "copyright infringement" "issues" with the yellow, correct looking stickers (that's why they are so hard to find, kinda pisses me of that the General is hosing us this way - they're old, let them be copied for Pete's sake...) - so they don't normally advertise them (that's why you see red ones and blue ones, etc) - but that does not mean they don't have any in the back room

[corvettejim1968]

i bought my rims off eBay new old stock from 1979 15x8 for $199.99 then i got stainless steel 3in rings new reproduction from eBay $66.00 and the center caps off eBay also new reproduction for $60.00

[FAT TONY]

im not sure but i think mine are the plastic ones , still pretty good though, and thanks i just saved the website to favorites so i can check them out later on, one question on these rally wheels i got ive noticed that most of the bolts to hold down the center caps are all different sizes what should i do in that case?, is it safe to take a tap to it and make all the holes the same?

heres a picture of my truck with the rallys and some home made white walls

[jocko]

[QUOTE=FAT TONY;5228181]im not sure but i think mine are the plastic ones , still pretty good though, and thanks i just saved the website to favorites so i can check them out later on, one question on these rally wheels i got ive noticed that most of the bolts to hold down the center caps are all different sizes what should i do in that case?, is it safe to take a tap to it and make all the holes the same?


might want to double check, but I'd bet that the wheels still have the same threads, but someone somewhere along the way just grabbed whatever bolt to fit - so they look different - and all you'd need is a set of the mounting bolts for the caps. If the THREADS in the wheels are all different, then you can re-tap if they have not been opened up too much, otherwise, hmmm, gonna have to think about that one....

[FAT TONY]

[quote=jocko;5228206]

Originally Posted by FAT TONY

im not sure but i think mine are the plastic ones , still pretty good though, and thanks i just saved the website to favorites so i can check them out later on, one question on these rally wheels i got ive noticed that most of the bolts to hold down the center caps are all different sizes what should i do in that case?, is it safe to take a tap to it and make all the holes the same?


might want to double check, but I'd bet that the wheels still have the same threads, but someone somewhere along the way just grabbed whatever bolt to fit - so they look different - and all you'd need is a set of the mounting bolts for the caps. If the THREADS in the wheels are all different, then you can re-tap if they have not been opened up too much, otherwise, hmmm, gonna have to think about that one....

well when i removed them i saw that some of them had the thread messed up , i never could get two of the same bolts on them things, the previous owner had some of the hub caps in a box that he gave me with the truck, i have a total of five rallys and five hubcaps, but only four trims