TX 1971/2 LWB rolling Frame DISC/Rear end. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Mach1 · 06-22-2012, 09:42 PM

***SOLD and picked up***

FS: 1971 or 72 Long WHeel base rolling frame More items on my liquidation list This is a standard frame with standard rear end and front end for a 71-72.

*** Not Disc rear but Disc front five lug and five lug rear end. Not a disc rear end. Sorry for confusion on the title****

As you see it in photos is what you get. These rims may not be the rms on it but I'll make sure you get someting to roll it onto the trailer.

Not sure about the blue springs but was told they were lowering springs of some kind???

Asking 350.00 OBO.

Will not sell front end or rear end separate at this time.

Need to be local to Central texas as I do not intend to ship this frame. Located near College Station, TX.

Thanks,
Thomas

Please reply in thread

72Blazing · 06-23-2012, 08:29 AM

Would you do $300? If so I will take it.
Thanks,
Chris
Posted via Mobile Device

67Mach1 · 06-23-2012, 08:39 AM

Quote:

Originally Posted by 72Blazing

Would you do $300? If so I will take it.
Thanks,
Chris
Posted via Mobile Device

WHen can you come and get it?

I am not located in same city but go there about every third weekend.

I re-read my add... Just to be clear it does not have a disc rear end its disc front and normal rear end.

72Blazing · 06-23-2012, 09:22 AM

I can come get it next weekend if that works for you?
Exactly where is it located?
Thanks,
Chris
Posted via Mobile Device

67Mach1 · 06-23-2012, 11:56 AM

I'll send you a PM. THe frame is located in Hearne, TX at my folks place

Leadfoot1016 · 06-24-2012, 10:48 AM

If buyer backs out, would u sell me the spindles, and rear end? I'm converting to 5 lug with disc brakes. Thanks
Posted via Mobile Device

67Mach1 · 06-24-2012, 04:48 PM

Quote:

Originally Posted by Leadfoot1016

If buyer backs out, would u sell me the spindles, and rear end? I'm converting to 5 lug with disc brakes. Thanks
Posted via Mobile Device

Leadfoot thanks for the inquiery but right now I do not know how to ship someitng like this and I'd rather have local pick up of the complete frame. Lets see how it goes and if this falls through and no one else locally steps up to the plate I'd consider it.

Leadfoot1016 · 06-24-2012, 05:40 PM

Hey man, no problem. Just keep me posted
Posted via Mobile Device

67Mach1 · 06-24-2012, 05:48 PM

Sale Pending with 72Blazing. I'll update next weekend with status.

67Mach1 · 07-01-2012, 11:24 PM

SOLD!

Thanks Chris, Good luck with your project!

72Blazing · 07-02-2012, 10:28 AM

Thanks for everything Thomas.
I will start a build thread when I get started on it.
Posted via Mobile Device

06-22-2012, 09:42 PM	#1
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	1971/2 LWB rolling Frame DISC/Rear end. *SOLD and picked up* FS: 1971 or 72 Long WHeel base rolling frame More items on my liquidation list This is a standard frame with standard rear end and front end for a 71-72. * Not Disc rear but Disc front five lug and five lug rear end. Not a disc rear end. Sorry for confusion on the title** As you see it in photos is what you get. These rims may not be the rms on it but I'll make sure you get someting to roll it onto the trailer. Not sure about the blue springs but was told they were lowering springs of some kind??? Asking 350.00 OBO. Will not sell front end or rear end separate at this time. Need to be local to Central texas as I do not intend to ship this frame. Located near College Station, TX. Thanks, Thomas Please reply in thread Attached Images __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 07-01-2012 at 11:25 PM. Reason: mistyped title.

06-23-2012, 08:29 AM	#2
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 396	Re: 1971/2 LWB rolling Frame DISC/Rear end. Would you do $300? If so I will take it. Thanks, Chris Posted via Mobile Device

06-23-2012, 09:22 AM	#4
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 396	Re: 1971/2 LWB rolling Frame DISC/Rear end. I can come get it next weekend if that works for you? Exactly where is it located? Thanks, Chris Posted via Mobile Device

06-23-2012, 11:56 AM	#5
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1971/2 LWB rolling Frame DISC/Rear end. I'll send you a PM. THe frame is located in Hearne, TX at my folks place __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

06-24-2012, 10:48 AM	#6
Leadfoot1016 Registered User Join Date: Mar 2012 Location: Calhoun ga Posts: 3	Re: 1971/2 LWB rolling Frame DISC/Rear end. If buyer backs out, would u sell me the spindles, and rear end? I'm converting to 5 lug with disc brakes. Thanks Posted via Mobile Device

06-24-2012, 05:40 PM	#8
Leadfoot1016 Registered User Join Date: Mar 2012 Location: Calhoun ga Posts: 3	Re: 1971/2 LWB rolling Frame DISC/Rear end. Hey man, no problem. Just keep me posted Posted via Mobile Device

06-24-2012, 05:48 PM	#9
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1971/2 LWB rolling Frame DISC/Rear end. Sale Pending with 72Blazing. I'll update next weekend with status. __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

07-01-2012, 11:24 PM	#10
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: 1971/2 LWB rolling Frame DISC/Rear end. SOLD! Thanks Chris, Good luck with your project! __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

07-02-2012, 10:28 AM	#11
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 396	Re: 1971/2 LWB rolling Frame DISC/Rear end. Thanks for everything Thomas. I will start a build thread when I get started on it. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.