TX Some Leftover Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevinc · 03-04-2012, 09:58 AM

I have some parts that are cluttering up my garage that are leftover from a 1965 parts truck. I also have a few 63 parts in here also. All prices are best offer plus shipping. SOME STUFF STILL HERE THAT I NEED TO GET RID OF. PLEASE MAKE AN OFFER!

Inner door panels pair - $20
Not sure what kind of mirrors - $5
Motor mount stands - $15
Tail light housings and bezels - $10 - SOLD
Cowl Extension panels pair- $20 - SOLD
Upper radiator support bracket each - $5
Hood latches Each- $5
Wiper cowl cover - $15
Wiper transmission - $15
Hood hinges pair - $15
Hood hinges with springs - $20
Front bumper brackets - $30 - SOLD
Ash tray - $5
Under dash bracket - $5
Radiator top panels pair - $10 - One pair left.

kevinc · 03-04-2012, 10:05 AM

1965 Glove box door - $10
1965 Ash tray - $5
Headlight Buckets pair - $15

Grille support - Top rail piece is damaged. Looks like a tree fell on it, but the bottom rail and panels behind the headlights are good. Was going to bring it to the metal recycler, but just don't have the heart to do it. Hopefully someone can cut off the top rail and reuse the rest. If it doesn't sell, then its going to the recycler - $10 - SOLD

kevinc · 03-04-2012, 10:11 AM

1965 Deluxe seat - Can you say filthy? Foam cushion and cover for the bottom are bad. Bottom springs, frame and seat adjuster tracks are in very good usable condition. The back cover is dirty, but may be cleaned. No rips or tears. The foam appears good, but dirty. The back frame is good, but several of the springs were cut out for some unknown reason. Local pickup only. $25 - SOLD

kevinc · 03-04-2012, 10:15 AM

1963 Grille Support - Excellent condition. Very straight, no rust thru, original condition with no bondo. Body lines are straight and intact. Light surface rust on the back side. Front has some weird flat brown paint on it. No dents or damage. - $135 - REDUCED TO $100 OBO

trevrolet65 · 03-04-2012, 10:31 AM

Might be interested in the seat next week. Have any auto steering columns?

duallyjams · 03-04-2012, 01:33 PM

Can you do 35 shipped for the front bumper brackets if so pm me payment info.

kevinc · 03-04-2012, 03:37 PM

trevrolet65 - I do have an auto column, but I'm using it. I do have a "3 on the tree" column that I would be interested in selling, but I haven't removed it yet. Please let me know when you would like to come out for the seat.

duallyjams - Sold to you for $35 shipped pending Payment. Please check your inbox.

Hardrockz28 · 03-04-2012, 04:21 PM

Tail light housings and bezels - $10
I will take them shipping to 77573

Do you have the rear wire harness cab to tail lights?

Frank
Posted via Mobile Device

kevinc · 03-04-2012, 08:09 PM

Tail light and bezels sold to hardrockz28 pending payment.

I do have the tail light harness, but its completely shot. I'm replacing the wiring in my truck and I'm hoping to reuse what's left of the connectors and sockets.

trevrolet65 · 03-04-2012, 09:36 PM

Quote:

Originally Posted by kevinc

trevrolet65 - I do have an auto column, but I'm using it. I do have a "3 on the tree" column that I would be interested in selling, but I haven't removed it yet. Please let me know when you would like to come out for the seat.

duallyjams - Sold to you for $35 shipped pending Payment. Please check your inbox.

Have two three on the tree columns. I'll try to get a hold of ya next week or weekend for that seat, if you still have it. Waxi'hatchy ain't that far. Thanks

kevinc · 03-06-2012, 11:09 AM

Tail lights and bumper brackets sold and shipping tonight.

TTT on the parts left over - please throw an offer. I need these gone!

chad64chevy · 03-06-2012, 12:55 PM

the damaged grille support, would you be willing to cut it up? if so i'm needing two pieces of the bottom to fill in were the frame horns are on my grille support ! i'm wanting to fill in the frame horn notches on mine with pieces from yours, just to be clear!! an out side end from a frame horn notch to the outside edge work!

kevinc · 03-06-2012, 01:42 PM

Yes I would be willing to cut the grille support. At least I know some of it would be put to use and not crushed. I would feel a lot better about that. If you could send me a picture marked exactly what you want to have cut, that would be great since there is only one chance to get it right.

69step4x4 · 03-06-2012, 07:57 PM

Is the drivers door panel good, how much for the drivers shipper to 97424 THATS IF YOU WILL SPLIT UP and its in good shape, LOL i sure want alot huh

Thanks

chad64chevy · 03-07-2012, 12:57 PM

ok i tried to outline want i need, if you cut close to the black lines, that would give me enough to fix mine, thanks!!

XtremeBowtie · 03-07-2012, 01:25 PM

The under dash bracket you have listed wouldn't happen to be the bracket for the emergency brake handle would it?

Thanks,

kevinc · 03-08-2012, 06:15 AM

Sorry it took me a while to get back to you. I've been wrapped up lately dealing with the insurance company and the wind damage to the roof of my house.

69step4x4 - I really want to keep them together. The odds of finding someone who would need just a passenger side door panel are pretty slim and I would end up scrapping it. I'll check into shipping costs tonight when I get home from work.

chad64chevy - Thanks for the picture. That really helped out. I'll cut the section you need out this Saturday.

XtremeBowtie - The bracket I'm referring to is the small bracket that I think attaches to the under dash speaker. This one was just hanging from a bolt and the other end wasn't attached, so I'm assuming its for the speaker.

Thank you,
Kevin C

XtremeBowtie · 03-08-2012, 09:26 AM

Quote:

Originally Posted by kevinc

Sorry it took me a while to get back to you. I've been wrapped up lately dealing with the insurance company and the wind damage to the roof of my house.

69step4x4 - I really want to keep them together. The odds of finding someone who would need just a passenger side door panel are pretty slim and I would end up scrapping it. I'll check into shipping costs tonight when I get home from work.

chad64chevy - Thanks for the picture. That really helped out. I'll cut the section you need out this Saturday.

XtremeBowtie - The bracket I'm referring to is the small bracket that I think attaches to the under dash speaker. This one was just hanging from a bolt and the other end wasn't attached, so I'm assuming its for the speaker.

Thank you,
Kevin C

Oh OK. Thanks for the reply!

chad64chevy · 03-11-2012, 01:06 PM

kevinc, pm me with a total w/shipping an i'll get it to you, thanks!!

kevinc · 03-19-2012, 12:43 PM

TTT. Still have stuff leftover that needs to go. Please make offers.

03-04-2012, 09:58 AM	#1
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Some Leftover Parts I have some parts that are cluttering up my garage that are leftover from a 1965 parts truck. I also have a few 63 parts in here also. All prices are best offer plus shipping. SOME STUFF STILL HERE THAT I NEED TO GET RID OF. PLEASE MAKE AN OFFER! Inner door panels pair - $20 Not sure what kind of mirrors - $5 Motor mount stands - $15 Tail light housings and bezels - $10 - SOLD Cowl Extension panels pair- $20 - SOLD Upper radiator support bracket each - $5 Hood latches Each- $5 Wiper cowl cover - $15 Wiper transmission - $15 Hood hinges pair - $15 Hood hinges with springs - $20 Front bumper brackets - $30 - SOLD Ash tray - $5 Under dash bracket - $5 Radiator top panels pair - $10 - One pair left. Attached Images __________________ 1988 C1500 Regular Cab, Long Bed, 2WD. Last edited by kevinc; 03-19-2012 at 10:11 AM.

03-04-2012, 10:05 AM	#2
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts 1965 Glove box door - $10 1965 Ash tray - $5 Headlight Buckets pair - $15 Grille support - Top rail piece is damaged. Looks like a tree fell on it, but the bottom rail and panels behind the headlights are good. Was going to bring it to the metal recycler, but just don't have the heart to do it. Hopefully someone can cut off the top rail and reuse the rest. If it doesn't sell, then its going to the recycler - $10 - SOLD Attached Images __________________ 1988 C1500 Regular Cab, Long Bed, 2WD. Last edited by kevinc; 03-19-2012 at 10:07 AM.

03-04-2012, 10:11 AM	#3
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts 1965 Deluxe seat - Can you say filthy? Foam cushion and cover for the bottom are bad. Bottom springs, frame and seat adjuster tracks are in very good usable condition. The back cover is dirty, but may be cleaned. No rips or tears. The foam appears good, but dirty. The back frame is good, but several of the springs were cut out for some unknown reason. Local pickup only. $25 - SOLD Attached Images __________________ 1988 C1500 Regular Cab, Long Bed, 2WD. Last edited by kevinc; 03-07-2012 at 06:05 AM.

03-04-2012, 10:15 AM	#4
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts 1963 Grille Support - Excellent condition. Very straight, no rust thru, original condition with no bondo. Body lines are straight and intact. Light surface rust on the back side. Front has some weird flat brown paint on it. No dents or damage. - $135 - REDUCED TO $100 OBO Attached Images __________________ 1988 C1500 Regular Cab, Long Bed, 2WD. Last edited by kevinc; 03-19-2012 at 12:41 PM.

03-04-2012, 10:31 AM	#5
trevrolet65 Registered User Join Date: Nov 2010 Location: Venus Texas Posts: 217	Re: Some Leftover Parts Might be interested in the seat next week. Have any auto steering columns?

03-04-2012, 01:33 PM	#6
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Some Leftover Parts Can you do 35 shipped for the front bumper brackets if so pm me payment info. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

03-04-2012, 03:37 PM	#7
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts trevrolet65 - I do have an auto column, but I'm using it. I do have a "3 on the tree" column that I would be interested in selling, but I haven't removed it yet. Please let me know when you would like to come out for the seat. duallyjams - Sold to you for $35 shipped pending Payment. Please check your inbox. __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

03-04-2012, 04:21 PM	#8
Hardrockz28 Registered User Join Date: Feb 2012 Location: League City TX Posts: 39	Re: Some Leftover Parts Tail light housings and bezels - $10 I will take them shipping to 77573 Do you have the rear wire harness cab to tail lights? Frank Posted via Mobile Device

03-04-2012, 08:09 PM	#9
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts Tail light and bezels sold to hardrockz28 pending payment. I do have the tail light harness, but its completely shot. I'm replacing the wiring in my truck and I'm hoping to reuse what's left of the connectors and sockets. __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

03-06-2012, 11:09 AM	#11
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts Tail lights and bumper brackets sold and shipping tonight. TTT on the parts left over - please throw an offer. I need these gone! __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

03-06-2012, 12:55 PM	#12
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Some Leftover Parts the damaged grille support, would you be willing to cut it up? if so i'm needing two pieces of the bottom to fill in were the frame horns are on my grille support ! i'm wanting to fill in the frame horn notches on mine with pieces from yours, just to be clear!! an out side end from a frame horn notch to the outside edge work! __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

03-06-2012, 01:42 PM	#13
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts Yes I would be willing to cut the grille support. At least I know some of it would be put to use and not crushed. I would feel a lot better about that. If you could send me a picture marked exactly what you want to have cut, that would be great since there is only one chance to get it right. __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

03-06-2012, 07:57 PM	#14
69step4x4 Registered User Join Date: Feb 2007 Location: Cottage Grove, Or Posts: 312	Re: Some Leftover Parts Is the drivers door panel good, how much for the drivers shipper to 97424 THATS IF YOU WILL SPLIT UP and its in good shape, LOL i sure want alot huh Thanks __________________ Lowered 2002 PT Cruiser ONLY for mileage. 1969 Stepside 4x4 ( under construction )

03-07-2012, 12:57 PM	#15
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Some Leftover Parts ok i tried to outline want i need, if you cut close to the black lines, that would give me enough to fix mine, thanks!! Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

03-07-2012, 01:25 PM	#16
XtremeBowtie Registered User Join Date: Dec 2008 Location: Western, NC Posts: 193	Re: Some Leftover Parts The under dash bracket you have listed wouldn't happen to be the bracket for the emergency brake handle would it? Thanks, __________________ First and Foremost: Thank you God for my Salvation! I pray that others will seek your Son, Jesus Christ! https://instagram.com/xtremebowtie My 63 Double Dropmember Build "Project Sub-Zero": http://67-72chevytrucks.com/vboard/s...42#post5050342 My 2013 Camaro 1LE: https://www.youtube.com/channel/UCxa...wL5d6RnmfdJa1A 86 C10 "Build Thread”: http://67-72chevytrucks.com/vboard/s...d.php?t=668777



Register or Log In To remove these advertisements.

03-08-2012, 06:15 AM	#17
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts Sorry it took me a while to get back to you. I've been wrapped up lately dealing with the insurance company and the wind damage to the roof of my house. 69step4x4 - I really want to keep them together. The odds of finding someone who would need just a passenger side door panel are pretty slim and I would end up scrapping it. I'll check into shipping costs tonight when I get home from work. chad64chevy - Thanks for the picture. That really helped out. I'll cut the section you need out this Saturday. XtremeBowtie - The bracket I'm referring to is the small bracket that I think attaches to the under dash speaker. This one was just hanging from a bolt and the other end wasn't attached, so I'm assuming its for the speaker. Thank you, Kevin C __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

03-11-2012, 01:06 PM	#19
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Some Leftover Parts kevinc, pm me with a total w/shipping an i'll get it to you, thanks!! __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

03-19-2012, 12:43 PM	#20
kevinc Registered User Join Date: Mar 2007 Location: Waxahachie, TX Posts: 195	Re: Some Leftover Parts TTT. Still have stuff leftover that needs to go. Please make offers. __________________ 1988 C1500 Regular Cab, Long Bed, 2WD.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.