WA Nice 1971-72 Deluxe Accelerator Pedal & Bracket Assembly

[ETsC10]

OEM Accelerator Mounting Bracket + Deluxe Gas Pedal $40 + ship

Blasted, primed, painted, pretty darned nice.

There is ZERO rust or damage to the assembly.
Bracket designed to accept T400 kick down switch.

Inspected for twists and seats flat on the firewall. Following a
thorough cleaning, the bracket has been painted satin black and
the pedal cleaned and inspected. The pedal has some wear
but the slip resistant grooves still have plenty of bite.

Pedal beauty ring is in fairly nice condition…some wear near
top of pedal but still quite presentable. All tabs good & no rust.

Does not include the cable or kick down switch…just what’s in the photos.

Note: There were at least three brackets used in 71-72,
so make sure this is the one you want.
If in doubt, ask here and I'll post pics of the other two styles I have.

No PM sales and please post in thread. Thanks, Ellen



.

[HotRod C/10]

I am looking to convert my 68 setup to these years.....wonder if its a direct bolt up?

[fastcam1]

put me in line qoute for 98387?

[ETsC10]

Originally Posted by fastcam1

put me in line qoute for 98387?

Here ya go...
Parcel Post (slow) $6.49
Priority (fast) $6.85

Originally Posted by Livrat

The 71/72 style accelerator assemblies are not a direct bolt up and require a few modifications, or use one of Kevins bolt on adapters,
Here is a link to the info:

http://67-72chevytrucks.com/vboard/s...d.php?t=371099

Thanks Mark!

[fastcam1]

Originally Posted by ETsC10

Here ya go...
Parcel Post (slow) $6.49
Priority (fast) $6.85



Thanks Mark!

Alright I'll take it! Will you do PayPal?
Posted via Mobile Device

[ETsC10]

PayPals fine. PM on the way.

Thanks!

[Livrat]

Originally Posted by DSALRAM

I am looking to convert my 68 setup to these years.....wonder if its a direct bolt up?

The 71/72 style accelerator assemblies are not a direct bolt up and require a few modifications, or use one of Kevins bolt on adapters,
Here is a link to the info:

http://67-72chevytrucks.com/vboard/s...d.php?t=371099

[HotRod C/10]

guess i was kicked out of the loop on this one.

[ETsC10]

Originally Posted by DSALRAM

guess i was kicked out of the loop on this one.

Sorry. Didn't realize it wasn't just a Q.
Do you have a T400?? I have one non-T400
and another T400 set-up.

Be back with pics
-------------------------------------------

Here's the non-T400 bracket: It has a regular pedal.
Pedal, retainer & arm are about the same condition as above.
SOLD Saturday

[ETsC10]

And the 3rd assy is for T400.
Regular pedal but comes with a kick down switch,
pedal, arm & retainer.
I tried to photo it just now and my camera flash
won't work.
These are pics before it got paint.
Switch has been tested. $40+ship

[markeb01]

Originally Posted by ETsC10

-------------------------------------------

Here's the non-T400 bracket: It has a regular pedal.
Pedal, retainer & arm are about the same condition as above.
$30+ride

I'll take the non-T400 setup. Just let me know the total cost with shipping to 99216 and I'll post a Paypal payment. Thx, Mark.

[ETsC10]

Originally Posted by markeb01

I'll take the non-T400 setup. Just let me know the total cost with shipping to 99216 and I'll post a Paypal payment. Thx, Mark.

$37.00 total (30+7), shipped USPS Priority.

PM sent. Thank you!

[markeb01]

Payment sent. Thanks again, very much appreciated!

[ETsC10]

Originally Posted by markeb01

Payment sent. Thanks again, very much appreciated!

Thanks Mark! Be in the mail Monday.