Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-05-2012, 08:09 PM | #1 |
Registered User
Join Date: Sep 2009
Location: Taylorsville, KY
Posts: 261
|
Hard lesson of the day/benchseat springs
So I'm new to this, the '69 K10 I bought is my first classic truck. I'm doing/having a few thing done to it and know some mechanics out in the country that have worked on a great deal of this era trucks. They even have a 2wd '70 in their garage that is REAL nice.
I ordered a new houndstooth seatcover from the guy on this board that sells them and it arrives. So I took my seat out and asked my mechanic where he had his re-done. He tells me and i go there and drop it off this morning. Here is where the lesson begins. The upholsterer calls me later today and asks me if I had another seat frame to bring in. I say of course not I just want the one I dropped off re-done and covered with the cover I brought in. He says this one needs a bunch of new springs. I said that I thought that is what he did and he says he doesn't have a source for them. I about wrecked my car. I was real excited to get a like new seat and now I have to buy another seat just to get that one fixed. I get on the internet and it seems like every single part on the entire truck is available aftermarket except benchseat springs. Is that correct? Does anybody have a source for benchseat springs? How hard are they to make? If they are just bent round stock I can do that myself. Any help is greatly appreciated. |
03-05-2012, 08:25 PM | #2 |
Registered User
Join Date: Mar 2001
Location: Paradise TX USA
Posts: 1,200
|
Re: Hard lesson of the day/benchseat springs
it's pretty common to find a few broken springs on the driver's side. They can be repaired fairly easily using some "spring steel", out of another old seat, an old mattress, couch, chair, etc. Just another challenge you run into when rebuilding an old vehicle.
__________________
"Negative people always seem to have a problem for every solution" |
03-05-2012, 09:06 PM | #3 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Hard lesson of the day/benchseat springs
^ Yep. It's part of the challenge. You have to go to a salvage yard and try to find old trucks to salvage from. Either that or swap for a newer seat that's similar and you can adapt it to fit your truck.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|