what rear brake hose to use with lift

[Wildstreak]

Ive just ordered 8' spring all the way around for my 68 they have extended front brake hoses but what am I to do with the rear? it has a 12 bolt rear, any suggestions? part numbers?

[obijuan]

go to a local brake and hydraulic shop and get it made. bring your old one with you and tell them to make it longer.

[mcmlxix]

I like Kore3. I used them to build the ones for my Chevelle when I installed the C5 brakes...

[OrrieG]

I worked with Russell directly, I have 74 K10 axles on the 59 springs. I measured from the calipers in front to the fitting at the frame, and from fitting I located at the frame cross member above the axle to the stock Tee on the rear axle. Turned out a 4" lift kit for a 74 worked out ok. The tech I talked to was able to look up lines based on the length and type/size of fitting on each end. He also said it they did not work they would exchange them and pay the shipping. I've recommended them a bunch of times with no complaints I know of.

[76stepsidechevy]

I went down to my local napa and had them pull a stock one off the shelf and then find the same thing but 6" longer and they did. I think it was only like 15 bucks too.

[HEISEL]

if its not to late, brake line on 97 1500 chevy 2wd are 24" long. I had the same prob not to long ago. got the rear off a 1997 1500 2wd and the front are off a 77 3/4 ton 2wd. hope that helps.