47-54 ultimate ifs sale

[robnolimit]

This is for 47-54 A.D. Trucks ONLY. (we are making the same deal on 49-54 chev car IFS) This is for our No Limit Air Glide IFS (bags) and Road Glide IFS (coil-overs). Sale price $1699 + $100 shipping (lower 48). These IFS kits are Complete and include the crossmember and upper mounts, bags and shocks (Air Glide) or billit coil overs (Road Glide), Tubular upper and lower A-arms, POWER rack (manual is the same $$) tie rod ends, No Limit forged Smart-Spindle, 2" drop with forged in caliper mounts, 11" rotors, 4 3/4"x5 lug (4 1/2" x 5 is avail, same $$, no 6 lug avail) Calipers, pads, all bearings, seals, hardware and boxing plates.
Yes 6 cyl will fit
No, I don't have p/s mounts for 6 cyl
Ride Hieght the running board will be 6" to 7" off the ground with a 26" front tire
No The Air Glide will NOT "lay running board" it will be 1" to 1 1/2" off the ground aired out.
Track Width is 58 1/2", so the tires will have a nice fit
Rim Size 15" minimum to clear the brakes. 7"wide use 3 1/2" backspace, 8" wide use 4" to 4 1/4" backspace, 9" wide use 5" to 5 1/4" backspace.
Tire Size Best fit is 26" to 27" tall tire.
Ordering --- CALL THE SHOP 909-386-7637 - don't send p.m.'s
Delivery good in stock. We pull and assemble eack kit to order. Ships in 3 to 4 days, Fed Ex ground, 3 to 7 days.
Motor Mounts We have 'Trim-to-fit' mounts for $59 (sbc, bbc, ls) or Direct-fit mounts, welded to the crossmember for $100 (sbc, ls)
Here is my goal, this is a great IFS for these series trucks, and you guys don't know we make it. I can advertize it here on sale, or I can pay a magazine big $$, I'd rather give you guys the break. I want to buy the lot next to us to expand, so our goal is to convert inventory back into cash. Everybody wins.

[robnolimit]

picts of RoadGlide IFS

[Root2812]

2 questions.

1) How long will this bargain be going? Like many others on here, this is a thing I want to get but can't afford yet.

2) With the LS motor mounts pre-welded to the crossmember will the engine sit to where no firewall modification will be needed? I have seen the LS installed without modifying the firewall and not having to mod it would make life easyer.

Thanks

[AspecialZ]

I'm with him

[robnolimit]

Originally Posted by Root2812

2 questions.

1) How long will this bargain be going? Like many others on here, this is a thing I want to get but can't afford yet.

2) With the LS motor mounts pre-welded to the crossmember will the engine sit to where no firewall modification will be needed? I have seen the LS installed without modifying the firewall and not having to mod it would make life easyer.

Thanks

1) I would like to sell 50+ IFS kits in the next 60 days. We are also advertising this for chevy cars, 49-54, on a few sites.

2) Direct-Fit mounts will fit a SBC or LS in place with NO firewall mods. LS installs will need to use a set of sidemount adapter plates, such as Holley, Trans-Dapt, Energy suspension and others.

thanks for the interest

[kustom40merc]

Will one of the other guys 6 lug work on this kit ?

[robnolimit]

I think that the ECI 6-lug with billit hubs will fit. Or, use a billit adapter

[kustom40merc]

Would it be possible to get your setup with undrilled rotors and have them drilled to a 6 lug pattern ?

[robnolimit]

Originally Posted by kustom40merc

Would it be possible to get your setup with undrilled rotors and have them drilled to a 6 lug pattern ?

Sorry, but no. Besides, the 6 lug is on a 5.5" circle, while our rotor is designed for 4 3/4" or 4 1/2" circle. the isn't enough room to safely put the 6 lug in it.

[cwii]

Looks like a great set up, what kind of deal can we make that includes the fatbar 4 link with this sale?
Chuck

[robnolimit]

Originally Posted by cwii

Looks like a great set up, what kind of deal can we make that includes the fatbar 4 link with this sale?
Chuck

Yes. We have a package called a "Chassis Pack" this includes the Air-Glide or Road-Glide IFS, a complete Fatbar four bar (bags or coil-overs) Power brake kit, trim-to-fit motor mounts, and trans crossmember. This package is normally $3299. If we sub in the sale IFS price, we can do the package for $2939.00 + $100 shipping

[robnolimit]

sales = 8. Thanks for the orders

[robnolimit]

Up to 12. Keep 'em comin!

[AspecialZ]

Nice, I definately want the air glide setup, but I still need a few more paychecks yet, im 1/2 way there! LOL!
Posted via Mobile Device

[robnolimit]

Month is 1/2 over, 14 units out the door. Keep 'em comin'!!!

[robnolimit]

OK, 17 kits now. Thanks a bunch. I feel I need to put in a comment here, for us at No Limit, and for all of the professional hot rodders here.
We really are here to help. We want you to succeed with your build. We also want to make payroll, and be here next year. So, we can give you a small discount, OR free shipping, but NOT BOTH. Believe it or not, we have to pay for the metal, the gas, the hardware, and the shiping. If we go out of business, it doesn't help any of us. And remember, we're here to help! Thanks again.

[robnolimit]

21 out the door keep 'em coming! Remember we make this IFS for the 49-54 chevy cars as well. Thanks again.

[robnolimit]

24 - out the door. Still going strong!

[robnolimit]

we crossed the 30 kit mark. Thanks for the support.

[AspecialZ]

Question, do I still need to recess the firewall with the 350 mounts on the crossmember? Any idea of where this will place the motor using a HEI setup? thanks!

[robnolimit]

For AD trucks, our motor mounts place the motor (icluding tall valve covers) appx 1 1/4" from the firwall. An HEI will clead, and can be removed for service, with the stock firewall.

[AspecialZ]

Awesome news, thank you!
Posted via Mobile Device

[BobP3595]

Is this offer still available?
Posted via Mobile Device

[robnolimit]

Yes, we are extending the sale through SEMA, until nov 3

[robnolimit]

Great news. We do have to bump the price just a bit, to $1749 + $100 shipping. It's only 50 bucks but our costs have gone up. We will be holding the sale up to the end of the year. On Jan 1 they will go back up to $1949. MERRY CHRISTMAS