Are New NOS GM door handles "defects/seconds"?

[PICKMUP]

I see a lot of new GM NOS outside door handles showing up for sale all over the internet. Are they rejects? Defects? Seconds?
I bought a pair (not from this board) and both were bad! The buttons were tight/stuck and would not move all the way out without binding. One just blew the spring & parts all over the desk. It looks like the inside plates were riveted off center---binding on one side and a big gap on the other.
Where did all of these come from? Why are they released now? Anyone else seeing these or other problems?
I recommend if you just bought some, open the boxes and inspect them.
Also, if you are buying, ask the seller to open the boxes and check them closely BEFORE shipping.

[mcbassin]

Originally Posted by PICKMUP

I see a lot of new GM NOS outside door handles showing up for sale all over the internet. Are they rejects? Defects? Seconds?
I bought a pair (not from this board) and both were bad! The buttons were tight/stuck and would not move all the way out without binding. One just blew the spring & parts all over the desk. It looks like the inside plates were riveted off center---binding on one side and a big gap on the other.
Where did all of these come from? Why are they released now? Anyone else seeing these or other problems?
I recommend if you just bought some, open the boxes and inspect them.
Also, if you are buying, ask the seller to open the boxes and check them closely BEFORE shipping.

I haven't bought any yet so I don't know about them being defects? I just can't figure out why all of the sudden there are so many for sale? Where did they all come from? I have been looking for a "deal" on some for over a year and I've never seen this many in that time frame.
Posted via Mobile Device

[too much stuff]

Mine seem to be fine. I agree that it is odd that so many showed up all of a sudden. The dates on mine are 98 and 02 if that makes any difference.

[gearys 5600]

I had to buy 2 sets to make one nice set...

[cdowns]

Originally Posted by too much stuff

Mine seem to be fine. I agree that it is odd that so many showed up all of a sudden. The dates on mine are 98 and 02 if that makes any difference.

with dates of 98 and 02 they are not NOS

NOS dates will be from 67-72

[Newtz67]

Originally Posted by cdowns

with dates of 98 and 02 they are not NOS

NOS dates will be from 67-72

This is what I always thought.

[VA72C10]

I have three and they all function fine but the chrome isn't what I'd call show quality....it's not bad, but not perfect (trash/pitting under the chrome (not rust) I sold another pair a while back and the same can be said of the chrome on my NOS mirrors. Some of the NOS mirrors are from the 70's and some mfr'd in the early 90's and they look the same to me as far as chrome which was surprising...

It is interesting so many came for sale at once...but might just be coincidence or someone finding a stash of 50 or so pair they sold online and several of our savvy members picked up??? I don't know...just a theory. Or, it could just be that spring is the best time to sell parts as people are wanting to work on their projects and lots of guys need cash for their own projects so they're clearing out old inventory...

[29od1]

Or maybe some of our KC friends can let us in on how they came about all these NOS handles??

[special-K]

Are there bar codes on the boxes? There are no bar codes on original parts from this era. GM started selling repro parts made by the same companies in a foreign land as any other vendor when they started GM Restoration Parts 20 or more years ago. These parts are in GM boxes but are by no means N.O.S.,or OEM for that matter.

[too much stuff]

Originally Posted by special-K

Are there bar codes on the boxes? There are no bar codes on original parts from this era. GM started selling repro parts made by the same companies in a foreign land as any other vendor when they started GM Restoration Parts 20 or more years ago. These parts are in GM boxes but are by no means N.O.S.,or OEM for that matter.

I guess i can't totally agree with you. Just because there is a bar code doesn't mean it isn't nos. Just means it was made later i think. I have some parts made in the 90s with a bar code, michigan address and part numbers cast on the parts. Is that not NOS? Granted, i know some of the stuff you buy now from gm can be made in china or assembled in mexico.
I had also heard that some parts were re-boxed at a later date to update the boxes or add the bar code. No idea if that is true.
Up until a few years ago you could still get cheyenne-10 emblems from GM. What would those be? If they are gone now where would the restoration parts start?

[Newtz67]

Subscribed to see the final verdict on this.

[PICKMUP]

The guy that sold me these (EBAY) said he has sold 30 pr and has 75 pr left...no reported problems. Yet, both of the ones he sold me were really bad and would not work at all!
I don't mind GM selling retooled or newly made parts IF they meet original specs.

[mcbassin]

Originally Posted by PICKMUP

The guy that sold me these (EBAY) said he has sold 30 pr and has 75 pr left...no reported problems. Yet, both of the ones he sold me were really bad and would not work at all!
I don't mind GM selling retooled or newly made parts IF they meet original specs.

Over a hundred pairs?? wow I wonder where the heck he got that many?Surely there isn't someone making counterfeits out there?

[Newtz67]

Originally Posted by mcbassin

Over a hundred pairs?? wow I wonder where the heck he got that many?Surely there isn't someone making counterfeits out there?

Good call, I'm thinking...

[Fldawg]

well i don't know about the door handles , but gm just quit making the factory grilles for 69-70 about four years ago. Believe it or not!

[VA72C10]

Originally Posted by Fldawg

well i don't know about the door handles , but gm just quit making the factory grilles for 69-70 about four years ago. Believe it or not!

yes, and many of those last run of grills I've seen had issues with the black painted areas being very poorly done...

[davepl]

Agreed that NOS != Original GM. NOS is going to be a part that was made during the production run, or arguably with the same tooling shortly thereafter. After that you will find "Original GM" stuff made by GM at some point after, as a replacement part, and unless it was really a decorative cosmetic item (which door handles should be) even a GM part only has to "function as original".

Some people/vendors use NOS to mean so many things, sometimes out of ignorance and sometimes deceptively, but as far as I'm concerned a door handle made in 1998 or 2002 isn't NOS.

That said, the quality of some of the reproduction stuff I've ordered recently is so poor in quality or appearance that I'm getting pretty bummed about the aftermarket. And its not specific to any one vendor. I wish they'd honestly rate them on a two-axis function/appearance scale so I knew up front what I was buying.

As it is I've stuck to buying from vendors with flexible return policies, because a box of parts is becoming like a box of chocolates...

[shawno72]

New Old Stock is just that IMO old parts that have never been used. Not parts made 10 years ago. You have to be careful I have seen a lot of stuff sold a NOS when in fact it's new GM but not old new GM, make sense?

[VA72C10]

I asked the NOS question a while ago and the consensus at that point was that NOS is any discontinued GM made part. I have made the mistake of selling some parts as NOS not knowing they were still being produced. Like the deluxe sidemarkers that were still produced until the last couple years. Now they are discontinued and I consider them NOS now since they are New parts but Old Stock (not being made today)

[shawno72]

Guess it's just a matter of what you expect for NOS. Me I want 40 year parts that were never installed. To me that's where the value is, someone had to store them for 40 years without using them worth a little more money for that alone.

[VA72C10]

Originally Posted by shawno72

Guess it's just a matter of what you expect for NOS. Me I want 40 year parts that were never installed. To me that's where the value is, someone had to store them for 40 years without using them worth a little more money for that alone.

like the NOS door latch I saw sell for over 450 on ebay???

Still shaking my head over that one...

[Newtz67]

Originally Posted by VA72C10

like the NOS door latch I saw sell for over 450 on ebay???

Still shaking my head over that one...

Wow.

[shawno72]

Originally Posted by VA72C10

like the NOS door latch I saw sell for over 450 on ebay???

Still shaking my head over that one...

Originally Posted by Newtz67

Wow.

I guess there thinking that NOS was made out of gold

[m6z]

Originally Posted by davepl

Agreed that NOS != Original GM. NOS is going to be a part that was made during the production run, or arguably with the same tooling shortly thereafter. After that you will find "Original GM" stuff made by GM at some point after, as a replacement part, and unless it was really a decorative cosmetic item (which door handles should be) even a GM part only has to "function as original".

Some people/vendors use NOS to mean so many things, sometimes out of ignorance and sometimes deceptively, but as far as I'm concerned a door handle made in 1998 or 2002 isn't NOS.

That said, the quality of some of the reproduction stuff I've ordered recently is so poor in quality or appearance that I'm getting pretty bummed about the aftermarket. And its not specific to any one vendor. I wish they'd honestly rate them on a two-axis function/appearance scale so I knew up front what I was buying.

As it is I've stuck to buying from vendors with flexible return policies, because a box of parts is becoming like a box of chocolates...

I've been wondering this as well. "NOS" with a barcode on the box doesn't seem right at all.

[teeitup]

I've got a pass side door handle in a older box with a barcode on it