IN WTB Solid Door Pairs or drivers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 05-13-2012, 10:56 PM

Just need some solid ones to work with. I would like to buy them in bulk. At least two pairs. I can arrange all shipping they would need to be secured to a pallet with straps is all. Could be picked up anywhere but business address is preferred. Thanks

*sharpie1972* · 05-13-2012, 11:25 PM

Dang! Too bad you didn't send a buyer to my auction! Might scrounge you a few sets out of the Dirty Dozen though. Sharpie

HeavyMetalChevy · 05-13-2012, 11:30 PM

My place is starting to look like that.

HeavyMetalChevy · 05-13-2012, 11:29 PM

Yeah I think I missed that by what....a year???? lol

*sharpie1972* · 05-13-2012, 11:32 PM

Quote:

Originally Posted by HeavyMetalChevy

Yeah I think I missed that by what....a year???? lol

I didn't have any 396 emblems though! hehe. Sharpie

HeavyMetalChevy · 05-13-2012, 11:35 PM

Quote:

Originally Posted by sharpie1972

I didn't have any 396 emblems though! hehe. Sharpie

I got some nice non repopped 296 ones as well. Just keep forgetting to pull them.

HeavyMetalChevy · 05-13-2012, 11:37 PM

Quote:

Originally Posted by sharpie1972

I didn't have any 396 emblems though! hehe. Sharpie

Also how did you go about your auction? Some parts lots and some single? I have had auctions before but for my storage units. Just trying to come up with best way to move the randoms I have accumulated. I need to set up at a swap but just tied up with the property quite a bit.

*sharpie1972* · 05-13-2012, 11:44 PM

Quote:

Originally Posted by HeavyMetalChevy

Also how did you go about your auction? Some parts lots and some single? I have had auctions before but for my storage units. Just trying to come up with best way to move the randoms I have accumulated. I need to set up at a swap but just tied up with the property quite a bit.

Auctioned choice on similar items until that peetered out and then sold the rest of the lot. Most lots were on pallets, so it worked out pretty slick. Sharpie

**special-K** · 05-14-2012, 08:03 PM

By solid you mean with no rust,right? I have a pair I'd sell for $500.

HeavyMetalChevy · 05-15-2012, 12:02 AM

Quote:

Originally Posted by special-K

By solid you mean with no rust,right? I have a pair I'd sell for $500.

so do I...lol and a few more... That is why I am trying to buy in bulk to reflect prices. Thanks

**special-K** · 05-15-2012, 08:08 AM

I wish you luck (not being sarcastic). It's not like they're abundant and I'd think anyone with any would know this and want what they're worth. I hang onto doors for that reason. I have a stash,but considered selling these because I bought a pair of '67s with correct trim holes from Ortegamotors last year to replace them...since I'm making the truck as '67 as possible. But,I don't mind hanging onto them.

2002yanks · 05-15-2012, 07:15 PM

HeavyMetalChevy, i have 2 pairs of doors. 1 i would call drivers, they need lower corner work on the outside(inside looked good). the other pair needs new lower panels on the inside and corner work on the outside(bodyline up they are nice doors). i could strip them down so they are bare doors(nothing in them). $250 for all 4(200 for the decent pair and 50 for the others). let me know(can be picked up from a business address with forklift).

HeavyMetalChevy · 05-15-2012, 07:22 PM

Quote:

Originally Posted by 2002yanks

HeavyMetalChevy, i have 2 pairs of doors. 1 i would call drivers, they need lower corner work on the outside(inside looked good). the other pair needs new lower panels on the inside and corner work on the outside(bodyline up they are nice doors). i could strip them down so they are bare doors(nothing in them). $250 for all 4(200 for the decent pair and 50 for the others). let me know(can be picked up from a business address with forklift).

Can you post some pics? Would be great. Thanks

2002yanks · 05-15-2012, 07:37 PM

red set is the driver set. both are nice body line up. just need typical repairs for around here.

c1069 · 05-15-2012, 09:12 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=510771 here are some rust free, bare doors for only 200 plus s+h

HeavyMetalChevy · 05-15-2012, 09:27 PM

Quote:

Originally Posted by c1069

http://67-72chevytrucks.com/vboard/s...d.php?t=510771 here are some rust free, bare doors for only 200 plus s+h

I will take those man. Thanks! Can you get a pallet? I also will send an extra $20 for a strap set. I can arrange all shipping. Do you have a business address (work, local hardware, buddy,etc.) they could be picked up at? That will be the only hassle. Heck you could even meet the driver at a Home Depot, Parking lot, etc. As long as it is Commercial/business. Expensive surcharge for residential pickup.

c1069 · 05-15-2012, 11:57 PM

I work in a farm company so is a commercial address my zip code is 93215. Thanks
Posted via Mobile Device

HeavyMetalChevy · 05-16-2012, 01:01 AM

Quote:

Originally Posted by c1069

I work in a farm company so is a commercial address my zip code is 93215. Thanks
Posted via Mobile Device

Sweet! Perfect. I will get payment to you ASAP.

c1069 · 05-16-2012, 09:26 PM

let me get them in a pallet again cuz i need to take windows off, etc.

HeavyMetalChevy · 05-16-2012, 09:37 PM

Quote:

Originally Posted by c1069

let me get them in a pallet again cuz i need to take windows off, etc.

No problem.. Take your time.. That gives me more time to ship. I def. want them though.

c1069 · 05-16-2012, 09:54 PM

here is work address

34121 Highway 155
Delano, Ca. 93215

We have forklifts.
Thanks

05-13-2012, 10:56 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	WTB Solid Door Pairs or drivers Just need some solid ones to work with. I would like to buy them in bulk. At least two pairs. I can arrange all shipping they would need to be secured to a pallet with straps is all. Could be picked up anywhere but business address is preferred. Thanks __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-13-2012, 11:25 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB Solid Door Pairs or drivers Dang! Too bad you didn't send a buyer to my auction! Might scrounge you a few sets out of the Dirty Dozen though. Sharpie Attached Images Last edited by sharpie1972; 05-13-2012 at 11:33 PM.

05-13-2012, 11:30 PM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB Solid Door Pairs or drivers My place is starting to look like that. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-13-2012, 11:29 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB Solid Door Pairs or drivers Yeah I think I missed that by what....a year???? lol __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-14-2012, 08:03 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB Solid Door Pairs or drivers By solid you mean with no rust,right? I have a pair I'd sell for $500. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-15-2012, 08:08 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB Solid Door Pairs or drivers I wish you luck (not being sarcastic). It's not like they're abundant and I'd think anyone with any would know this and want what they're worth. I hang onto doors for that reason. I have a stash,but considered selling these because I bought a pair of '67s with correct trim holes from Ortegamotors last year to replace them...since I'm making the truck as '67 as possible. But,I don't mind hanging onto them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-15-2012, 07:15 PM	#12
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: WTB Solid Door Pairs or drivers HeavyMetalChevy, i have 2 pairs of doors. 1 i would call drivers, they need lower corner work on the outside(inside looked good). the other pair needs new lower panels on the inside and corner work on the outside(bodyline up they are nice doors). i could strip them down so they are bare doors(nothing in them). $250 for all 4(200 for the decent pair and 50 for the others). let me know(can be picked up from a business address with forklift).

05-15-2012, 07:37 PM	#14
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: WTB Solid Door Pairs or drivers red set is the driver set. both are nice body line up. just need typical repairs for around here. Last edited by 2002yanks; 06-01-2012 at 05:02 PM.

05-15-2012, 09:12 PM	#15
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB Solid Door Pairs or drivers http://67-72chevytrucks.com/vboard/s...d.php?t=510771 here are some rust free, bare doors for only 200 plus s+h __________________ Pancho 69 c/10 step side 454/400 with 3.07

05-15-2012, 11:57 PM	#17
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB Solid Door Pairs or drivers I work in a farm company so is a commercial address my zip code is 93215. Thanks Posted via Mobile Device __________________ Pancho 69 c/10 step side 454/400 with 3.07

05-16-2012, 09:26 PM	#19
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB Solid Door Pairs or drivers let me get them in a pallet again cuz i need to take windows off, etc. __________________ Pancho 69 c/10 step side 454/400 with 3.07

05-16-2012, 09:54 PM	#21
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB Solid Door Pairs or drivers here is work address 34121 Highway 155 Delano, Ca. 93215 We have forklifts. Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.