Does anybody out there have a short bed 73-81 bed ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kickinbigblock468 · 04-27-2002, 11:45 AM

Hey,
I've been looking for a short bed fleetside for my 81 silverado for the longest time now. I swear to god the things dont exhist. Right now I'd even go for one in decent condition that needed a litte work. Hopefully in connecticut. Thanks.

------------------
1981 Chevy Silverado
468 cid big block
Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock)
11.5:1 compression
Comp roller cam and lifters
Comp cams roller rockers
Steel Manley connecting rods
MSD-10 ignition with Pro Billet distributor
Pete Jackson gear drive timing gears
Saveing for a set of Alluminum heads and an 8-71 Blower

chevy68388 · 04-29-2002, 09:19 PM

i have a short bed but its rough and im not for sure it is what u are wanting e mail me at dksixpack289@aol.com and i will send u a pic its geting ready for the juck yard in the sky

**Desert Rat** · 04-30-2002, 03:26 PM

I have one thats decent,straight.upper and lower chrome $125 in AZ

**Captkaos** · 04-30-2002, 08:24 PM

I have a '80 model bed for sale. It is pretty straight, but needs painting. I am wanting $400 for it. I am in Birmingham, AL though.

------------------
Chris Lucas
1973 Chevy C-10
1975 Chevy Silverado
Captkaos Customs

*Fast68Chevy* · 05-01-2002, 04:47 PM

crap my stepdad would freak, that is exactly same, almost same blue even that he needs for the 82 K10, the bed on it is toasted bad rotted all the way up to body line. Cab same way, nice truck thoogh new engine and tranny and rebuilt case and front end and such, so..

damn.,,

chevy72402 · 05-01-2002, 06:35 PM

Does that bed have dual tanks on it?????

------------------
72 chevy super, long box, 402 big block (2,000 miles on rebuild 2wd orange and white.
84 k10 4x4 crate 350 with 330 hp

kickinbigblock468 · 05-01-2002, 08:44 PM

I only have a single tank. Could I put on a bed with a setup for dual tanks and only have one? If I could I would.

------------------
1981 Chevy Silverado
468 cid big block
Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock)
11.5:1 compression
Comp roller cam and lifters
Comp cams roller rockers
Steel Manley connecting rods
MSD-10 ignition with Pro Billet distributor
Pete Jackson gear drive timing gears
Saveing for a set of Alluminum heads and an 8-71 Blower

**Captkaos** · 05-02-2002, 01:46 PM

My bed is a single tank. Dual can be mounted on a single, you will just have a opening for nothing, or you could add the second tank.

------------------
Chris Lucas
1973 Chevy C-10
1975 Chevy Silverado
Captkaos Customs

04-27-2002, 11:45 AM	#1
kickinbigblock468 Registered User Join Date: Mar 2002 Location: Beacon Falls Connecticut 06403 Posts: 31	Does anybody out there have a short bed 73-81 bed ? Hey, I've been looking for a short bed fleetside for my 81 silverado for the longest time now. I swear to god the things dont exhist. Right now I'd even go for one in decent condition that needed a litte work. Hopefully in connecticut. Thanks. ------------------ 1981 Chevy Silverado 468 cid big block Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock) 11.5:1 compression Comp roller cam and lifters Comp cams roller rockers Steel Manley connecting rods MSD-10 ignition with Pro Billet distributor Pete Jackson gear drive timing gears Saveing for a set of Alluminum heads and an 8-71 Blower __________________ 1981 Chevy Silverado 468 cid big block Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock) 11.5:1 compression Comp roller cam and lifters Comp cams roller rockers Steel Manley connecting rods MSD-10 ignition with Pro Billet distributor Pete Jackson gear drive timing gears Saveing for a set of Alluminum heads and an 8-71 Blower

04-29-2002, 09:19 PM	#2
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	i have a short bed but its rough and im not for sure it is what u are wanting e mail me at dksixpack289@aol.com and i will send u a pic its geting ready for the juck yard in the sky __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

04-30-2002, 08:24 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I have a '80 model bed for sale. It is pretty straight, but needs painting. I am wanting $400 for it. I am in Birmingham, AL though. ------------------ Chris Lucas 1973 Chevy C-10 1975 Chevy Silverado Captkaos Customs __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

05-01-2002, 06:35 PM	#6
chevy72402 FARMER/RANCHER Join Date: Apr 2001 Location: SD Posts: 597	Does that bed have dual tanks on it????? ------------------ 72 chevy super, long box, 402 big block (2,000 miles on rebuild 2wd orange and white. 84 k10 4x4 crate 350 with 330 hp __________________ 1972 chevy super, long box, 402 big block (2,000 miles on rebuild) 2wd tach, tilt, tool box on bedside, a/c, sliding rear window, orange and white. 1972 Chevy Blazer 2wd, tach, tilt, a/c, my first engine overhauling experience, Orange, with white top 2006 Gmc Sierra, XM, Z-71, dark blue, onstar, leather, rear entertainment (audio only) heated seats, (the wife loves that feature) upgraded tires immediately after purchase to Goodyear Wrangler AT/S (hate those rock throwers that come from the factory) BWC

05-01-2002, 08:44 PM	#7
kickinbigblock468 Registered User Join Date: Mar 2002 Location: Beacon Falls Connecticut 06403 Posts: 31	I only have a single tank. Could I put on a bed with a setup for dual tanks and only have one? If I could I would. ------------------ 1981 Chevy Silverado 468 cid big block Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock) 11.5:1 compression Comp roller cam and lifters Comp cams roller rockers Steel Manley connecting rods MSD-10 ignition with Pro Billet distributor Pete Jackson gear drive timing gears Saveing for a set of Alluminum heads and an 8-71 Blower __________________ 1981 Chevy Silverado 468 cid big block Edelbrock Tunnel Ram Dual Quad Intake (2 600cfm edelbrock) 11.5:1 compression Comp roller cam and lifters Comp cams roller rockers Steel Manley connecting rods MSD-10 ignition with Pro Billet distributor Pete Jackson gear drive timing gears Saveing for a set of Alluminum heads and an 8-71 Blower

04-30-2002, 03:26 PM	#3
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I have one thats decent,straight.upper and lower chrome $125 in AZ

05-01-2002, 04:47 PM	#5
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	crap my stepdad would freak, that is exactly same, almost same blue even that he needs for the 82 K10, the bed on it is toasted bad rotted all the way up to body line. Cab same way, nice truck thoogh new engine and tranny and rebuilt case and front end and such, so.. damn.,,

05-02-2002, 01:46 PM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	My bed is a single tank. Dual can be mounted on a single, you will just have a opening for nothing, or you could add the second tank. ------------------ Chris Lucas 1973 Chevy C-10 1975 Chevy Silverado Captkaos Customs __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.