71 Center link question.

[Frijolito1988]

Guys quick question.

I have a 68 SWB and almost done with the disc conversion. When I put in the caliper and all those parts, I also have to change the inner and outer tie rod, tie rod sleve and center link ? I could find all the parts exept for the center link so wanted to double check.

[Frijolito1988]

also is center link and drag link the same thing ?

[gcburdic]

so did you install a 71 x-member/ parts for your upgrade?

[Frijolito1988]

Originally Posted by gcburdic

so did you install a 71 x-member/ parts for your upgrade?

No just the spindles , rotors, calipers, ball joints tie rods ( inner / outer ) tie rod sleves, master cylinder and all that. i THINK the only thing im missing is the drag link , center link ?

Edit

I havent intalled the Inner and outer tie rods yet, still need that drag link??

[stealthy '69]

Originally Posted by Frijolito1988

No just the spindles , rotors, calipers, ball joints tie rods ( inner / outer ) tie rod sleves, master cylinder and all that. i THINK the only thing im missing is the drag link , center link ?

Edit

I havent intalled the Inner and outer tie rods yet, still need that drag link??

I did the same thing with my '69. I replaced the center link out. You are on the right track. Like stated above, get your self a 71/72 center/drag link and be 100% on your front end parts. This way you aren't scratching your head later trying to remember what you used.

[Frijolito1988]

This write up is really helpfull. According to this I think all i have to do is the center link?

http://67-72chevytrucks.com/vboard/s...68&postcount=4

[Frijolito1988]

I was thinking, does a company sell a modified Tie rod sleeve ? Which will allow me to use my 68' Drag link and inner tie rod , and use the 71 outer tie rod ? Since the 68/71 tie rods are different size ?

[Frijolito1988]

Just checked with CPP and they said I can use 73-87 tie rods so I dont have to change my drag link ? Is that even possible ?

[gcburdic]

I think I would stick with a 71/72 centerlink if I were you...so when you have to replace these in the future you don't have to try and remember what you did....here a quick picture I took of the difference between the 2...

[lolife99]

71-72 centerlinks aren't available new,... So you will have to find a used one.
Just curious,... Did you piece together your disc conversion or buy a kit?

The aftermarket now makes bolt-on direct fit spindles so you don't have to change all your steering components.
Posted via Mobile Device