AZ 71 Chevy for parts

[t korinek]

3/4 ton 2 wheel drive long bed, 350, auto, non tilt.
Here's some parts that are in good shape.

Tailgate, outside is straight, some dents on the inside, not bowed out, no rust $225 SOLD
Grill is in good driver shape, one of the mounting tabs for the inner grill is broken, could be glued back together, bowtie is missing & so are the side mount brackets that hold it to the fenders $175.SOLD

2 16.5 factory steel wheels $30 each
3 16" X6.5 factory steel wheels $30 each

AC dash $75
Disk brake front end $175
Dana 60 rear $175
Parchment visors & clips $40 pr SOLD
Parchment door panels & arm rests $125 for the pair.SOLD
No headliner.
Cab is in bad shape, both front fenders are dented beyond repair.
Doors have some dents & a speaker hole in each, no rust or hinge cracks $100 each bare doors.
Core support $85
Any other parts you see ask & I'll price, all prices are + shipping
Truck is also for parts locally.
Thanks,
Tom

[t korinek]

Some more pics

[JVictor75]

Power steering box and steering column. My zip is 85233 (Gilbert Arizona), so I shouldn't need delivery.

[gmc 2500 4x4]

i'm intrested in "16 wheels shipped 14063 thanx, paul
i should add i have a 3/4 ton 4x4 and my hub width is 4-3/4"
ram horns i need if they are straight outlets

[t korinek]

JVictor75 $80 for the steering column, $60 for the power steering box, this truck is not power steering, but i have one off a truck I parted recently that worked good.

GMC2500 4x4 $45 shipping for the 2 rims, I'd still have to measure the centers if interested.

[JVictor75]

Originally Posted by t korinek

JVictor75 $80 for the steering column, $60 for the power steering box, this truck is not power steering, but i have one off a truck I parted recently that worked good.

Cool, sent you a PM

[t korinek]

shawno72 $55 shipped for the 2 pulleys.
projectjimmie $35 shipped for the tailgate trim.

[projectjimmie68]

I will take it...Paypal or money order? Thanks

[shawno72]

Originally Posted by t korinek

shawno72 $55 shipped for the 2 pulleys.

Pm sent.

[shawno72]

Interested in the crank and water pump pulleys shipped to 95240 business addy.

[projectjimmie68]

How much for the tailgate trim if you will separate???????? Thanks

[gmc 2500 4x4]

i'll take tom, please check on measurement. no hurry
i think they might be different cause i'm 4x4. fingers crossed!! lol
when ya get wheel off, also check the nubs for me. these need to be 12" across. the rim pic posted might be 10-1/2" and wont work for me

[Levi.Johnson]

How is drivers side door panel? How is the chrome on both? Any stains?
If all good, will take them?
Posted via Mobile Device

[DeadheadNM]

Tom - Is that $175 for inner/outer grill? If so what's the condition of the outer grill. May be able to arrange pick up in Phoenix. Thanks, Pete

[JeffD72]

Originally Posted by DeadheadNM

Tom - Is that $175 for inner/outer grill? If so what's the condition of the outer grill. May be able to arrange pick up in Phoenix. Thanks, Pete

Tom - I would like to get in line for the Grill if Pete passes.

[SunSoaked]

Tom,

I'm interested in the tail light housings and lens. How much to add them to the tailgate?

Thanks

[blap]

Tom how are the inner ft fenders

[Willox]

In what shape is the core support? Shipping to 39553.
Posted via Mobile Device

[SunSoaked]

Can you get a photo of the inside of the tailgate with it down. Would you take $200 if I pick it up?

Thanks

[Kent63]

Tom, I would like to get in line for the tailgate pending shipping costs to 66436. Also, would you mind posting a couple more pics?

Kent
Posted via Mobile Device

[t korinek]

projectjimmie68 PM sent

gmc 2500 4x4 I'll let you know asap on the rims.

DeadheadNM $175 for both, I'll get more pics, it is a pretty decent outer, it looks like it was replaced at one time & then just sat around, some scratches etc, no major dents.

Levi.Johnson will get pics

Blap, front inner passenger looks good, but I haven't taken it off yet $80 if its good.
The driver side inner is bent badly, but I have quite a few of them off in good shape for $70 ea

Willox core support looks good, will get shipping quote.

Sunsoaked, I'll take $200 picked up

Kent63 your next on the gate, more pics to come.

Thanks,
Tom

[brian mac]

Inline on doors pending close up pics. pm sent with my e-mail address.

[SunSoaked]

Originally Posted by t korinek

projectjimmie68 PM sent

gmc 2500 4x4 I'll let you know asap on the rims.

DeadheadNM $175 for both, I'll get more pics, it is a pretty decent outer, it looks like it was replaced at one time & then just sat around, some scratches etc, no major dents.

Levi.Johnson will get pics

Blap, front inner passenger looks good, but I haven't taken it off yet $80 if its good.
The driver side inner is bent badly, but I have quite a few of them off in good shape for $70 ea

Willox core support looks good, will get shipping quote.

Sunsoaked, I'll take $200 picked up

Kent63 your next on the gate, more pics to come.

Thanks,
Tom

Ok, I'll take it. I'll PM you to work out Pmt and time we can meet. I'm in Yuma, so I'll have to drive over. Thanks

[DeadheadNM]

Originally Posted by t korinek

DeadheadNM $175 for both, I'll get more pics, it is a pretty decent outer, it looks like it was replaced at one time & then just sat around, some scratches etc, no major dents.

Sounds good Tom. Thanks.

[t korinek]

grilll pics